Tender For Provision Of Veh Parking Shed Near Office Of Age (I) Nabagram At Nms Under Age (I) Nabagram
Tender Value
5.72 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
5 days left
EMD
11454
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Murshidabad → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Veh Parking Shed Near Office Of Age (I) Nabagram At Nms Under Age (I) Nabagram
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and getting out in hard dense soil. |
| 2 | Material & Labour for PCC (1:4:8) type D-2, using 40mm graded stone aggregate in foundation, filling and mass concrete complete all as specified. |
| 3 | Material & Labour RCC M-25 (Design mix) using 20mm graded stone agg as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete. |
| 4 | Material & Labour RCC M-25 (Design mix) using 20mm graded stone agg as in columns, pillars, piers, posts and struts etc |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
| 6 | Removing Excavated soils exceeding 50metres but not exceeding 250 metres and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed. |
| 7 | Formwork to side of concrete foundations ,footings,bases of columns raft and raft beams and similar type of work |
| 8 | Formwork to sides of column and similar type of work rough finished rectangular in shape |
| 9 | Material & Labour for Cantilever Tensile structure with sione 850 GSM Opaque Black Out Fabric shed with M.s Tubular Framework Red Oxide Coating (Paint: Alkyd Milky White Paint on Structure) fixing of membrane plottting of structure & HF welding of membrane heat sealing of membrane waterproofing of structure fixing of ms fitting metallic ribs and stainless steel fitting. Note: MS col pipe OD 139mm and 3.6mm th, outer & banding frame pipe arch pipe truss section of 2.5mm thick and OD 89mm pipe, base plate 16mm tks and size 450x300mm, MS purling pipe 2mm tk,aluminium flat bar 1\\" wide,2mm tk, roof sheet material 850g/sq fabric ms klite 2\\"x4.5\\", ms rib etc completer all as drg and specified and as directed by E ngr-in-charge. |
| 10 | TMT mild steel bars10mm dia and above cut to length bend to shape required , including cranking bending spirally for hooping for coumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. |
| 11 | TMT mild steel bars 8 mm dia , cut to length bend to shape required , including cranking bending spirally for hooping for coumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clipsas in stirrups |
| 12 | S&F Mild steel screw bolts (machine made) any size of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and as directed. |
| 13 | Material & Labour for Framed work as in doors, ladder, or gates Fe 410-w A quality of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 14 | Material & Labour prepration of new steel surface and applying two coats Epoxy Paint / Polyurethane Paint over a coat of primer complete all as specified and as directed. |
| 15 | Material & Labour Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges 1.25 mm thick 250mm dia sheet |
| 16 | Surface excavtion n exc 30cm deep and avg 15cm deep and getting out soft/ loose soil |
| 17 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 18 | Material & Labour for hard core broken stone of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, water and rammed to a true surface complete all as specified and directed. |
| 19 | Material & Labourfor 100 mm thick PCC (1:4:8) type D-2 using 40 mm stone aggregate as in Sub Base |
| 20 | Material & Labour joint free digital ceramic coloured heavy duty parking tiles (GRC) of size 10 to 12 mm thick (square/rectangular) area of each tiles exceeding 0.08 Sqm but not exceeding 0.16 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.Make : Kajaria/ Somany/ Jhonson as approved by GE. |
| 21 | S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C1 (20mm stone agg) all as directed by Engr-in-Charge ser in CM 1:6 |
| 22 | Material & Labour for two coat of synthetic enamel paint on new concrete surface including preparation of surface Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender