Tender For Repairs To Drain, Culvert, Including Coping, Pointing, Kerb Stone And Repairs To Fencing, Chain Link Fencing, Barbed Wire, Posts, Pillars, Grills And Gates At Zone ‘A At installation Rajali Nas Arakkonam.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
19 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranipet → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Drain, Culvert, Including Coping, Pointing, Kerb Stone And Repairs To Fencing, Chain Link Fencing, Barbed Wire, Posts, Pillars, Grills And Gates At Zone ‘A At installation Rajali Nas Arakkonam.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 2 | M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement mortar 1:6 complete all as speciifed and as directed |
| 3 | Ditto all as per SI.No.2 above but except stone complete all as speciifed and as directed |
| 4 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 40mm complete all as speciifed and as directed. |
| 5 | M & L for Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specified and as directed. |
| 6 | M & L for Flush pointing to random rubble masonry, uncoursed or brought upto courses in CM 1:4 complete all as specified and as directed. |
| 7 | M & L for Cement concret of type C1, 1:3:6 of (20 mm aggregate) in Coping , lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 8 | M & L for Cement concret of type B1, 1:2:4 of (20 mm aggregate) as in Surface chennel/drains complete all as specified and as directed. |
| 9 | Extra for forming fair finished drain or channel not exc 60 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed. |
| 10 | M & L brick work with modular flyash bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as specified and as directed complete all as specified and as directed.. |
| 11 | Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and as directed. |
| 12 | M & L Rendering for 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and as directed. |
| 13 | M &L applying two coat of cement based paint over a coat of primer alkali resistance on newly plastered or unplastered wall surface including preparation of surface,complete all as specified and as directed. |
| 14 | Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 15 | M & L for providing Precast RCC 1:2:4, Type B-1 using 20mm graded stone aggregate as in landings, cover slabs [for manholes etc], chullah hoods, chajjas, water troughs, mangers, Shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed. |
| 16 | S & F Reinforcement TMT steel bars of 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 17 | Cleaning/Desilting of bed of drains constructed in any masonry, of any depth including removal of vegitation growth or bushes, roots and getting out including disposing off excavated silt, soil, vegitation, shrubs etc. to a distance not exc 100m where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. |
| 18 | S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed. |
| 19 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brick work, masonry etc including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 20 | Dismantling fencing wire mesh, any type, complete all as specified and as directed. |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for all as specified and as directed. |
| 22 | Material and labour for raised pointing to to random rubble masonry, uncoursed or brought upto courses in CM 1:3 complete all as specified and as directed. |
| 23 | M & L for plain cement concrete type D2 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 24 | M & L for plain cement concrete type C1 1:3:6 (20 mm graded aggregate) as in foundations, filling and mass concrete for embedding the vertical fencing posts complete all as specified and as directed. |
| 25 | M & L for providing precast cement concrete type B0 1:2:4 (using 12.5 mm graded aggregate) set in cement mortar 1:4 as in columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rageblocks, bonders(for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces, including chamfers,weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and as directed. |
| 26 | S & F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips complete all as specified and as directed. |
| 27 | S & F Mild steel TMT bars 5mm dia and over upto and including 10mm diain stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 28 | S & F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 29 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. |
| 30 | Supply only Chain link MS galvanisd fencing, any size or type n exc 4 kg/sqm complete all as specified and as directed. |
| 31 | Supply only mild steel TMT bar 8 to 10mm size for using fencing complete all as specified and as directed |
| 32 | S & F in Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm rredia barbs at 75mm spacings and straining and fixing to any type of standardrails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed.(each line wire to be measured) |
| 33 | Supply and fix in repairs 900 mm dia razor blade galvanised barbed6concertina coil having minimum weight of 8 kg(+) or(-) 5% per coil of 2.6mm dia wire streched to a length of5 to 6m as in fencing to steel posts and to another coil/ MS nibs including fixing with special galvanised fasterners such as J clips, C clips, U clips complete all as specified and as directed.Note:- After streching the coil, the length of the compound wall on which it has been streched shall be considered for measurement. |
| 34 | M & L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 35 | M & L for preparation of new steel surfaces of any description, n exc 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 36 | Material and labour for preparation of old decorated surfaces of walls and applying one coats of colour wash complete all as specified and as directed. |
| 37 | Material and labour for one coat of synthetic enamel painting on old painted steel surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender