Tender For Provision Of 05 Fire Hydrants At Various Locations At Bathinda Mil Station Under Ge (Utility) Bathinda
Tender Value
25.15 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
20 days left
EMD
50300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of 05 Fire Hydrants At Various Locations At Bathinda Mil Station Under Ge (Utility) Bathinda
BOQ
| Sl. No. | Item Description |
| 1 | Supply & fixing of single headed ISI marked oblique pattern hydrant landing gun metal valve with 80mm dia flanged inlet and 63 mm dia instantaneous type female outlet with gun metal cap and GI chain twist release type plug and accessories as per IS 13: 5290-1983 (Type-'A') complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Supply, fixing and laying MS ERW pipe 150mm with both end flanged and thickness not less than 4.5mm complete all as specified and as directed by Engineer-in-Charge. Note: - During execution of this item any drain wall, road etc, required for repair the same shall be repair by contractor without any extra cost. No misunderstanding shall be entertained on later stage. |
| 3 | Supply and fix MS ERW pipe 100mm with both end flanged and thickness not less than 4.5mm complete all as specified and as directed by Engineer-in-Charge. Note: - During execution of this item any drain wall, road etc, required for repair the same shall be repair by contractor without any extra cost. No misunderstanding shall be entertained on later stage. |
| 4 | Supply & fixing non-perciolating flexible hose (RRL type 'A') ISI marked 63 mm dia and 15.00 Metre long with instantaneous type gunmetal/SS IS marked male & female coupling (IS;903) bound and revelled to hose pipe with copper rivets and 1.5 mm copper wire complete all as per manufacturer's instructions and as directed by Engineer-in-Charge. |
| 5 | M&L Pressure gauge 4'' dial 0-14 Kg rating complete with fixing accessories as directed by Engineer-in-Charge. |
| 6 | Supply and fixing in Cast Iron butterfly valves of size 100 mm dia ISI marked PN 1.6 complete all as directed. |
| 7 | M&L Outdoor type lockable hose cabinet suitable to house 2 Nos. of 15 m RRL hose and 2 Nos. of branch nozzles, of size 800 X 600 X 250 mm, made of 18 gauge MS sheet with double door with 4 mm thick glass and door frame made of 16 gauge MS sheet painted two coats of fire red outside and brilliant white inside over a coat of primer, having \\"HOSE CABINET NO.\\" painted on the inner face of the glass in 50 mm size block letter, including fixing on angle iron frame of size 40 mm X 6 mm & the cost of break glass box containing the key of the cabinet complete all as specified and directed by the engineer-in-charge. |
| 8 | S & F branch pipe, conforming to IS 903: 1993, having 63 mm instantaneous gunmetal/SS inlet, made threaded outlet 15 mm bore nozzle, suitable for inter connection to hose pipe coupling complete all as specified and directed by the engineer-in-charge. |
| 9 | Material and Labour for Preparation of old steel and iron surface of any description and applying one coat of synthetic red enamel paint, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed by Engineer-in-charge. |
| 10 | Excavation in trenches n exc 1.5 m wide and not n exc 1.5 m depth and getting out in hard dense soil including grading and ramming bottom surface all as specified and directed by Engr-in-Charge for laying pipes and fittings. |
| 11 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed by Engineer-in-charge. |
| 12 | Removal of surplus excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender