Tender For special Repair To External Finishes, Chajjas, Parapet Wall, Windows, Modular Kitchen And Chimneys At Sp Marg Under Ge New Delhi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Aug 2026
10 days left
EMD
96940
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To External Finishes, Chajjas, Parapet Wall, Windows, Modular Kitchen And Chimneys At Sp Marg Under Ge New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: SPL REPAIR TO EXTERNAL FINISHES, CHAJJAS, PARAPET WALL, WINDOWS, MODULAR KITCHEN AND CHIMNEYS AT SP MARG UNDER GE NEW DELHI Contract No: GE/ND-51/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | B&R PORTION:Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition (Parapet wall) complete all as specified and directed. |
| 3 | M&L for reinforced cement concrete 1:2:4 type B1(Nominal mix) (20 mm graded stone aggregate) as in fins, slab ,facias, louvres, parapets, and railings, newels, balustrade, and the like complete all as specified and directed. |
| 4 | M&L for TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete all as specified and directed. |
| 5 | M&L for 8mm dia TMT bars, cut to length bent to shape required including cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified and directed. |
| 6 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide, fair finishes complete all as specified and directed. |
| 7 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 8 | Demolition of brickwork ,stone/boulder masonry built in cement mortar including all quoins, pillars etc by breaking up or down, separation of serviceable material from the unserviceable,incl removing the demolished material outside the MOD land complete all as specified and directed. |
| 9 | M&L for old size brick work with sub class \\"B\\" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6),(up to seven story Bldg) complete all as specified and directed. |
| 10 | M&L for old size brick work with sub class \\"B\\" bricks , straight or curved on in half brick thick wall built in cement mortar (1:4), (up to seven story bldgs.) complete all as specified and directed. |
| 11 | Demolition of stone slab and tiles of any description or thickness on steps, jambs, pillars, walls, cooking platform, floors, aprons, skirting etc laid bedded and pointed in cement mortar complete all as specified and directed. |
| 12 | M&L for 18-20mm thick granite/quartz table rubbed and polished as in cooking platforms, fixed with 20 mm thick screed bed in cement mortar 1:4 complete all as specifed and directed.Notes:- Additonal 75 mm width patti shall be measured separately. |
| 13 | M&L for drilling holes for pipes etc n exc 25mm dia in cooking platform hole in granite/quartz complete all as specified and directed. |
| 14 | M&L for drilling holes for pipes etc exc 25mm but n exc 60mm dia in brick hole complete all as specified and directed. |
| 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 16 | M&L for supper gloss/ hi gloss vitrified tiles of approved colour and design in vertical surfaces 600mmx1200 mm including provision of high lighter tiles/boarder and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 17 | M&L for light shade Vitrified tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick cement screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 18 | M&L for light shade Vitrified tile 7-8mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 19 | M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 complete all as specified and directed. |
| 20 | M&L for Glazed ceramic walls tiles coloured (300 x 600 mm/300x450), 7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer complete all as specified and directed. |
| 21 | S&F in repair 1mm thick stainless steel sink with drainage board, plugs, washers, PVC waste pipe, union, CP coupling & cantilever brackets embedded in cement and sand mortar in wall overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 22 | S&F in repairs Kitchen sink mixer 15mm dia CP brass fancy type including joints to steel pipe or unions complete all as specified and directed.Make: Jaquar Cat Part No ARI-39309, Kohler Cat Part No 20591 IN-CP, CERA Cat Part No F1015501, Hindware Cat part No-F280020 |
| 23 | S&F in repair 15mm bore Chromium plated Bib tab (spout) while with Wall Flangecomplete all as specified and directed.Make: Jaquar Cat Part No OPP-15037PM, Hindware Cat Part No F340004CP, KOHLER Cat Part No K-16093IN-4-CP, CERA Cat Part No F1013151 |
| 24 | S&F in repair Angular Stop Cock/angle valve 15mm bore chromium plated with Wall Flange complete all as specified and directed.Make : Jaquar Cat Part No OPP-CHR-15053PM, Hindware Cat Part No F570043CP, KOHLER Cat Part No 11568IN-7BCP, CERA CAT Part NO F1015201 |
| 25 | S&F in repair bib tap standard of CP any colour high pressure screwed for iron pipe and fixed to 15mm bore complete all as specified and directed. |
| 26 | S&F in repairs Good quality Connection pipe (PVC) 15 mm dia and 450/600mm long complete all as specified and directed. |
| 27 | S&F in repair stainless steel plate rack of size 60x60x25cm made with 1.0mm thick sheet complete all as specified and directed. |
| 28 | Taking down (Door/window) chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 29 | Taking down (Door/window) chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 30 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and removing from site complete all as specified and directed. |
| 31 | Taking down and refixing of shutters of size exc 1.00 sqm but n exc 2 sqm in same opening including all necessary adjustments to fit the shutter with frame like easing of shutter for easy closing /opening, tightening of hinges or changing the position of hinges adjustments of tower bolts, Sliding bolts etc complete all as specified and directed. |
| 32 | S&F 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 33 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer - in - charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 34 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer -in - charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 35 | M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter with leaping and edge bending in factory of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineering- Charge.Note: Hardware fittings shall be paid separately under relevant item |
| 36 | M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter with leaping and edge bending in factory of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineering- Charge. Note: Hardware fittings shall be paid separately under relevant item |
| 37 | M&L for providing 35mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER with leaping and edge bending in factory consisting of Density 650 Kg /cum Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). “the door should holding capacity wpc to be laminated wpth PVC foil of min 14 micron thick of approved design pasted with hot melt adhsive on both faces of shutter. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardware should be fixed with 19*6mm size steel screws etc. Complete as per manufacturer's specification & drawings complete all as specified and directed.Note: Fixture/fittings shall be measured & paid under relevant item |
| 38 | Dismantling wrought iron or mild steel/ iron work of any description (steel window & Grill) complete all as specified and directed. |
| 39 | M&L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 40 | S&F factory made uPVC white colour fixed glazed window/ventilator made of ( small series) frame 47 x 50mm mullion 47 x 68mm both having wall thickness of 1.9 + 0.20mm and single glazing bead of appropriate dimension ( Area upto 0.75 sqmtr) comprising of uPVC multichambered frame and mullion (wherever required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile shall be acceptable variation in profile shall be acceptable variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 41 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body it single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: Glass and wire mesh shall be paid separatelyNote: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 42 | S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty / rubber beading as in uPVC door/window shutter, in square n exc 0.5 Sqm in each pane complete all as specified and directed. |
| 43 | S&F stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or galvanised wire staples complete all as specified and directed. |
| 44 | M&L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed. |
| 45 | M&L for preparation of old Steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint complete all as specified and directed. |
| 46 | S&F 100mm long (size) butt hinges, heavy weight stainless steel AISI 304 grade with brass/bronze hinge pin complete all as specified and directed. |
| 47 | S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section, etc. complete all as specified and directed. |
| 48 | S&F 300mm long,stainless steel AISI 304 grade , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, and fixing bolts and sliding bolts complete all as specified and directed. |
| 49 | S&F 150mm long stainless steel barrel tower bolt of extruded section, complete all as specified and directed. |
| 50 | S&F, 150mm size stainless steel AISI 304 grade fancy type handle complete all as specified and directed. |
| 51 | S&F stainless steel AISI 304 grade floor door stopper with twin rubber shoes double door stopper 75 mm long complete all as specified and directed. |
| 52 | S&F 100mm long extruded fancy D' type type SS handle for kitchen cup boards shutters, cabinets, crockery shelf drawers fixed with nuts , screw and washer complete all as specified and directed. |
| 53 | S&F 150 mm ordinary helical door springs incl roller & roller plate of mild steel complete all as specified and directed. |
| 54 | Taking up or down steel tubing and connections of 15mm bore complete all as specified and directed. |
| 55 | Supplying and laying of CPVC 20mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings with fitting as required complete all as specified and directed. |
| 56 | S&F in repair 75mm dia (bore of pipe) cast iron (sand cast) soil, waste and vent hubless pipe as per IS-15905:2011 in any length with or without ears with jointed with stainless steel shielded SS-304 coupling double screw system with EPDM rubber, fixed to floors or trenches, complete all as specified and directed. |
| 57 | S&F in repair 75mm dia (bore of pipe) cast iron (sand cast) soil, waste and vent hubless pipe as per IS-15905:2011 in any length with or without ears with jointed with stainless steel shielded SS-304 coupling double screw system with EPDM rubber, fixed to wall, complete all as specified and directed. |
| 58 | S&F in repair 75mm dia (bore of pipe) cast iron hubless Tee as per IS-15905:2011 (any radius), diminishing piece or tapers (larger bore measured) jointed with stainless steel shielded SS- 304 coupling double screw system with EPDM rubber , complete all as specified and directed. |
| 59 | S&F inrepair cast iron floor trap with Cockroach Proofing CP grating with or without hole including jointing to waste pipes , fixed in cement concrete type B-1 (1:2:4), dia of outlet 75 mm, complete all as specified and directed. |
| 60 | S&F in repair Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 75mm dia bore of pipes complete all as specified and directed. |
| 61 | Dismantling boarding, any description, fixed in any position with nails/screws complete all as specified and directed. |
| 62 | M&L for the following:Below Counter Carcasses : Providing and fixing of machine crafted box type cabinet bottom unit 560mm depth having : Top panel - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of any colour. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Bottom panel - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of any colour. Lipping - 2 mm edge banding of Rehau matching the laminate shade.Back panel - 9mm hdhmr board - laminated on both sides in 0 .8 mm laminate of any colour. Visible side to be laminated with 1mm thick laminate of approved color. Vertical panels - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of any colour. Visible side to be laminated with 1mm thick laminate of approved color. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Horizontal panels - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of any colour. Visible side to be laminated with 1mm thick. laminate of approved color. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Shutter - 18mm hdhmr board - laminated on inside with 0.8mm thick laminate of any color and on external side in 1 mm thick HI gloss Acrylic laminate of approved colour of Rehau make, Lipping - 2 mm edge banding of Rehau matching the laminate shades complete all as specified and directed. Note: The subject item is inclusive the all as follows :-(i) Soft close hinges of ( Make : Hettich/ Hafele/ Samsung Irex)(ii) All base units to have adjustable pvc legs with clip on 100mm high PVC skirting in grey color. (iii) All shutters to have Gola profiles for handleless shutters. (iv) Basic price of the 1mm Acryic laminate not to exceed Rs. 110/ sq.ft.NOTE : Measurement for payment shall be based on net front fascia area only in sqm. |
| 63 | M&L for the following:Above Counter Carcasses : Providing and fixing of machine crafted box type cabinet and CNC cut as design approved by GE bottom unit 325mm depth having : Top panel - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of any colour. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Bottom panel - 18mm hdhmr board - laminated on both sides in .8 mm laminate of any colour. Lipping - 2 mm edge banding of Rehau matching the laminate shade.Back panel - 9mm hdhmr board - laminated on both sides in 0 .8 mm laminate of any colour. Visible side to be laminated with 1mm tk. laminate of approved color. Vertical panels - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of any colour. Visible side to be laminated with 1mm tk. laminate of approved color. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Horizontal panels - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of any colour. Visible side to be laminated with 1mm tk. laminate of approved color. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Shutter - 18mm hdhmr board - laminated on inside with 0.8mm tk. laminate of any color and on external side in 1 mm HI gloss Acrylic laminate of aapproved colour of Rehau make, Lipping - 2 mm edge banding of Rehau matching the laminate shades complete all as specified and directed.Note: The subject item is inclusive the all as follows :- (i) Soft close hinges of ( Make : Hettich,/ Hafele,/Samsung Irex)(ii) All base units to have adjustable pvc legs with clip on 100mm high PVC skirting in grey color. (iii) All shutters to have Gola profiles for handleless shutters. (iv) Basic price of the 1mm Acryic laminate not to exceed Rs. 110/ sq.ft. NOTE : Measurement for payment shall be based on net front fascia area only in sqm. |
| 64 | M&L for SS 470mm long Pot and pan Innotech drawers complete all as specified and direted. Make : Hettich, Hafele, Samsung Irex |
| 65 | M&L for 600mm PVC cutlery tray and pantry of aapx size 2mx0.5m along with 04 collapslble mech arrangement ss 304 tray of complete all as specified and direted. Make : Hettich, Hafele, Samsung Irex |
| 66 | M&L for SS 600mm dish rack of complete all as specified and direted.Make : Hettich, Hafele, Samsung Irex |
| 67 | M&L for SS Detergent rack complete all as specified and direted.Make : Hettich, Hafele, Samsung Irex |
| 68 | M&L for SS 200 mm Bottle pullout complete all as specified and direted.Make : Hettich, Hafele, Samsung Irex |
| 69 | S&F MS roller with \\"C\\" shape staple, chromium plated for 5.5mm thick sheet glass complete all as specified and directed. |
| 70 | S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in complete all as specified and directed. |
| 71 | S&F 15mm mild steel, chromium plated rod with fixing brackets, fixed in cupboards for hanging cloth of adequate strength complete all as specified and directed. |
| 72 | S&F stainless steel AISI 304 grade handle of size 100 mm long, etc complete all as specified and directed. |
| 73 | S&F Magnetic catch for wooden cupboard with complete closer mechanism claps and clips fix with stainless steel screw complete all as specified and directed. |
| 74 | S&F Continuous (piano) hinges width of flap 30 mm, mild steel, bright finish or electrogalvanised fixed to steel chowkhat with welding or with screws complete all as specified and directed. |
| 75 | S&F in repair stainless steel peg set of 6 peg, 45 centimeter long, complete all as specified and directed. |
| 76 | S&F powder coated aluminium Door seal not less than 1.00 mtr long with fine fibres suitable for fixing in doors complete all as specified and directed. |
| 77 | Taking down cement or cement lime plaster any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed including removal of debris out side MoD land complete all as specified and directed.Note: The work shall be carried out upto sixth storey height of buildings. |
| 78 | M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth (without using extra cement) complete all as specified and directed. |
| 79 | M&L for rendering 15 mm thick on fair faces of brick/concrete surfaces in CM (1:4) finished even and fair without using extra cement complete all as specified and directed. Note : The work shall be carried out upto sixth storey height of buildings including all safety factor. |
| 80 | M&L for rendering 10 mm thick on fair faces of brick/concrete surfaces in in cement plaster 1:6 and finished even and smooth (without using extra cement) complete all as specified and directed. |
| 81 | M&L for rendering 10 mm thick on fair faces of brick/concrete surfaces as in ceiling/soffits of chajja in CM (1:4) finished even and smooth (without using extra cement) complete all as specified and directed.Note : The work shall be carried out upto sixth storey height of buildings including all safety factor. |
| 82 | M&L for preparation of the newly plastered surfaces of walls applying a coat of wall care putty over plastered surface to prepare the surface even and smooth to recieve one coat of primer and apply two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using paint roller technology complete all as specified and directed. |
| 83 | M&L for preparation of the newly plastered surfaces of ceiling applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to recieve one coat of primer and apply two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using paint roller technology complete all as specified and directed. |
| 84 | M&L for preparation of old decorated surface (plastered or unplastered) of ceiling by complete removal of existing treatment by mechanical grinder and applying a coat of wall care putty over plastered surface to prepare the surface even and smooth to recieve one coat of primer and apply two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using paint roller technology complete all as specified and directed. |
| 85 | M&L for preparation of the newly plastered surfaces of wall/ roof projections including chajja, facia, cornices etc applying a coat of wall care putty over plastered surface to prepare the surface even and smooth and apply two coats of Acrylic smooth exterior paint of required shade @ 1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm as per manufacturer's specification complete all as specified and directed. |
| 86 | M&L for complete removal of existing treatment on wall/ roof projections including chajja, facia, cornices etc by scrapping and applying a coat of wall care putty including sanding the surface to prepare the surface even & smooth and apply two coats of Acrylic smooth exterior paint of required shade @ 1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm as per manufacturer's specification Complete all as specified and directed.Note for item No 81.00 to 85.00 :- (a) The work shall be carried out at any height upto sixth storey including all safety factor and necessary scaffolding. (b) All work shall be done mechanically through authorised applicator only. (c) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm (d) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer. (e) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators (f) cost of above mentioned shall also included in quoted rates.Note: Make and Brand for Periodical Services and painting items are as under:-(i) Make for wall putty for first coat: Birla wall seal putty/ Asian smart care putty/ JK wall maxx putty(ii) Make for wall putty second coat: Asian paint trucare acrylic wall putty/ Berger happy wall acrylic putty/ Nerolac premium acrylic wall putty(iii) Make for Exterior acrylic emulsion: Asian apex ultima/ Berger weather coat long life/ Nerolac excel total/ Birla Opus Primer exterior E70(iv) Make for OBD: Asian tractor UNO/ Berger bison acrylic distemper/ Nerolac beauty acrylic distemper(v) Make for synthetic enamel paint: Asian paint apcolite premium gloss enamel/ Berger luxol high gloss enamel/ Nerolac synthetic hi gloss enamel |
| 87 | M&L for uprooting grass/ plants (girth n.exc 15 cm of trunk to any of plants) grown along the pipes or walls, chajjas, parapets and roof or any othder location on the building upto sixth storey height including making good the surface as per existing surface and pouring acid not less than 100 ml for each plant in the roof to avoid further growth with necessary scaffolding/form work required for completion of work upto sixth storey height including all safety factor complete all as specified and directed. |
| 88 | M&L for preparation of old painted stone wall surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.Note: The work shall be carried out upto sixth storey height of buildings including all safety factor. |
| 89 | M&L for 75mm thick precast cement concrete ,type B-0, 1:2:4 (12.50 mm graded stone aggregate) as in louvres & jallies ( measured solid), set in CM 1:4 complete all as specified and directed. |
| 90 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above ground levels, incl removing the demolished material outside the MOD land complete all as specified and directed. |
| 91 | M&L for 75mm thick PCC 1:3:6, type C-2 (40 mm agg) as in plinth protection finished even & smooth without using extra cement complete all as specified and directed. |
| 92 | Dismantling of brick tiles in roof single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near outlet of RWP and OHT staging area or specifically ordered by Engineer -in -Charge in writing, complete all as specified and directed. |
| 93 | Demolition of mud in roof, any thickness, including plastering and leaping up to seven story bldgs. incl necessary scaffolding arrangement complete all as specified and directed (whether full thickness removed or only a part there of) and removing from cantonment area complete all as specified and directed by Engr in charge. |
| 94 | M&L for brushing neat cement slurry with 3 kg of cement per square metre complete all as specified and directed. |
| 95 | M&L for 40mm thick PCC (1:2:4) type B-1 (20mm graded aggregate) as in slope correction layer over rcc slab finished without using extra cement complete all as specified and directed. |
| 96 | M&L for 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface complete all as specified and directed. Note: WPC shall be measured and paid separately |
| 97 | Supply only water proofing compound as per manufacturer instruction complete all as specified and directed. |
| 98 | M&L for APP based polymeric membrane plain finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints complete all as specified and directed.Make: Ms STP Pvt Ltd/ Ms Asian Paints Ltd/ Ms Berger Paints/ Ms Sika India Pvt Ltd/ Ms IWL India Ltd |
| 99 | M&L for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner complete all as specified and directed. |
| 100 | M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edge including necessary form work complete all as specified and directed. |
| 101 | M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement and applying approved anti-corrosive coating to reinforcement, applying polymer bonding coat on prepared concrete surface and providing 25 mm thick PMM (Polymer modified cementitious mortar) in layers as per manufacturer’s specifications, finished true to line, level and profile, including scaffolding/staging and disposal of unserviceable material & debris outside the premises and complete all as specified and directed by the Engineer-in-Charge. Note :- (a) The work shall be carried out at any height upto sixth storey including all safety factor and necessary scaffolding. (b) Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairly rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. |
| 102 | S&F welded steel wire fabric, n.exc 4 Kg weight per sqm, cut to length bent to shape required and fixing with and including annealed mild steel wire not less than (0.90 mm dia or fixing with galvanised steel staples or welding supplied and fixed complete to wood or steel members complete all as specified and directed. |
| 103 | Dismantling A.C/Fibre sheet corrugated or semi corrugated sheet in roof coverings/cladding complete all as specified and directed. |
| 104 | S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof /wall complete all as specified and directed. |
| 105 | E&M PORTION:S&F instant hot water Geyser of minimum 5 ltrs capacity, vertical type with suitable size of fastner and incl provision and connecting of SS braided pipe with adopter for inlet and outlet water connection, copper element should be corrossion resistant, antiscaling magnesium anode, and inner tank material of superior glass lined tank having heating element of minimum 2.5 kW complete all as specified and directed. Note: It should have minimum two year warranty on product & minimum three year warranty on heating element. Make: Crompton CAT Part No Rapid Jet 5-L, Bajaj CAT Part No AQUAQUICK, Orient Cat Part No RAPIDUS |
| 106 | S&F wall mounted electric chimney of minimum width 60cm, having suction power not less than 1350cum/Hr, with stainless steel outer layer, with 3 speed motor with decorative smart cooker hood SS/glass, energy efficient LED light with digital display including ducting,having auto clean function,noise level not more than 60dB, Control Panel- Touch & motion sensor control, including ducting as per site requirement complete all as specified and directed by Engineer in Charge. Note- The rate quoted by the contractor will include ducting length upto 8 meters from the chimney to the exhaust hole Make:- ELICA -CURVE FL 600 HAC LTW MS NERO, HINDWARE - NV10PLUS60, FABER- HOOD PRIMUS PLUS 1WH. |
| 107 | M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x 2.5 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 2.5 sqmm PVC insulated unsheathed copper conductor multi stranded FRLSH type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.Make- Polycab, KEI, RR KABEL |
| 108 | S&F modular socket out let shuttered type flush mounting type, 230/250 volts grade 2/3 Pin 16 Amp combined 2 module type. complete all as specified and directed.Make : Legrand , Havells, SchneiderNote:- Cost of sunken box (3 Module), modular cover plate front and back (3 Module) included in the rate quoted by contractor. |
| 109 | S&F modular switch 230/250 volts grade One way 16 Amp one module rating complete all as specified and directed.Make:- Legrand , Havells, Schneider |
| 110 | S&F Modular MCB SP 16-20 Amps 240V 3 KA, C Curve, fitted in main switch board, including 2.5 sqmm wire connecting power socket & modular MCB complete all as specified and directed by Engr-In-Charge. Make: Havells ,LK (L&T), Schneider, Legrand. Note: (a) Srl Item No 03.00, 11.00, 15.00, 19.00, 21.00 to 23.00, 32.00 to 36.00, 40.00, 61.00 to 69.00, 78.00 to 80.00, 84.00, 85.00, 97.00, 98.00, 100.00, 104.00 to 107.00 & 109.00 of BOQ and all bathroom fittings and sanitary items are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender