Tender For Dnit For Furnishing Of Tourist Facilitation Centre At Red Bishop, Panchkula
Tender Value
4.34 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
7 days left
EMD
8700
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dnit For Furnishing Of Tourist Facilitation Centre At Red Bishop, Panchkula
BOQ
| Sl. No. | Item Description |
| 1 | S/I/T/C of 1.5 Ton Split AC 5 Star BEE rating with Auto Start Copper, Condenser rotary, Stablizer free operation, outdoor unit stand, self diagnosis, Dust Filter and 3 meter Installation kit having 1 year warranty on product, 10 year warranty on compressor and 5 year warranty on PCB with required labour and material completer in all respect as per satisfaction of EIC. (Make: Blue Star, Daikin, Toshiba, Hitachi). |
| 2 | New Reception Counter 10’-0”X 2’-3” X2-6”• Made of ¾” th. HDHMR Board finish with Teak wood Lipping on edges. Laminate in 2 colours (designer laminate or veneer with polish as/ shade and design) are to be provided in the front side facia over board with Teak wood Lipping/Beading on edges. • Provision switch Board and wires for computer System.• 18mm Th. Quartz/Italian Marble on the top with Champher finish over ¾” th. Board finish as/app.• Teak woode skirting out of 2”x3” finish as/app.• 1mm th. laminate in drawers, cabinet and all inside visible portion with provision of light fitting and wire.• Provision of Led Light if required as per design in the front facia.• Both side drawers plus cabinet and open shelf provision inside the counter.• Height of the Reception Counter is tentative can be increased if required as per design. |
| 3 | Two Seater Sofa With arms , seat 4’-0”wide overall dimension app.5’-0”x2’-5”x2’-9” seat height should be 1’-5”.Upholstery as per approved colour scheme. 4” thick foam of 40 density on seat and 2 ½” thick of 32 density on back over required spring base for seat and back over frame work made of soft wood leg as per design using teak wood sections out of 3`x3` for outer /exposed members required to give proper shape and strength. Polish as per approved. Complete in all respect as per satisfaction of EIC.Foam should be of sleepweel, Jindal or Feather. Complete in all respect as per satisfaction of EIC. |
| 4 | Single Seater Sofa 2-6”x2’-5”x2’-9”, seat height should be 1’-5”.Upholstery as per approved colour scheme. 4” thick foam of 40 density on seat and 2 ½” thick of 32 density on back over required spring base for seat and back over frame work made of soft wood leg as per design using teak wood sections out of 3`x3` for outer /exposed members required to give proper shape and strength. Polish as per approved. Complete in all respect as per satisfaction of EIC.Foam should be of sleepweel, Jindal or Feather. Complete in all respect as per satisfaction of EIC. |
| 5 | Center table 2’-6”x2’-6”x1’-6”Center Table with Italian Marble top over 3/4”th. comm. board with beading on edges. Teak wood leg member out of 2 ½” x1 ¼” and frame members out of 2 ½” x 1 ¼” as app. |
| 6 | Executive Medium Back Revolving chair of Godrej/Haworth//Steelcase make.The seat and back are made up of 1.2 plus 1.1cm. thick hot – pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Size:- 47.5cm (W) x 69.5cm(H) |
| 7 | Visitor Chairs in front of reception counter and around table made of stainless steel of gauze 304 finished as as per approved with upholstered seat over 2” thick feather/sleepwell foam of 32 density over required frame work . |
| 8 | Providing and Fixing 1 no. LED Signage of Size: 18’-0”x3’-0” with frame made out of 25 mm x 25mm MS pipe sections with stiffner at regular intervals, back panel of GI Sheet and front facia of 3 mm thickness ACP to be cladded on frame, Letters shall be of acrylic 3 mm with raising of 3 inches with LED modules of Samsung or equivalent and SMPS and wiring. |
| 9 | P/F Translit/ Clip on board of size: 2’-6”x3’-6” of nearly tourist resorts of HTC Complexes. To be selected by authority. |
| 10 | Providing and Fixing of 55” Ultra HD (4K) Smart LED Television with minimum 3840x2160 resolution, LED display panel, HDR support, built –in-Wi-Fi, Ethernet, Bluetooth, minimum 3 HDMI ports and 1 USB port, integrated speakers, Smart TV operating system with preloaded streaming applications, remote control, wall mounting bracket, power cord, all necessary accessories, fixing hardware, testing and commissioning, complete in all respects. Make-Samsung, LG, Sony. |
| 11 | P/F Roller blinds required accessories shade as/app. of vista / johnson/ Wintree make or equivalent. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender