Tender For Repair To Plumbing, Joinery, Sanitary In Officers Mess Alongwith Single Living In Blocks, Sncos Mess Alongwith Single Living In Blocks, Staff Quarter, Shopping Complex And Airmen Billet Of Camero Complex At Af Station Subroto Park And Inte
Tender Value
40 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
11 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Plumbing, Joinery, Sanitary In Officers Mess Alongwith Single Living In Blocks, Sncos Mess Alongwith Single Living In Blocks, Staff Quarter, Shopping Complex And Airmen Billet Of Camero Complex At Af Station Subroto Park And Internal/External Smart Periodical Services Roof Treatment In Officers Mess Alongwith Single Living In Blocks, Sncos Mess Alongwith Single Living Blocks, Staff Quarter, Shopping Complex And Airmen Billet Of Camero Complex At Af Station Subroto Park
BOQ
| Sl. No. | Item Description |
| 1 | S&F 15mm bore steel water tubing medium grade, galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors, Including taking down steel tubing or removing from site, complete all as specified and directed. |
| 2 | S&F 20mm bore steel water tubing medium grade, galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors, Including taking down steel tubing or removing from site, complete all as specified and directed |
| 3 | Dismentling existing water tank and removing from site and S&F Rotational moulded PVC water tanks of 500 Ltr capacity, cylindrical vertical with closed top hoisted and fixed in postion icluding complete all as specified and directed. |
| 4 | Dismentling existing water tank and removing from site and S&F Rotational moulded PVC water tanks of 1000 Ltr capacity, cylindrical vertical with closed top hoisted and fixed in postion icluding complete all as specified and directed. |
| 5 | S&F ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed. |
| 6 | S&F in repairs long body bib taps, cast copper alloy, fancy type with crutchor butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15mm bore. complete all as specified and directed. |
| 7 | S&F in repairs angle valve ,stop valve, cast copper alloy, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore. complete all as specified and directed. |
| 8 | S&F in repairs pillar tap, cast copper alloy, chromium plated, with capston heads screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts, screwed for 15mm bore pipe complete all as specified and directed. |
| 9 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) excluding flushing cistern and flush pipe and including P or S trap and seat cover complete all as specified and as directed. |
| 10 | S&F in repair vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, ‘P’ trap 110mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed . |
| 11 | S&F in repair PVC flushing cistern of 10 ltr capacity valveless, symphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including flush pipe of 32mm bore PVC and 15mm bore PVC connection 200mm long to pipes etc and taking down existing flushing cistern complete all as specified and as directed. |
| 12 | S&F in repairs vitreous china half stall urinals bowl type (back or corner wall type) complete including providing and fixing plugs bedding urinals against wall in cement mortar 1:2 securing urinal to plugs, with and including 60mm long brass screws complete all as specified and directed. |
| 13 | S&F in repairs brass chromium plated hand shower (health faucet) with 1.0 m long easy flex tube in chrome finish and wall hock, approved make complete all as specified and as directed. |
| 14 | S&F in repair PVC waste pipe 32mm bore, 900 mm long complete all as specified and directed. |
| 15 | S&F in repair brass chromium plated shower rose 150mm size with or without swivel joint and fixed for 15mm bore pipe complete all as specified and directed. |
| 16 | S&F in repair PTMT long body bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe and fixed complete all as specified and directed. |
| 17 | S&F in repair PTMT stop cock 15mm dia pipe with screwed for iron pipe and fixed complete all as specified and directed. |
| 18 | Taking up or down CI/PVC pipes (incl all fittings), and S&F PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc complete all as specified and directed. |
| 19 | Taking up or down CI/PVC pipes (incl all fittings), and S&F PVC (SWR) pipes 75 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc complete all as specified and directed. |
| 20 | Supply and fixing for Stack clamps out of 50 mm by 5 mm flat iron Any dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 21 | S&F Solid PVC Door Frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, complete all as specified and directed. |
| 22 | S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, complete all as specified and directed. |
| 23 | S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 24 | S&F 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 25 | S&F 125mm long Aluminium alloy handles of extruded section fabricated type anodised and fixed, complete all as specified and directed. |
| 26 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed. |
| 27 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm and n exc 4 sq, each complete all as specified and directed. |
| 28 | S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 29 | M&L Preparing surfaces of new/ old wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 30 | S&F 125mm long mild steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed . |
| 31 | S&F 150mm long Aluminium alloy handles of extruded section fabricated type anodised and fixed, complete all as specified and directed. |
| 32 | S&F 250mm long mild steel sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 33 | S&F in repair factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 34 | S&F sheet glass 5.50 mm thick of selected quality (tinted glass) fixed to door/window frame work with necessary rubber beading complete all as specified and directed. |
| 35 | M&L for Dismantling of floor, hearth or wall tiling including cement mortar bedding/backing etc, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 36 | M&L for vitrified ceramic tiles (light shades) of 9-10 mm thick polished area of each tile n.exec.36 Sqm laid as in floors setting and jointed with cement slurry over & including 10 mm thick screed bedding layers of cement sand mortar ( 1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and das directed. |
| 37 | All as per item No 36 above but on vertical surface such as dado/skirting, including Rendering/backing 10mm thick in CM 1:4 on brick wall surfaces, other than fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed. |
| 38 | M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors/wall etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over including 15 mm thick screed bead in CM 1:4, complete all as specified and directed. |
| 39 | M&L for Glazed ceramic coloured tiles of size 450mmx350x7mm thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles and including 10 mm thick backing coat in CM (1:4) including dismantling of tiles complete all as specified and directed. |
| 40 | Dismantling to Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 41 | M&L for Green Marble work 16 to 18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade. complete all as specified and directed. |
| 42 | M&L for Pre polished Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, and including 15 mm Screed bed or bedding layer of CM 1:4 complete all as specified and directed. |
| 43 | S&F in repair 25 mm dia stainless steel fancy type brackets & stainless steel fancy type finale caps etc including fixing arrangements, complete all as specified and directed. |
| 44 | S&F in repair 25 mm dia stainless steel curtain rods including fixing arrangements, complete all as specified and directed. |
| 45 | Dismantling brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles and incl M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 46 | Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. raking out joints ,hacking for key and scrubbing down with water upto 4 storeys building, complete all as specified and directed. |
| 47 | M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement upto 4 storeys building with water proofing compound complete all as specified and directed. |
| 48 | M&L for 10 mm thick cement plaster in cement mortar 1:6 on brick surfaces on fair face of brick work and finished even and smooth w/o using extra cement complete all as specified and directed. |
| 49 | M&L for 5 mm thick cement plaster in cement mortar 1:3 on concrete or brick surface and finished even and smooth w/o using extra cement as in ceiling complete all as specified and directed. |
| 50 | M&L for preparation of new plastered surfaces of wall and applying two coats exterior emulsion over a coat of exterior primer, complete all as specified and directed. |
| 51 | M&L for preparation of new surface and applying two coat of oil bound distemper on wall and other surfaces over a coat of alkali resistant priming paint and over a coat of wall care putty complete all as specified and directed. |
| 52 | M&L for preparation of new surface and applying three coat of white wash on ceiling, complete all as specified and directed. |
| 53 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level, complete all as specified and directed. |
| 54 | M&L for 75mm thick Cement concrete type D 2, 1:4:8 (using 40mm graded stone aggregate) as in sub bases, sub floors etc. complete all as specified and directed. |
| 55 | M&L for Chequered cement concrete tiles (rubber moulded with gloshy finishing) with grey cemet and pigments 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with 15mm thick bedding layer of cement sand mortar (1:6) including dismentling complete all as specified and directed. |
| 56 | M&L for sand cushioning/ filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 57 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment laid, incl dismantling of old existing/ damage paver block complete all as specified and directed. |
| 58 | M&L solid PVC wall panelling with 5mm thickness and size of each pannel 200mm wide with wood grain printed PVC Sheet complete including locking beading and PVC Sheet filet of wiudth 35mm for wall paneling inclusive of of fixing on to wall surface complete all as specified and directed. |
| 59 | Dismantling wrought iron or mild steel work of any description not otherwise provided as specified and directed. |
| 60 | S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 61 | S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats, etc. FE 410-W (Gde- E-250) quality A, complete all as specified and directed. |
| 62 | M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directe.d |
| 63 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings. complete all as specified and directed. |
| 64 | M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 65 | M&L for Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick in ridges of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 66 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 67 | M&L for Cement concrete 1:5:10 type E2 (using 40 mm graded stone aggregate) as in filling, mass/ cinder concrete, complete all as specified and directed. |
| 68 | M&L for 25 mm thick PCC 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregates) as in floor surfaces, complete all as specified and directed. |
| 69 | M&L Providing water proofing treat ment to RCC sunken slab as specified and directed as under (a) cleaning the existing RCC sunken slab and vertical wal/ RCC beam and hacking the surface. (b) 15 mm thick plastering over floor & vertical surfaces in 1:4 mixed with liquid water profing compound @ 200 per 50 kg of cement troweled to even and smooth finish without using extra cement. (c) Filling the sunken portion with water for 72 hrs and carrying out the ponding test (Any leakage / seepage noticed shall be repaired). (d) Applying two coats of elastometric acrylic water proof coating make Dr. Fixit of pidlite, Tapecrete from Cico or equivalent in sika as per sqm in each coat with roller application (Note each coat of elastomeric acrylic compound reqiuires 6-8 hrs to dry up itself second coat shall be applied on getting the first coat completely dried up. Min quantity required for coating as per manufacture instruction) complete all as specified and directed. |
| 70 | S&F in repair corner glass shelf with bracket of complete all as specified and directed. |
| 71 | Material and labour for taking out sludge from septic tank and removing the same to a distance n.exc 50 mtr from the starting point nd depositing in the pits n.exc 10 sqm on plan & n.exc 1.50 mtr depth and covered with ordinary soil and sprinkling with bleaching powder complete all as specified and directed. |
| 72 | Material and labour for cleaning & removing of sludge, soil, mud etc from sewage pipe lines 150 mm but n. exc 300 mm including manholes by rodding using MS rod tied with JETTING SUCTION MACHINE : - Mounted on a TATA 1109 OR equivelent vehicle chasis having center storage tank having two compartment of 4000 liters for suction of sewage sludge and 2000 litres for fress water required for jetting process and jute/gunny bags between manhole to manhole and flushing down with water removing the sludge to a any distance n.exc 500 mtr away from the starting point depositing in pits n.less than 30cm from existing ground level including sprinkling with bleaching powder over the area of pit & cleaned manholes complete all as specified and directed. (NOTE : - The rates quoted in the above item are inclusive of deployment of requisite manpower , cost of T&P like rods, bamboos, all safety devices etc complete.) |
| 73 | Taking down aluminium door shutters of size exc. 1.00 Sqm but n.exc. 2.00 Sqm, dismantling the door and replacing the MS anchor rods 10mm dia, both sides screwed and tightening inside frame, both side bottled & reassembled the door, fittings all items glass beading, hinges replacing rubber/aluminium beading where defective and fitted in position complete all as specified and directed. |
| 74 | Supply and fixing for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, 150mm long tower bolt 2 Nos, hinges anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 75 | M&l Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions complete all as specified and directed. |
| 76 | Supply and fixing in repairs 100mm size mortice locks of aluminium body, 4 levers suitable to aluminium door shutters complete all as specified and directed. |
| 77 | Dismantling of board of any description complete all as specified and directed. |
| 78 | M&L 12mm thk Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber/aluminium frame work complete all as specified and directed. |
| 79 | S&F 4.80 mm thick ordinay sheet glass in squares n.exc. 0.5 Sqm each pane with silicon and oil putty complete all as specified and directed. |
| 80 | Removal of excavated, demolition or dismantling of bldg finishes material for a distance exc 5 Km but n.exc 10 Km and depositing outside the defence premises, complete all as specified and directed. |
| 81 | M&L for Complete removal of existing treatment under (Weather Coat/ OBD/ Emulsion Paint/ White wash etc) by scrapping with mechanical wall sander on wall and ceiling surfaces (having mechanical vacum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7''/9'' to make the surface free from dust, loose paint, removal of nails etc and filling cracks/ holes and window/ door jams by putty & repairs in good shape by skilled labour upto 4th storey building, Complete all as specified and directed. |
| 82 | M&L for Preparation of new/old plaster surfaces to external wall/chajjas/soffits surfaces and applying two coats of super quality weather proof exterior emulsion paint over a coat of primer using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying paints should be able to spray in hard to reach areas and penetration of distemper on the surface upto 4th storey building complete all as specified and directed. |
| 83 | M&L for applying 1mm thick of wall care putty on wall/ceiling surfaces, complete all as specified and directed. |
| 84 | M&L for Preparation of new/old plaster surfaces of internal wall surfaces and applying two coats of oil bound distemper over a coat of primer using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hardto reach areas and penetration of distemper on the surface upto 4th storey building complete all as specified and directed. |
| 85 | M&L for Preparation of new/old plaster surfaces of internal ceiling surfaces and applying one coats of oil bound distemper over a coat of primer using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hardto reach areas and penetration of distemper on the surface upto 4th storey building complete all as specified and directed. |
| 86 | M&L for preparation of new/old surfaces of wall and applying two coats of plastic emulsion, over a coat of primer on wall surfaces complete all as specified and as directed. |
| 87 | M&L for Prepration of new/old surfaces of Wall/ceiling and applying two coats of white wash complete all as specified and directed. |
| 88 | M&L for Prepation of old wood surface and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint, complete all as specified and directed |
| 89 | M&L for Preparation of old steel surfaces and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 90 | Taking out of APP modified water proofing membrane and demolition of loose or undulate concrete surface complete on roof surface and surface properly cleaned by wire brush and incl debris/scraps removal out side from defence premises complete all as specified and as directed. |
| 91 | M&L for PCC 1:2:4 type B1 using 20mm graded aggregate mixed with water proofing compound as per manufacturer instructions laid 40mm avg thickness as in padding over roof slabs for providing proper slope to the concrete padding, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 92 | M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:-(a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface.(b) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm.(c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc.(d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame.Note:- This treatement shall be done by the approved authorized applicators and guarantee of treatement shall be minimum 10 years complete all as specified and directed |
| 93 | M&L for 2 coat of aluminium paint incl preparation of newly or previously untreated surfaces of any description, over 10cm width or girth, not otherwise described complete all as specified and directed. |
| 94 | S&F in repair for Aluminium composite panel (ACP) of 3/4mm thick sheet coated mirror glossy finish/ Natural wood finish of approved colour, pattern & design & as required shape like rectangular, trapezoidal or tapered curved shape (colour, shade, texture as per sample approved by GE and sample kept in GE office) with Poly Vinylidene Fluoride (PVDF) of flat panel that consist of two thin aluminium sheets (0.5mm thick) bonded to a non-aluminium core of flat sandwich panel is a structure of three layer aluminium core bonded between two sheets of required size fixed with heavy duty screws on aluminium chanel rectangular section of size 38mm X 25mm thickness 2mm for vertical & horizontal frame work or equivalant section with respect to weight, and used for external cladding or facades, partition, false ceiling, signage, etc. The joints to be filled with silicon seelant of translucent, white or black in colour with the help of portable punch machine work pneumatically after cutting the carners and edges. A protective film on ACP is removed after installation complete all as specified and directed. |
| 95 | S&F in repair 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 96 | S&F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe all as specified and directed. |
| 97 | S&F in repairs 15mm dia Brass CP sink mixer for mixing hot & cold water screwed down for iron pipe all as specified and directed. |
| 98 | S&F in repair 15mm dia PVC Connection 600mm long with nuts complete all as specified and directed. |
| 99 | S&F in repair for plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 100 | M&Lin repair for false ceilings using GI snap grid system with roll-formed out of hot dip galvanised steel caping (powder coated) main runner 38mm x 24 mm , cross Tee 29mm x 24 mm and wall angle 24mm x 24 mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board , pre painted cement fiber board size 595mm x 595mmx 4mm thick any texture at any height complete all as specified and as directed. |
| 101 | Cutting & removing tree roots from any height of walls/roof including removal of trees, roots & grass vegetables upto 50mtr away from bldg & making good damaged portion of walls in CM 1:4 or PCC 1:2:4 type B-1 surface area exc 300 Sqcm & n exc 600 Sqcm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender