Tender For Remaining Work Of Auditorium Building In Nagarparishad C Us At Jhunjhunu (Excluding Cost Of Cement)
Tender Value
4.25 Crore
Estimated cost
Bid Submission
17 Aug 2026
7 days left
EMD
8.51 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhunjhunu → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Remaining Work Of Auditorium Building In Nagarparishad C Us At Jhunjhunu (Excluding Cost Of Cement)
BOQ
| Sl. No. | Item Description |
| 1 | SUB-HEAD- I - CIVIL WORK |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed: All kinds of soil |
| 3 | Add extra for foundation /trenches / drains for every additional lift of 1.5 mtr or part thereof in all kinds of soil. 1.5 to 3.0 mtr |
| 4 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 5 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 6 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Walls (any thickness) including attached pilasters, buttresses plinth and string course. |
| 7 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. |
| 8 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.M20 grade Nominal Mix / Design Mix |
| 9 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 10 | Stone work |
| 11 | 6.19 Supplying and fixing machine cut fine dressed Red/Pink sandstone dasa or coping, with full moulding if required laid oncement mortar 1:4 including pointing with admixture ofpigment matching with the stone shade. 75 mm thick |
| 12 | Wall lining butch work upto 10m height with Red/ Pink Sandstone 20 to 30 mm thick (machine cut edges) stone strips ofminimum length 300 mm and required width includingembedding every tenth layer and bottom most layer in masonryor concrte after making necessary chases of size 75x75 mmand by providing layer of 75 mm thick strips i/c 12 mm thickbed of cement mortar 1 : 3 (1 cement : 3 Coarse sand) i/c ruledpointing in cement mortar 1 :2 ( 1 white cement : 2 stone dust)with an admixture of pigment to match the shade of stonecomplete as per direction of Engineer in Charge. Exposed face machine cut |
| 13 | 7.5 Providing and fixing Granite stone slab mirror polished andmachine edge cut in walls, pillars, steps, Shelves, SillsCounters, Floors etc. laid on 12mm (Av.) thick base of cementmortar 1:3 (1 cement : 3 coarse sand) jointing with whitecement mortar 1:2 (1white cement : 2 marble dust) withpigment to match the shade of the marble slab includinggrinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) |
| 14 | (i) Up to 1500 Cm2 Tiles |
| 15 | (iii) Above 3601 Cm2 Slabs |
| 16 | Extra for fixing marble /granite stone over and abovecorresponding basic item, in facia and drops of width upto 150mm with epoxy resin based adhesive including cleaning etc.complete |
| 17 | Extra for providing opening of required size & shape for washbasins/ kitchen sink in kitchen platform, vanity counters andsimilar location in marble/Granite/stone work includingnecessary holes for pillar taps etc. including rubbing andpolishing of cut edges etc. complete |
| 18 | 7.6 Extra for providing edge moulding to 15-18mm thick marble/Granite/Kota stone counters, Vanities etc. including machinepolishing to edge to give high gloss finish etc. complete as perdesign approved by Engineer-in-Charge. Granite/Kota Stone Work (ii) Half Edge moulding |
| 19 | 8.13 Providing and fixing external grade board solid core singleleaf flush door shutters ISI 2202-67 marked using Phenolformal dehyderesin in glue both sides with approved steelfittings complete as per annexure 'A' : |
| 20 | 35 mm thick .8 Decorative teak veneer both side |
| 21 | 30 mm thick . Decorative teak veneer both side |
| 22 | ACOUSTIC DOOR FRAME & SHUTTERS :Providing and fixing teak wood door frame of section 145mm x 75mm with heat activated intumescent fire seal strip of size 10mmx4mm blub type (Astroflame U.K.) and Raven RP 24 (Australia) heavy duty seal on all three side of frame. With 77mm thick-48db acoustic cum fire door of 60 minutes fire rating fabricated with two 12 mm thick Mag Aco Magnesium board 99% without asbestos, Brucite and Meerschaum having a density not less than 980 kg/M3 and thermal conductivity 0.44 W/m*K sandwich between 1 layer of 50 mm thick 96 kg/m3 rockwwol insulation coated with FR acrylic sealent with 3 mm sound dampning isolation membrane. The insulation is supported adequately to avoid sagging and all corners of the internal frame of door shall have 3xd65mm rubber strips dully grooved in. The door shutter is finished 6mm thick commercial ply on) both side and finally finished with 1mm laminate. The door shutter shall have fire and smoke seal of 10x 4mm on all three sides and the rebated side of double leaf door shall have 10x4mm blub type seal fire and smoke seal along with Raven RP16 Astragal Seal for rebated meeting styles. Raven RP38 heavy duty automatic bottom seal shall be used leaf of fire cum acoustic door be manufactured by SRD -2000X2100(H) (double leaf), 1200X2100(H) (single shutter) make Earcons,Acoustic,Global,Navair) |
| 23 | PANIC PUSH BAR FOR DOOR SHUTTER Earcon Providing & fixing push bar panic tested in accordance with meeting UL-CE, EN 1125 – rim device – stainless steel for exit device double/single leaf doors Make ozone,Dorma,Haffle) |
| 24 | Supply and fixing of Bath room / Toilet door shutter with 16mmFactory Laminated Cement Bonded Particle Board BISON Lam (IS14276) door shutter with all-round „U‟ lipping of PPS section of size12mm X 18mmX 12mmX0.6mm thickness with a hardware of 12mmdia X200mm long aluminum aldrop – 2 nos2 No of 125mm longhandles and also 3 no Of IS304 grade Patee Hinges3mmX12mmX180mm long with pole receiver of 10mm dia poleX40mm long welded on 2mm X40mm(ss304) plates works asreceiver for RT patte hinges. The price inclusive of all material atsite. |
| 25 | Providing and fixing double action hydraulic floor spring ofapproved brand and manufacture IS : 6315 marked, for doorsincluding cost of cutting floors as required, embedding infloors and cover plates with brass pivot and single piece M.S. With brass cover plate |
| 26 | Supply and fixing of solid stainless steel grade 304 C typedoor handle of dia 32mm length 600 (outside measurement)having hole dia 14 mm of with i/c key arrangement. |
| 27 | Galvanised iron 8mm Outer Diameter M-6 dash fastener 50 mm long |
| 28 | Providing and Fixing Akuslats by NSA perforated wooden slats wall panels of 300mm x2400 mm 16 mm MDF Melamine Front Side: Grooved, axial distance of grooves 16mm, groove width 3mm Back Side Covered with acoustic fabric. The panels shall be mounted with special nail guns on 18mm mdf mechanically fastened on GI metal frame of 50 x 50mm comprising of Floor & Stud Channel making a grid of 610 x 610mm c/c. 50mm rockwool with 48kg/m3 density to be installed between the GI frame.makes AKUSLATS,ESK,SOUND TRUST |
| 29 | Providing and fixing AkustikFab by NSA Acoustical Wall paneling with square edges made of fibre glass substrate 25mm thick witha density of 120kg/m3 and wrapped with grippers fire-resistant fabric with an option of colours as per site/architect providing a maximum sound absorption level of 0.90 NRC to be affixed to wall made up of wooden battens 40mm x 40mm with 1200 x 1200mm spacing using construction material as per the instruction make NSAFAB, CINEVIEW,ECOPHON |
| 30 | 9.6 Providing and fixing pressed steel door frames confirming toIS 4351 manufactured from commercial mild steel sheet of1.25 mm thickness including hinges jamb, lock jamb, bead andif required angle threshold of mild steel angle of section50x25mm, or base ties of 1.25mm pressed mild steel weldedor rigidly fixed together by mechanical means, adjustable lugswith split end tail to each jamb including steel butt hinges2.5mm thick with mortar guards, lock strike-plate and shockabsorbers as specified and applying a coat of approved steelprimer after pre-treatment of the surface including filling withCC 1:2:4(M15 grade) complete as directed by Engineer-incharge: Profile B |
| 31 | Providing and fixing 1mm thick M.S. sheet sliding-shutterswith frame & diagonals braces of 40 x 40 x 6mm. angle iron3mm M.S. gusset plates at the junction and corners, 25mm diapulley 40x40x6mm angle and T-iron guide at the top andbottom respectively including applying a priming coat ofapproved steel primer. |
| 32 | Steel work in built up tubular trusses including cutting,hoisting ( height upto 10 m)fixing in position and applying apriming coat of approved steel primer, welded and boltedincluding special shaped washers etc. complete.9.3.3 Electric resistance or induction butt welded tubes. |
| 33 | Providing and fixing in position collapsible steel shutters withvertical M.S. Channels 20 x 10 x 2mm and bracket with flatiron diagonals 20 x 5mm. size with top and bottom rail of Tiron40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearingcomplete with bolts, nuts locking arrangements inside andoutside stoppers, handles etc. as per specification includingapplying a priming coat of approved steel primer. (To bemeasured and paid as per outer dimension). |
| 34 | Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide |
| 35 | Providing and fixing stainless steel railing made of Hollowtubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (wherever required)and fitting the same with necessary stainless steel nuts andbolts complete, i/c fixing the railing with necessaryaccessories & stainless steel dash fasteners , stainless steelbolts etc., of required size, on the top of the floor or the side ofwaist slab with suitable arrangement as per approval ofEngineer-in-charge, (for payment purpose only weight ofstainless steel members shall be considered excluding fixingaccessories such as nuts, bolts, fasteners etc.).(b) Grade 204 |
| 36 | Providing and fixing 50mm thick cement concrete flooringwith Metallic concrete hardener topping, under layer of 38mmthick cement concrete 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm thick nominal size) and toplayer of 12mm thick metallic concrete hardener consisting ofmix 1:2 (1 cement : 2 stone aggregate, 6mm nominal size) byvolume & mixed with metallic hardening compound ofapproved quality @ 2Kg./Sqm including cement slurry,rounding off edges etc. but excluding the cost of nosing of stepetc. complete. |
| 37 | \\"Providing & Fixing of Flocked textile floor of Nylon 6.6 face fiber or equivalent of approved make with 100% Nylon and completely water proof resilient backing. The flooring should be Anti static with thickness of 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The carpet should be completely stain resistant and of a density approx. 80 million fibers/sq.mtr (70 million fiber/sq.yd) in the width of 2 mtr .The floor covering should have Fire Test EN-13501, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, anti-microbial treatment, with resilient waterproof backing, anti allergic which is certified by British allergy foundation. The carpet should have permanent static contro. The work should be carried out by the authorized installer of the Company in India. Carpet should be laid on zero leveled surface. Carpet should be stick with SR 998 on the floor.makes : ccil,omk |
| 38 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Light shade using shade cement. |
| 39 | 7.5 Providing and fixing Granite stone slab mirror polished andmachine edge cut in walls, pillars, steps, Shelves, SillsCounters, Floors etc. laid on 12mm (Av.) thick base of cementmortar 1:3 (1 cement : 3 coarse sand) jointing with whitecement mortar 1:2 (1white cement : 2 marble dust) withpigment to match the shade of the marble slab includinggrinding, rubbing and polishing complete. 7.5.6 Rajasthan Black(ii) 1501 Cm2 to 3600 Cm2 Tiles |
| 40 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm |
| 41 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab from 2001 to 5000 Sqcm |
| 42 | 25mm thick wooden planking, tongued and grooved in flooring including fixing with iron screws complete (Lower frame to be paid extra) with :First class Teak wood. |
| 43 | 7.22 P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigmentetc complete.size 600 mm X 1200 mm |
| 44 | 7.24 P & F 1st quality Heavy Duty Vitrified glazed MAT tiles onfloor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in allcolour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigmentetc complete. size 600 mm X 1200mm |
| 45 | 7.25 P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in allcolour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigmentetc complete.size 600 mm X 1200mm |
| 46 | Providing and fixing 1st quality standard Marble printed/ Granite Shade or Light/dark shad glazed tiles confirming to IS : 13753 & IS :15622 of size 300mm x 600mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost ofcement plaster on walls and pillar). |
| 47 | 10.32 Providing and fixing calcium silicate perforated board false ceiling at all heights including providing and fixing of frame work made of special sections power pressed from M.S. sheetand galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling withdash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mmcentre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm eachhaving clips of 10.5mm at 450mm centre to centre shall befixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the calcium silicate board with ceiling section and perimeter channels0.5mm thick 27mm high having flanges of 20mm and 30mmlong, the perimeter of ceiling fixed to wall/partition with thehelp of rawl plugs at 450mm centre to centre with 25mm longdrive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of theboard with recommended filler, jointing tapes, finisher andtwo coats of primer suitable for board as per manufacturesspecification and also including the cost of making openingsfor light fittings, grills, diffusers, cutouts made with frame ofperimeter channels suitably fixed all complete as per drawingand specification and direction of the Engineer in Charge butbut excluding the cost of painting of thickness of calciumsilicate board as below:- 8 mm thick |
| 48 | 10.35 Providing and fixing tiled false ceiling of approved materialsof size 595X595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams per sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24X38 mmmade from 0.30 mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24X25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200X600 mm and secondary cross “T” of length 600 mm and size 24X25 mm made of 0.30 mm thick (minimum) sheetto be interlocked at middle of the 1200X600 mm panel to form grids of 600X600 mm and wall angle of size 24X24X0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings,fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 X 37 X 25 X 1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods withgalvanized butterfly level clips of size 85 X 30 X 0.8 mmspaced at 1200 mm center to center along main T, bottomexposed width of 24 mm of all T-sections shall be prepaintedwith polyester paint, all complete for all heights asper specifications, drawings and as directed by Engineer-incharge.GI Metal Ceiling Lay in Plain Tegular edge Global whitecolour tiles of size 595X595 mm, and 0.5 mm thick with 8mm drop, made of G I Sheet having galvanizing of 100gms/sqm (boths ides inclusive) and electro statically polyesterpowder coated of thickness 60 microns (minimum), includingfactory painted after bending. |
| 49 | Providing and fixing false ceiling at all heights with of Stretch Fabric Finish FR Grade having Flammability as per FMVSS 302 Fabric with the help of PVC Track 25 mm half wrap and mid seam. Magnesite Bonded Wood Wool Panel1200x600x15 mm meet the stringent fire test required having Class ‘P’ rating for Ignitability test as per BS 476 part 5 and Class ‘1’ rating as per BS 476 part 7 for Surface Spread of Flame test. Class ‘P’ and Class ‘1’ are the highest rating. BS 476 part 6 Fire Propagation index and for Flaming ISO 1182 and Smoke density as per ASTM E 662 besides base panel conform to EN 13168 2000panel is fixed on screw fixed on comprising frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick, pressed section (galvanizing @120 grams per sqm ) i.e cross channel of size 80 x 26 x 51 mm (wight approx 480 gm/mtr), fastened to wall, positioned vertically in a regular manner at 600mm c/c. Perimeter channel section of size 20x 28 x 30mm fixed to the all perfarry of using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt.The extra channel must be used at openings and junctions as required.The channel will come at every 600 centre to centre.Magnesite Bonded Wood Wood Panel is to be fixed on channel with the help of steel screws at every 230 mm. FS25 Track should be fixed directly by stapling to the Magnesite Bonded Panels and track should be supported from channel with 100x8 mm Ply Strips. Polyester Wadding 1000 gsm , 25 mm thick having flammibality - IS 15061-2002 Annexure clause A 3.2 will be paste on Magnesite Bonded Wood Wool Panels then stretch FR Grade Fabric to be stretched on these tracks with 1200mm module or as per the drawing. This system having 0.90 NRC as per IS:8225/ISO:354/ASTM 423C. (Make: Anutone ,Earcons Acoustic , Hera Design ) |
| 50 | Providing and installation of Poly Carbonate Sheet roofing over existing steel framing as per drawing and design including fixing with non-corrodible nuts and water proof washers as per instruction of Engineer-in-charge.(ii) 10 mm thick |
| 51 | Providing & fixing 50mm extruded polystyrene (XPS)insulation board density 36kg/m3, under or over RCC roof slab complete as per manufacturing specifications fixed with 1% suitable water based adhesive and fastener, complete in all respect as per the direction of Engineer-in-Charge. |
| 52 | Plaster on new surface on walls in cement sand mortar 1:6including racking of joint etc. complete fine finish : 12mm thick.12mm thick. |
| 53 | Plaster on new surface on walls in cement sand mortar 1:4including racking of joints etc. complete fine finish : 20mm thick . |
| 54 | 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) |
| 55 | 6mm thick cement plaster 1:3 ( 1cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C slabs andbeams. |
| 56 | Providing and applying protective plaster, 10 mm using HighPerformance, Hydrophobic, Waterproof, Non-Sag, Cohesive, Water Retentive, Breathable, Drying Cementitious, Premixed Plaster For Interio or Exterior Application SS - HydroNil PM @ 16 kg / m2 [Recommended] |
| 57 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.New Plastered Surface (three or more coats) |
| 58 | 12.44 Finishing walls with textured exterior paint of required shadeas per approved colour complete as per manufacturersspecifications including primer coat and protecting coatincluding scaffolding and safety provision. Trowel Finish av. thickness 2000 to 2500 microns. |
| 59 | Painting the wooden / metal surface with synthetic enamel paint of approvedbrand and manufacture to give an even shade Two or more coats on new work |
| 60 | Providing and applying superior quality emulsion for wallpainting with Velvet touch/Royal paint etc of approved brandand manufacture to give an even shade with putty andpreparation of surface applying with the help of paint roller thework complete in all respect as per direction of Engineer-incharge. New Work Three or More coat |
| 61 | Wall painting with Royal Play paint with various types ofdesigns as approved of approved brand and manufacture togive an even shade including all scaffalding.Two or more coats on New work including preparation of basewith primer, putty lippy etc. Complete in all respect. |
| 62 | Providing and fixing steel glazed window frame made out of80x40 mm hollow sheet section of 16 gauge thickness, jointmitred welded and grinded including hold fast of steel lugs13mm x 3mm and 15 Cm long embedded in C C block 15 x10 x 10 Cm of 1:3:6 nominal concrete and including fixing ofpivoted hinges of superior quality, window shutters made outof 50 x 25.0 mm hollow steel section 15 mm paitam of 18gauge thickness, joint mitred and grinded including 10mm x10mm square bars welded to frame for paitam fixing floatglass 4mm thick panes with glazing clips and metal sash puttyand fixing of shutters frames peg stay, U shape handle 100mm long, tower bolts 100 mm long of steel powder coatedsuperior quality including fixing and jointing with framehinges priming coat with steel primer complete in all respectas per direction of Engineer-in –charge |
| 63 | Window fixed. |
| 64 | Window openable. |
| 65 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) |
| 66 | Supply and fixing of polycrete wall fencing of existing wall,fencing of 0.9 mtr. Height above the existing wall, mainmember PVC profile section of size 125mmx125mmx900mm(c/c 1.67 mtr. length) with a wall thickness of2.00mm+0.20mm and Horizontal panel PVC profile section ofsize 305mmx20mm (3 nos. 1.6 mtr. length) with wall thickness1.00mm + 0.1mm and side edge covered with PVC C-Sectionof size 24mm x18mm with a wall thickness of2.00mm+0.20mm Horizontal panel reinforced with G.I.section (C-Type) with a wall thickness of 1.20+0.10mm andhorizontal panel having side in main member groove (verticalpillar 125x125mm) all complete as per design specificationand as direction by Engineer in charge. |
| 67 | Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali , CNC (Computer numeric control) routed of approved design by Engineer in -charge which are machine cut for duct /shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers ( wood powder/ rice husk / wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N /mm2 , modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A category with properties of being termite / borer proof, water / moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. MAKE ALSTONE,RENOARCH |
| 68 | Providing and fixing Structural glazing work with toughenedglass of 6mm thick and reflective colour as approved in darkshade like Blue/Dark Blue etc. with frame work of curtainsection 65x60mm (Weight 1.64 kg/m min.) made ofaluminium with chrome plating. Internal frame work will alsobe of curtain section 65x60mm of chrome plated aluminiumsection with20x20mm aluminium tube section and structuralspacer made of rubber. The aluminium frame work size as perinstruction of Engineer-in-charge and including openablepanels with all necesary sections and fitting.The work includesilicon structural adhesive for complete gripping of glass withframing members and silicon weather seal sealant to preventmoisture/water through joints. Glass will be fixed in plumband with uniform spacing of 10-12mm wide duly filled withsilicon weather seal sealant. The work includes alllabour,scaffolding , structural aluminium work, toughenedglasses,silicon weather seal sealant, silicon structural adhesivestructural spacer, all accessories like handles, peg stays, M-15grade cement concrete for fixing holdfast .(Face area of glassshall be measured) |
| 69 | Providing and applying two component hybrid polyuria polyurethane water proofing system at all levels for podium garden waterproofing by the manu facture or his approved applicator consisting following operations – A) Brushing and Vacuum cleaning the surface to make free from any loose material, oil, grease, burr, dirt, dust etc. B) Repairing the surface if required, as per recommendation of manufacture or his approved applicator to make it water tight for which nothing extra shall be paid. C) Providing and applying by brush or roller , Damp Tolerant , solvent free resin / epoxy penetrating primer mixed in proportion by volume / weight as recommended by manufacture over cement concrete surface in dry condition, having consumption varies from 0.20 to 0.30 kg/sqm depending on the porosity and undulations in the surface to form Nominal 0.20 WFT Coat. D) Over primed surface, providing and applying Solvent Free, Two Component (ASTM D 16, Type V), Polyurethane Coating System, Non-Tar Extended, Standard 1.00 mm with Highly Elastic Base Coat 0.50 mm for high crack spanning capability. Tough durable film, highly resistant to mechanical damage and totally impervious to water immersion. Product shall not emit any Volatile Organic Compounds (VOC) or odor and will be totally environment friendly. mixed in proportion by volume / by weight as recom mended by the manufacturer having elongation >400%, System Hardness > 65 Sore D (ASDM D 2240), tensile strength of minimum of >16 MPa as per ASTM D 241 and System Crack Bridging (EN 1062-7) > 8 mm. e) A layer of non woven polypropylene geotextile of minimum mass / unit area of 200 gsm with an overlap of 75 mm shall be laid over the polyurea/polyurethane coating surface. makes DryThane,Sika,Pdlite |
| 70 | Grading roof for water proofing treatment with water proffing compound 10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 71 | Providing & laying broken glazed titles on roof ( brokenglazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30Kg/Sqm. Of VG-10 (80/100) grade) and joints filled withcement mortar 1 :2 (1 cement:2 marble dust mixed with waterproofing compund all complete as per direction of Engineerin-charge. |
| 72 | BATHROOM WATER PROOFING Providing and laying two coats of a Two Component, Cementitious Crystalline Coating System, such as SS – CrystoSeal 2K, upto 900 mm over the FFL on the vertical wall surface and on the complete slab surface post construction and curing or fillets on the joints of walls & floor. The Crystalline Coating system is to be mixed and applied as per the manufacturer’s recommendations and water cured for a period of atleast 5 days, preferably 7 days. Consumption: 2.5 kg [2 kg SS – CrystoSeal 2K Component A (Powder) with 0.20 kg SS – CrystoSeal 2K Component B (Liquid) and 0.3 to 0.35 kg water] / m2. Sprinkling sharp dry silica sand over the second coat to provide mechanical key for screed. Applying a dash / chhaat coat over the coating, wet-in-wet. makes DryThane,Sika,Pd lite |
| 73 | MISCELLANEOUS WORK |
| 74 | Supplying and fixing Rollor Blinds of good quality and approved make made out of Imported fabric including Roller Mechanism and lock with chain system with all necessary hooks etc. complete as per direction and sample approved by engineer-in-charge. |
| 75 | P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor |
| 76 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor |
| 77 | P. & F Squatting Pan (Indian type) white glazed vitreous china 1st quality W.C. Pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest.) Size 580mm |
| 78 | P & F Premium quality Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make as per Engineer-in-charge with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : |
| 79 | P & F Premiumquality water closet Seat Covers with brass hinges complete Solid PVC (ISI marked) grade-I White for EWC. |
| 80 | Providing & Fixing premium qulaity WVC Wash basin with C.I. brackets duly painted & 32 mm C.P. brass waste coupling of approved make with PVC waste pipe completeSize 550 mm x 400 mm dia for counter top. |
| 81 | P&F Looking Mirror 5mm thick of approved make with ornamental frame size 50x12 with 6mm Ply Board on Back Side Complete as per approved sample |
| 82 | 1.0 mm thick stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling.45 x 20 x 8 20x16x8 (with drain board) |
| 83 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 610x400x80mm. |
| 84 | P & F C.P. brass Urinal Flush Pipe set complete with flanged brackets of approved make.For 1 Urinal |
| 85 | P & F C.P. brass Urinal Spreader for stall urinal of approved make. |
| 86 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge |
| 87 | Pillar Cock 15 mm nominal size |
| 88 | Swan neck pillar cock 15 mm nominal size |
| 89 | Bib Cock with long thread 15 mm nominal size |
| 90 | Long body Bib Cock 15 mm nominal size |
| 91 | Two way Bib Cock 15 mm nominal size |
| 92 | Angular stop cock with long thread 15 mm nominal size |
| 93 | Concealed stop cock 15 mm nominal size |
| 94 | 600 mm long towel rail |
| 95 | Revolving type towel ring |
| 96 | Soap dish |
| 97 | Double coat hook |
| 98 | Shower arm |
| 99 | Paper holder |
| 100 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 101 | Gun-metal 15mm nominal bore. |
| 102 | Gun-metal 25mm nominal bore. |
| 103 | Gun metal 32mm nominal bore. |
| 104 | Gun metal 40mm nominal bore. |
| 105 | Gun metal 50mm nominal bore. |
| 106 | Gun metal 65mm nominal bore. |
| 107 | P & F PVC Storage Tank (IS : 12701marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litr. |
| 108 | Hoisting Charges for each floor : For 1000 lit. tank |
| 109 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) |
| 110 | 20mm nominal outer dia pipes |
| 111 | 25 mm nominal outer dia pipes |
| 112 | 50 mm nominal outer dia pipes |
| 113 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) |
| 114 | 20mm nominal outer dia pipes |
| 115 | 25 mm nominal outer dia pipes |
| 116 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 117 | 15 mm nominal outer dia pipes |
| 118 | 20mm nominal outer dia pipes |
| 119 | 25 mm nominal outer dia pipes |
| 120 | 32mm nominal outer dia pipes |
| 121 | 50 mm nominal outer dia pipes |
| 122 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 160 mm dia |
| 123 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 63 mm dia |
| 124 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 125 | Door Tee,110mm dia |
| 126 | Door 'Y',160 mm dia |
| 127 | Double 'Y',160 mm dia |
| 128 | Door Bend (Top Side),160 mm dia |
| 129 | Providing & Laying C.C. 1:3:6 (Stone Agreegate 20mm nominal size) all around PVC Pipe including 7.5 cm thick bed concerte [Width & Height = Dia of Pipe in CM+15CM] excluding cost of Pipe & Excavation of trenches etc.PVC pipe 160 mm dia |
| 130 | Providing & Laying C.C. 1:3:6 (Stone Agreegate 20mm nominal size) all around PVC Pipe including 7.5 cm thick bed concerte [Width & Height = Dia of Pipe in CM+15CM] excluding cost of Pipe & Excavation of trenches etc.PVC pipe 110 mm dia |
| 131 | Providing and Fixing Unplastricized Poly Viny Chloride (UPVC) SWR Pipe Type B for sciland waste discharge system (IS 13592 : 1992 Marked ) of approved quality / make. 110mm dia |
| 132 | PVC Pipe 110 mm dia |
| 133 | PVC Pipe 75mm dia |
| 134 | Providing and Fixing Unplastricized Poly Viny Chloride (UPVC) SWR Pipe fitting Type B for sciland waste discharge system (IS 13592 : 1992 Marked ) of approved quality / make. 110mm dia |
| 135 | Single tee with door 110mm |
| 136 | Bend 87.5 110mm |
| 137 | Door Bend 87.5 Dg. 110mm |
| 138 | Single tee 75mm |
| 139 | Nahani trap with Jali 110mm |
| 140 | Pipe Clips 110mm |
| 141 | Vent Cowel 110mm |
| 142 | Single 'Y', 110mm |
| 143 | Single 'Y' with Door 110mm |
| 144 | Double 'Y' with Door,110mm |
| 145 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth upto 0.5 M. |
| 146 | Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design :Depth up to 1.5 M |
| 147 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 100mm thick C.C. 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Depth up to 0.5 M |
| 148 | Inside size size 600X 600 mm depth upto 0.5 M Cement cover with frame. |
| 149 | Inside size size 450X 450 mm depth upto 0.5 M Cement cover with frame. |
| 150 | Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. |
| 151 | P & F Square-mouth gully trap ‘A‘ grade (IS :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size 300 X 300mm. |
| 152 | Construction of septic tank in all types of soil with 40 cm. Thick masonry in CM 1:6 15 Cm thick C.C bed of 1:5:10 M grade C.C flooring & over stone slab covering, 80 mm thick slab jointing of slab in CM 1:3 Ralthal, Kharajna, 50 mm thick stone pratition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design, two No. 450 mm dia 25 Kg each CI cover with frame, earth work etc. complete as per approved drawing including disosal of surplus earth within a lead of 50 mtr. Size 400 x140x150 cm.(for 50 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways including shuttering complete in all respect. |
| 153 | Construction of Soakage well in all types of soil of approved drawing, top 90 Cm. Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering, jointing of slab in CM 1;3, Ralthal, kharanja 40mm thick M-15 grade C.C. flooring , earth work etc. complete including disposal of surplus earth within a lead of 50 mtr. Size 240 Cm. dia outside & 240 Cm. depth. |
| 154 | P & F Grating of approved quality/make : Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make |
| 155 | P & F Liquid Soap Container with brackets complete of approved make C.P. brass. |
| 156 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. |
| 157 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete Brass wt. Not less than 300 gm,15mm. |
| 158 | P & F Extension Pipe for bib cocks of approved quality/make.C.P. brass of Heavy & Superior quality 50x15mm |
| 159 | P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 600mm |
| 160 | Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete :250mm dia Internal |
| 161 | Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete :300mm dia Internal |
| 162 | P & F Bottle Trap of approved make : C.P Brass 32 mm |
| 163 | P& F waste Coulping with fittings of approved quality /make: C.P. Brass 50 mm dia |
| 164 | Providing & fixing C.I. Saddle pieces 100mm dia with nut & bolt & washer & Rubber Gasket complete as per direction of engineer in charge |
| 165 | Supplying and fixing C.I. Cover with frame, C.I. gratings for chambers & man holes. |
| 166 | Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 2905. 300 mm dia |
| 167 | Three Seater Sofa Supplying, and placing in position of three-seater sofa with a sturdy hardwood frame, high-density polyurethane foam cushions, and premium leather or fabric upholstery. Features include padded armrests, ergonomic back support, and strong wooden or metal legs. Available in various colors with optional removable cushions. Certification and from the approved make of Durian, Godrej, Studio Neos, Amit Furniture. The product should be as per above given specification under the guidance of project architect in charge. |
| 168 | Two Seater Sofa Supplying, and placing in position of two-seater sofa with a sturdy hardwood frame, high-density polyurethane foam cushions, and premium leather or fabric upholstery. Features include padded armrests, ergonomic back support, and strong wooden or metal legs. Available in various colors with optional removable cushions. Certification and from the approved make of Durian, Godrej, Studio Neos, Amit Furniture. The product should be as per above given specification under the guidance of project architect in charge. |
| 169 | Single Seater Sofa Supplying, and placing in position of single-seater sofa with a sturdy hardwood frame, high-density polyurethane foam cushions, and premium leather or fabric upholstery. Features include padded armrests, ergonomic back support, and strong wooden or metal legs. Available in various colors with optional removable cushions. Certification and from the approved make of Durian, Godrej, Studio Neos, Amit Furniture. The product should be as per above given specification under the guidance of project architect in charge |
| 170 | AUDITORIUM CHAIR MODEL:- Supplying, and ergonomic auditorium chairs designed for durability and comfort, featuring a robust steel or aluminum frame with high-density molded polyurethane foam. These chairs come with a manual tip-up seat mechanism and a pushback function, upholstered in high-quality fabric or leatherette. Armrest options include PU integral or wooden finishes, with additional features such as writing tablets or cup holders. The floor-mounted base, equipped with anti-slip pads, ensures stability. With foam density of 50 ± 3 kg/m³, the seat base dimensions range from 42.5 - 45.5 cm (W) x 46 - 49 cm (D), while the backrest measures 42.5 - 46 cm (W) x 64 - 75 cm (H). The PPCP plastic cover incorporates an acoustic and assist design, and the fabric is 100% polyester, FR grade, tested for 50,000 abrasion cycles. A 65 - 70 micron powder coating enhances durability. Certification and from the approved make of Durian, Godrej, Studio Neos, Amit Furniture. The product should be as per above given specification under the guidance of project architect in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender