Tender For Repair To Sewage Lines, Septic Tank, Boundary Wall, Drain, Hard Standing,Path, Fencing , Gates, Culvert And Connected Works Of Certain Buildings At Various Units (Md/Otm Accn) In Zone G Area Under Age B/R (N) No Ii Of Ge (N) Secunderabad.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
12 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Sewage Lines, Septic Tank, Boundary Wall, Drain, Hard Standing,Path, Fencing , Gates, Culvert And Connected Works Of Certain Buildings At Various Units (Md/Otm Accn) In Zone G Area Under Age B/R (N) No Ii Of Ge (N) Secunderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning/clearing & Maintanance of sewage lines including CI/PVC stacks, incl under ground sewage lines any depth by removing any type of blockage from sewage drain upto and including 300mm bore/ dia by rodding or any other means from manholes to manholes including plugging of manholes temporarily as and when required and flushing with water after cleaning including intermediate manholes. Sludge/sludge water in form of semi solid/loose state will be disposed off either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) including taking off manhole covers and refixing the same after cleaning complete all as directed by Eng-in-Charge. The operation shall be executed/carried out with any kind of sewage cleaning device such as sewage cleaning Mechanical Pump / Vehical and cost of same shall be deemed to be included in the rate quoted by the contractor. |
| 2 | Cleaning of blocked WC/gully trap/ Floor trap, upto and including first manhole by manual labour as well flushing with clean water making the WC seat , gully trap, floor trap operational complete all as specified and directed by Eng-in-Charge. |
| 3 | Taking out semi solid, liquid suspension sludge and foreign material from man hole/ septic tanks/ soakage well of any description and any depth including pumping of water and removing and refixing of acessories and appliances required for safe disposal of sludge and foreign materials either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) in ground complete all as directed by Eng-in- charge. (Note: The location at out side MOD land for disposal of foreign material obtained above shall be located by the contractor himself). |
| 4 | Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in soft/loose soil complete all as specified and as directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed. |
| 6 | Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed. |
| 7 | M&L PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 300mm bore of pipe including demolition of existing PCC complete all as specified and as directed. |
| 8 | M&L PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore of pipe including demolition of existing PCC complete all as specified and as directed. |
| 9 | M&L PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore of pipe including demolition of existing PCC complete all as specified and as directed. |
| 10 | M&L 300 mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition and breaking up 300mm bore dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed. |
| 11 | M&L 200 mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition and breaking up 200mm bore dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed. |
| 12 | M&L 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition and breaking up 150mm bore dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed. |
| 13 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed. |
| 14 | M&L Brickwork with using fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) including demolition of brick work/ precast concrete block walling, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 15 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 16 | M&L PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in coping, benching, bed blocks and the like including using necessary form work complete all as specified and as directed. |
| 17 | M&L PCC (1:5:10) type E2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 18 | M&L Rendering 15 mm thick in two coats, 10 mm thick in CM (1:6) and 5 mm thick in CM (1:4) mixed with integral water proofing compound as per manufacturers instructions, on fair faces of brick work or concrete surfaces or PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately. |
| 19 | Supply only integral water proofing compound. |
| 20 | S&F in repair for factory made 50 mm thick, 900mmX650mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed. |
| 21 | S&F in repair for factory made 50 mm thick, 600mmX450mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed. |
| 22 | S&F in repair for factory made 50 mm thick, 450mmX450mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed. |
| 23 | S&F in repair for factory made 50 mm thick, 600mmX600mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed. |
| 24 | S&F in repairs for vitreous china, squatting pan, 'Orissa' pattern, size 580 mm x 440 mm, white, with PVC 'P' of 'S' trap, front or back inlet and foot rests any pattern, including provision of lime concrete bedding and making good to floor in PCC 1:2:4 type B1 using 20mm graded stone aggregate and all necessary fittings, connections to trap, inlet, outlet, anti-syphonage pipes, etc. complete all as specified and as directed. |
| 25 | S&F in repair vitreous china European type wash down water closet pan, (Pedestal pattern), white including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, 'P' or 'S' trap, PVC jet nozzle, necessary inlet and outlet connections making good complete all as specified and as directed. |
| 26 | S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed. |
| 27 | S&F in repair for vitreous chinaware wash hand basin, white, flat back, size 580x450 mm including CP waste coupling, cp pillar tap quater turn ,chain and plug, waste fittings, union and PVC waste pipe 32 mm dia of required length, pair of MS angle iron brackets or MS fastener bolts, 15mm dia PVC connection 450mm long including PTMT check nuts etc and all necessary inlet outlet connections complete all as specified and as directed. |
| 28 | S&F Vitreous China half stall type, white bowl urinal flat back, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, including 5 ltrs capacity PVC automatic flushing cistern with brackets, 32mm dia PVC flush pipe and discharge pipe, grating and union for discharge pipe complete all as specified and as directed. |
| 29 | S&F in repair looking mirror 600mm x 450mm x 6 mm thick bevelled edge mirror of selected quality glass, itched designed corners, fixed to wall with 12mm dia spacers at each corner complete all as specified and as directed. |
| 30 | S&F in repairs plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for pedestal pattern WC/ semi pedestal and pattern WC (anglo India type) complete all as specified and as directed. |
| 31 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,n etc., complete all as specified and as directed. |
| 32 | S&F PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors/fixed to walls complete all as specified and as directed. |
| 33 | S&F PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors/fixed to walls complete all as specified and as directed. |
| 34 | S&F 40mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches complete all as specified and as directed. |
| 35 | S&F in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed. |
| 36 | S&F in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed. |
| 37 | S&F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe complete all as specified and as directed. |
| 38 | S&F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 75mm bore pipe complete all as specified and as directed. |
| 39 | S&F in repair for PVC (SWR) junction single, (single T) equal or unequal for 110 mm bore pipes complete all as specified and as directed. |
| 40 | S&F in repair for PVC (SWR) junction single, (single T) equal or unequal for 75mm bore pipes with access door complete all as specified and as directed. |
| 41 | S&F PVC (SWR) floor trap, 75mm dia of outlet,plain with grating including joining with solvent cement complete all as specified and as directed. |
| 42 | S&F in repair 16 mm bore uPVC pipes SDR 11 & Plain uPVC SDR 11 fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and as directed. |
| 43 | S&F in repair 20 mm bore tubes uPVC pipes SDR 11 & Plain uPVC SDR 11 fittings all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and as directed. |
| 44 | S&F in repair 25 mm bore tubes uPVC pipes SDR 11 & Plain uPVC SDR 11 short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and as directed. |
| 45 | M&L Removing of tree grown in brick masonry, behind CI pipe, parapets, shafts etc including removing root from wall by chiseling carefully without damaging the structure and making good by brick work in CM 1: 6 including toothing, bonding and plastering in CM 1:4,by applying chemical treatment with GLYPHOSATE 41% complete as specified and directed by Engineer-in- charge. |
| 46 | S&F PVC lid of any pattern for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking both complete all as specified and directed by Engr-in-Charge. Make. Sintex/Star |
| 47 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed cement slurry and ponted in white or colour cement to match the tiles including 15 mm thick screed bed or bedding layer in CM (1:4) and including demolition of existing tiles complete all as specified . |
| 48 | M&L Designer coloured glossy chequered cement concrete tiles of size 30cmx30cmx25mm thick in floor, set, jointed with Grey Cemnet and no pigment and pointed in neat cement slurry over and including 15 mm thick screed bed in CM (1:6) including dismantling of existing tiles of any description or thickness laid bedded and pointed in cement mortar complete all as specified and as directed. |
| 49 | M&L Machine pressed precast cement concrete interlocking tiles, paver block, any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed. Note: (i) Manufacturers test certificate shall be submitted alongwith sample. |
| 50 | M&L PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in sub base including demolition of existing concrete complete all as specified and as directed. |
| 51 | Removing Carefully existing interlocking tiles, paver block, removing rubbish off the premises and laying the same tiles/ blocks, 60mm thick, in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. |
| 52 | S&F Rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) complete including dismantling existing water tank all as specified and directed. Make: Cat No. HSWS-0100-01-Pure of M/s Sintex |
| 53 | M& L Framed work such as grills, gratings, Gates etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and ornamental and intricate design conforming to Fe.290.Gde-E-165,complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender