Tender For Special Repair To Offrs Md Accn Bldg No P-193 (02 X Qtrs) At Perry Estate At Clement Town.
Tender Value
47.33 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
3 days left
EMD
94700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Offrs Md Accn Bldg No P-193 (02 X Qtrs) At Perry Estate At Clement Town.
BOQ
| Sl. No. | Item Description |
| 1 | M&L old size Brick work with sub class B bricks (old size) straight or curved on plan exc 6m mean radius built in CM 1:6 incl Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 2 | M&L for treatment of soil using emuision for post construction Anti termite treatment along internal/external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc. in plinth protection or apron complete all as specified and directed. |
| 3 | Taking down cement plaster any description on brick or stone walls or RCC roofs/ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 4 | M&L for rendering 15 mm thick on fair face of brick works in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed. |
| 5 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of wall and finished even and fair with out using extra cement complete all as specified and directed. |
| 6 | M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed. |
| 7 | M&L for applying 2 mm thick wall care Putty on walls and making good minor cracks, filling of holes etc. and making surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 8 | M&L for applying 2 mm thick wall care Putty on ceilings and making good minor cracks, filling of holes etc. and making surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 9 | M&L for preparation of new plastered surfaces of walls or concrete and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 10 | M&L for preparing new plastered surfaces of walls, Facias, cornices etc and apply two coats of weather proof exterior emultion paint over a coat of primer on ht. upto ht. of 10 mtr Complete all as specified and directed. |
| 11 | M&L for preparation of new plastered surfaces of ceiling or concrete and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 12 | M&L for removal of existing treatment over wall and applying 2 mm thick wall care Putty on walls and applying two coats of oil bound distemper on wall over a coat of primer on old surfaces complete all as specified and directed. |
| 13 | M&L for complete removal of existing treatment over wall upto ht. of 10 mtr and applying two coats of weather proof exterior emultion paint over a coat of primer on wallls, concrete surfaces etc. on ht. upto 10 mtr Complete all as specified and directed. |
| 14 | M&L for removal of existing treatment over ceilings and applying 2 mm thick wall care Putty on ceilings and applying two coats of oil bound distemper on wall over a coat of primer on old ceiling surfaces complete all as specified and directed. |
| 15 | M&L for preparation of old distempered/treated surfaces of walls and applying two coats of oil bound distemper on walls after rubbing walls with sand paper complete all as specified and directed. |
| 16 | M&L for preparation of old plastered surfaces of ceilings and applying two coats of oil bound distemper after rubbing ceiling with sand paper complete all as specified and directed. |
| 17 | M&L preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge |
| 18 | M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 19 | M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 20 | Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed |
| 21 | Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed |
| 22 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. complete all as specified and directed.(M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed. |
| 24 | S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 25 | S&F 35 mm thick FACTORY MADE Wire Mesh Solid WPC Pre-laminated both side DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings. complete all as specified and directed |
| 26 | Dismantling Boarding any description fixed in any position with nails complete all as specified and directed. |
| 27 | S & F 18/19 mm thick one side prelaminated coloured WPC board for cup board shutter & frame & fixed at site with SS screws and solvent cement/ adhesive to make kitchen cabinet shutters/ cupboards complete as per manufacturer’s instructions complete all as specified and directed. Note- Colour of WPC board wiil be as approved by Engr-In-Charge/GE. complete all as specified and directed. |
| 28 | S & F 18/19 mm thick both side prelaminated coloured WPC board for cup board shutter & frame & fixed at site with SS screws and solvent cement/ adhesive to make kitchen cabinet shutters/ cupboards complete as per manufacturer’s instructions complete all as specified and directed. Note- Colour of WPC board wiil be as approved by Engr-In-Charge/GE. complete all as specified and directed. |
| 29 | S&F three track Pre coated Steel Sliding Window System fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 “D” quality, galvanized as per IS 277 with Zinc of 120 grams/ Sq. Mtr.) with total coated thickness of 0.58 mm or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Windows Section for three track external frame should be of 44 x 107mm , Section for window glass shutter should be of 36 x 50 mm, if required Section for shutter horizontal mullion should be 22mm x 60mm, The windows should be paneled with 5mm thick Plain Float glass Gaskets are to be made with Ethyl Propylene Diamine Manomer (EPDM). Corner brackets for internal and external frame made of Polypropylene. Touch lock to be provided for window shuttes Sections are to be cut to length, joined and assembled by means of corner brackets. The above Frame should be fixed to brick/ concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames.Windows shall be provided with fixed Stainless steel 32gauge wire mesh/gauze of 304grade with 144 holes per square inch for mosquito proofing with the help of nut, bolt and flat iron of 20x3mm size on top and Grill made of 10mm MS Square bars welded to 25x4mm angle iron . Distance between bars should not be more than 110mm centre to centre horizontally and 4 Nos vertical bars placed equidistant . Total Grill and wire mesh unit shall be powder coated.Assembling and installation of windows and ventilators shall be all as per details shown/mentioned on drawings and as per manufacturer‟s instructions. complete all as specified and directed. |
| 30 | S&F Pre coated Steel fixed type Window/ ventilator with movable louvers of 4 mm th frosted glass and handle to operate louvers fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 “D” quality, galvanized as per IS 277 with Zinc of 120 grams/ Sq. Mtr.) with total coated thickness of 0.58 mm or Powder Coated with pure Polyester Powder up to 50-60 microns thick. The windows should be paneled with 5mm thick frosted glass Gaskets are to be made with Ethyl Propylene Diamine Manomer (EPDM). Corner brackets for internal and external frame made of Polypropylene. The above Frame should be fixed to brick/ concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames. Windows shall be provided with Grill made of 10mm MS Square bars welded to 20x4mm angle iron . Distance between bars should not be more than 110mm centre to centre horizontal way. Assembling and installation of windows and ventilators shall be all as per details shown/mentioned on drawings and as per manufacturer‟s instructions complete all as specified and as directed |
| 31 | S&F window/ventilator prepainted section of frame 72x55mm fixed to wall or concrete surface with rawl plugs made of galvanised steel and section of shutter 47x20mm, mulion section 72x50mm (Base steel as per IS 513 \\"D\\" quality galvanized as per IS 277 with zinc of 120 gms/Sqm) glazed and wire gauge shutter prepared to receive wiremesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made made of 10mm square bars powder coated fixed to window frame with screws at 110mm c/c horizontal way, 4 mm thick sheet glass, 0.36mm stainless steel wire cloth ieht 1.4mm aperture and necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed. |
| 32 | S & F hasp and staples, size 150 mm, safety type, stainless steel type with hinge pin including bolt to hinge plate and fixed with screws, Complete all as specified and directed |
| 33 | S&F Continuous (piano) hinges, stainless steel (AISI 316 grade), bright finish ,Width of flap (when open), 30 mm . (ISI Marked). Complete all as specified and directed |
| 34 | S & F Ball bearing runners 400 mm Telescopic (KA 5632) full extension load capacity 45 kgs complete all as specified and directed. |
| 35 | S & F D-type cabinet handles premium quality, stainless steel 304 / gloss chrome / SN finished 150 mm long matt finished complete fixed in position complete all as specified and directed. |
| 36 | S & F magnet catcher suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed. |
| 37 | S & F Stainless Steel 304 grade wire Basket of pull out type like lain / cup & saucer / bottle / multi purpose / 2-3 shelf baskets etc for kitchens of required sIze complete fixed in position all as specified and directed. |
| 38 | S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 39 | S&F 300 mm long Stainless Steel sliding door bolt (AISI 316 grade) bright finish of heavy quality with hasp, staple (bolt type) and fixing bolts and sliding bolts complete all as specified and directed. |
| 40 | S&F in floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 150 mm complete all as specified and directed. |
| 41 | S&F in repair for 25mm dia and 1.2 mm thick Stainless Steel Curtain Rod with & including fixing SS brackets and decorative type SS knobs on both ends incl T/D of any type old curtain rods and making good disturbed surfaces with cement mortar or putty complete all as specified and directed Note- measurement will be taken between end points of knobs. |
| 42 | S&F 100 mm long Stainless Steel butt hinges (AISI 316 grade) complete all as specified and directed. |
| 43 | S&F 150 mm size Stainless steel handles (AISI 316 grade) heavy weight of good quality complete all as specified and directed. |
| 44 | S&F 200 mm long Stainless steel barrel tower bolts (AISI 316 grade) heavy weight of good quality complete all as specified and directed. |
| 45 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed. |
| 46 | Hacking out old broken glass (any thickness, size quality or description) form wooden frames or steel,Alu, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed. |
| 47 | S&F 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 48 | Taking down existing water proofing treatment/membrane of any type and Cleaning the surface of roof, palstered surfaces etc by roughening, picking, sweeping clean and washing down with water to remove all loose dirt etc complete all as specified and directed. |
| 49 | M&L for water proofing treatment to roof surface complete all as specified & directed by Engr-in-Charge laid with following course of descrition below :- :- (a) Apply evenly bituminous based primer confirming to IS: 3384-1965 @ 0.30 kg/sqm. (b) APP modified bituminous membrane 3mm thick with non woven polyester core of weight not less than 3.2 to 3.5 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm in longitudinal and transverse direction shall be sealed/fused by flame torch application as per manufacturer instructions. membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (c) Applying aluminium paint over membrane @ 0.20 Kgs/Sqm in two coats over APP membrane complete all as specified and directed. |
| 50 | M&L for 40 mm thick cement concrete 1:2:4 type B-0 (20 mm graded stone aggregate) over RCC roof surface (accessible or non accessible) over and incl one coat of cement slurry admixed with acrylic bonding compound SBR latex based liquid polymer as to be used for bonding of new concrete/mortar to old surface as per manufacturer instructions and finishhing the surface even and fair (without using extra cement) as in roof padding to receive plaster complete all as specified and directed.Note- The work is required to be carried out at non accessible roof for double storey. The contractor shall make arrangement of scaffolding,safety & security of workers and make arrangement for approach to roof. The rates quoted shall deemed to be included for all above items.complete all as specified and directed. Please Enable Macros to View BoQ information |
| 51 | M&L for 40 mm thick cement concrete 1:2:4 type B-0 (20 mm graded stone aggregate) over RCC roof surface (accessible or non accessible) over and incl one coat of cement slurry admixed with acrylic bonding compound SBR latex based liquid polymer as to be used for bonding of new concrete/mortar to old surface as per manufacturer instructions and finishhing the surface even and fair (without using extra cement) as in roof padding to receive plaster complete all as specified and directed.Note- The work is required to be carried out at non accessible roof for double storey. The contractor shall make arrangement of scaffolding,safety & security of workers and make arrangement for approach to roof. The rates quoted shall deemed to be included for all above items.complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender