Tender For Provision Of Otm And Allied Infra Including 350 Kw Solar Power Plant At Nagrota Under Ge (P) Nagrota
Tender Value
80.96 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
13 days left
EMD
1.46 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Otm And Allied Infra Including 350 Kw Solar Power Plant At Nagrota Under Ge (P) Nagrota
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A' Part-I (Building Work):-This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as \\"Rs. 0.00\\" under col.5 signifies this fact only. |
| 2 | Construction of block of Pump House cum Control and Duty Room with Verandah and ramp complete all as specified and shown on drawings. |
| 3 | Construction of RCC Underground Sump of capacity 50,000 ltrs capacity complete all as specified and shown on drawings. |
| 4 | Total Amount of Sch 'A' Part - II (Internal Electric Supply) |
| 5 | Total Amount of Sch 'A' Part - III (Internal Water Supply) |
| 6 | Total Amount of Sch 'A' Part - IV (Plumbing Work) |
| 7 | Total Amount of Sch 'A' Part - V (Sewage Disposal) |
| 8 | Total Amount of Sch 'A' Part - VI (Sewage Treatment Plant) |
| 9 | Sch 'A' Part -VII (Misc Items of Work) Note : This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as \\"Rs. 0.00\\" under col.5 signifies this fact only. |
| 10 | LED Batten lights fttings 1 x 20Watt, 220V, AC complete all as specified and directed. |
| 11 | LED lamp 9 Watt all as specified and directed. |
| 12 | LED building Security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 13 | Design, Supply, construction, installation, testing & commissioning of Sewage Treatment Plant capacity 100 KLD based on principle of aerobic attached growth non-clogging randomly Moving Bed Bioreactor (MBBR), including all electromechanical equipments, instrumentation works and civil works, required foundations and & covering of all motors with MS sheets covers & the following:-(a) 01 Nos Fine bar screen chamber fitted with screen (02 Nos) of Stainless steel to be installed in Fine Bar screen chambers, provided at an angle of 60° to prevent floating objects passing through it and subsequently removing manually and dumped for further disposal.(b) 01 Nos Oil & Grease Removal Chamber in RCC construction with design mix concrete of grade M-30, for removal of free floating Oil & Grease in the sewage.(c) 02 Nos Equalization tank in RCC/HDPE construction with design mix concrete of grade M-30 to cater for the peak discharge including provision of diffused air to ensure that septic conditions do not occur in tank at all. One lot of air grid for equalization tank for providing aeration in the tank.(d) 02 Nos (1W + 1S) raw sewage pumps complete with motor,starter and all necessary accessories and fittings, to be installed for transferring sewage from equalization tank to process reactor. Level sensor should be provided in the tank and interlinked with pumps for ON-OFF operation as per water level in the tank. One pressure gauge for each pump has to be provided to measure pressure at the outlet. |
| 14 | (e) 02 Nos (1W + 1S) Air blower complete with motor,starter and all necessary accessories & fittings, for providing air in equalization tank, MBBR reactors & Sludge holding tank. One no. Air rotameter is to be provided in each line to MBBR reactor 1 & 2, EQT & SHT for measurement of quantity of air.(f) One lot of anoxic chamber (MS-FRP) of suitable capacity as required.(g) 02 Set of MBBR Tank (MS-FRP) with internals comprising of media, SS air grid & riser pipe, media retaining sieves, etc.(h) 03 Nos (1W + 1S) sewage centrifugal monobloc self-priming recirculation pumps complete with motor,starter and all necessary accessories and fittings. One pressure gauge for each pump is provided to measure pressure at the outlet.(j) 01 Nos of Tube settler tank (MS-FRP) with internals comprising of media, supporting structure & collection through.(k) 01 Nos Chlorine Contact cum Filter feed tank (HDPE type) with one set of chlorine dosing system comprising of solution tank and dosing pumps with necessary connection for dosing of solution in chlorine contact tank. |
| 15 | (l) 02 Nos (1W + 1S) filter feed centrifugal monobloc pumps complete with motor,starter and all necessary accessories and fittings for feeding tertiary unit, Level sensor should be provided in the chlorine contact cum filter feed tank and interlinked with pumps for ON-OFF operation as per level in the sump. One pressure gauge for each pump is provided to measure pressure at the outlet.(m) 01 Nos Pressure sand filter (FRP type), complete with all accessories.(n) 01 Nos Activated Carbon Filter (FRP type), complete with all accessories.(o) 02 Nos Treated Water tank (HDPE type), complete with all accessories.(p) 01 Nos Sludge Holding Tank (HDPE type), complete with all accessories.(q) 01 Nos electrical control Panel of suitable size as per manufacturer recommendation for operation of all electromechanical units of sewage treatment plant.(r) One lot of suitable size Piping & valves of suitable material to interconnect various units as per site layout.(s) One lot of Power & control cables to interconnect various drives and instrumentations with STP panel. |
| 16 | Supply, laying and testing ductile Iron pipe with Spigot and Sockets Class “K-9” of size 100 mm (4”) dia |
| 17 | Brick masonary chamber (Valve pit) for opening and closing valve of internal dimensions (900mm x 900mm x 900mm) build in CM 1:6 including fixing MS sheet cover 3 mm thick over angle iron frame of size 40x40x5 mm with laying and locking arrangement and 15mm thick cement plaster in CM 1:4 internally with two coat of synthetic enamel paint over one coat of red oxide primer including necessary excavation and earth work in any type of soil/strata, complete all as specified and directed. |
| 18 | Brick masonary chamber (Valve pit) for opening and closing valve of internal dimensions (1200mm x 1200mm x 1200mm) build in CM 1:6 including fixing MS sheet cover 3 mm thick over angle iron frame of size 40x40x5 mm with laying and locking arrangement and 15mm thick cement plaster in CM 1:4 internally with two coat of synthetic enamel paint over one coat of red oxide primer including necessary excavation and earth work in any type of soil/strata, complete all as specified and directed. |
| 19 | Centrifugal Monoblock pump set of suitable HP , 415 Volt three phase system having discharge capacity not less than, 417 LPM at 25 mtr head complete all as specified and directed. Make - Klassic Pumps, Model No. CPM-11 or equivalent as approved by GE. |
| 20 | 3 phase Auto start DOL Starter in SS enclosure suitable for 5 HP Centrifugal monoblock pump set, incorporating heavy duty 4 pole contactor type YC1-DX with wide band operating coil, overload relay type LR3D with manual re-set and yellow flag for trip indication, electronic auto switch for protection against single phase, phase reversal & phase unbalance and 3 position selector switch-SPP Auto/SPP Manual/Manual having provision of 6 way terminbal block for bottom cable entry complete all as specified and directed.Make - C&S, Cat Part No. BE1-DXSD204-314 or equivalent as per list attached. |
| 21 | Supply, installation, testing and commissioning of Non clog vertical submersible pumps of capacity 3 HP, 415V, 3 phase, 50Hz suitable for head 3-17 m with chrome steel impeller and cutter, non-clog to pass 40 mm size particles complete all as specifiedMake - Crompton or equivalent, Cat Ref - STPM32(3PH) |
| 22 | Submersible Pump Starter DOL of rating 3 HP, 3 phase Relay range 5.5-8 Amp, incorporating heavy duty 4 pole contactor type TC1-DX, overload relay type LR3D, Auto Start Switch, 3 position selector switch for SPP Auto/SPP Manual/Manual (AS4), On/Off Rocker switch, RYB LED indicator, Motor On & Trip LED Indicator complete all and specified and directed.Make - C&S Cat Part No. BE1-SPSSDX204312-B or equivalent as per list attached. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender