Tender For Comprehensive Maintenance Of Ctvs Bldg At Ahrr Under Ge E/M repair renovation Hospital Delhi Cantt-10
Tender Value
40 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
13 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Of Ctvs Bldg At Ahrr Under Ge E/M repair renovation Hospital Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified. |
| 2 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 3 | M&L for brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed. |
| 4 | Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 5 | M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:6, finished the surface fair and even, complete all as specified and directed. |
| 6 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 1 to 2mm thick cement base wall care putty, complete all as specified & directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), and rubbish off the premises, complete all as specified & directed. |
| 8 | M&L 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes, complete all as specified & directed. |
| 9 | M&L 10 mm thick screed bed or bedding layer in cement mortar (1:4) to receive wall tiles, complete all as specified & directed. |
| 10 | M&L for vitrified ceramic coloured tiles 7-9 mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified. |
| 11 | M&L for vitrified ceramic coloured tiles 7-9 mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in dado/ skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified. |
| 12 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified & directed. |
| 13 | M&L for coloured glazed ceramic wall tiles as in vertical surfaces of size 450 mm x 300 mm x 7 to 8 mm thick (with multi colour combination in pattern as directed), set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified & directed. |
| 14 | Demolition of stone slabs or tiles of any description or thickness in any position laid, bedded and pointed in any mortar, complete all as specified & directed. |
| 15 | M&L for 18 to 20 mm thick granite of any type including Z-Black Granite (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2), using marble dust with admixture of pigment to match with shade of granite including 10mm thick screed bed or bedding layer in CM 1:4, complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, fillets etc & existing electrical wiring and removal of debries from site, complete all as specified and directed. |
| 17 | M&L for exposed GI frame/ grid system duly powder coated for module size of 600 x 600 mm suitable for lay-in aluminium/ metal/ mineral fiber ceiling ties having main T runner of 24mm size, suspended at 1200 mm C/C and cross T runner of 24 mm size, suspended at 600 mm C/C with interlocking arrangement to form grid of 600 x 600 mm , perimeter runner/ channel of 15 mm size, main and cross T runner supported by 4mm dia GI rod from slab/ roof, wall angle etc with and including all fixing accessories and making good of disturbed wall surrfaces with POP and one coat of oil emulsion distemper, as required to match the existing surfaces, complete all as directed . |
| 18 | M&L for metal false ceiling, lay-in type, 0.5mm thick having tegular edge profile , duly powder coated, perforated type with glass fiber acoustic fleece, suitable for false ceiling grid/ frame module of 600 x 600mm size, complete all as specified and directed. (Note : The grid/ frame shall be measured and paid for separetly). |
| 19 | S&F solid PVC wall panelling consisting of 5mm thick wood grain finish PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications, complete all as specified & directed. |
| 20 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification, complete all as specified & directed. |
| 21 | S&F solid PVC lipping of 2mm wood grain finish PVC sheet is heat bent as as liping on the edges of doors, windows & other edges inclusive solvent cement and fixing at site, complete all as specified & directed. |
| 22 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc 1.50 sqm each, complete all as specified & directed. |
| 23 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc 1.50 Sqm but n.exc 4.00 sqm each, complete all as specified. |
| 24 | S&F aluminium door chowkhat with powder coating (minimum thickness of powder coating 50 micron) of 100x44x1.5mm section with rebate complete frame, complete all as specified and directed. |
| 25 | Supplying, fabricating & fixing aluminium door shutters with powder coating (minimum thickness of powder coating 50 micron), vertical stile of door shutter of size 85mm x 44.45mm x 1.5mm thick, top, middle and bottom rail of size 85mm x 44.45mm x 1.5mm thick and fixing 5mm thick plain/ tinted sheet glass or 4mm thick ACP sheet with aluminium beading and rubber gasket/ beading as directed. One mortice lock for alumium door (each) and three nos aluminium hinges of size 100mm, 150mm size handle and two alumium tower bolts of 150mm size for each door fixed with rawl plug includimg rectification of floor/ wall to match the existing surface, complete all as specified and directed. (Cost of sheet glass/ ACP sheet shall be measured and paid seperately). |
| 26 | Supplying, fabricating & fixing in repairs aluminium partition wall of aluminium section 100mm x 44mm x 1.5mm thick frame rectangular section and panel of ACP sheet or prelaminated board in bottom panel and 5.5mm thick glass in top panel with rubber lining and aluminium beading around length including necessary fixing arrangements for bottom and top member of alumium frame in floor/ PCC/ Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre, all as specified and directed. (Cost of sheet glass/ ACP sheet shall be measured and paid separately). |
| 27 | M&L for 5mm thick plain/ frosted glass fixed with beading in aluminium frame, complete all as specified. |
| 28 | S&F 4mm thick aluminium composite panel (ACP) sheet including necessary clips, rubber packing and aluminium beading, complete all as specified. |
| 29 | S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels commercial type, complete all as specified and directed. |
| 30 | S&F 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified. |
| 31 | S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified. |
| 32 | S&F 150mm size aluminium alloy handle, fabricated type, anodised, complete all as specified and directed. |
| 33 | S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified. |
| 34 | M&L for preparation of new wooden surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthatic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 35 | M&L for preparation of old wooden surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed. |
| 36 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 37 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube S&F in opening as per specification and drgs, complete all as specified. |
| 38 | S&F aluminium anodised, barrel tower bolts 100mm size of extruded section, all as specified and directed. |
| 39 | S&F 100mm size aluminium alloy handle, fabricated type, anodised, complete all as specified and directed. |
| 40 | S&F in replacement toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, edges rounded and etching works etc and all kind of stainless steel patch fitting & fixtures, spider patch etc, complete all as specifed and directed. |
| 41 | S&F stainless steel handle 450mm long fixed to 12mm thick toughened glass door with and including all fixing accessories i.e. bolt, washer, adhesive etc, complete all as specified and directed. |
| 42 | S&F stainless steel door lock, glass to glass type, suitable for 12mm frameless toughened glass door with and including all fixing accessories i.e. bolt, washer, screws, adhesive etc, complete all as specifeed and directed. |
| 43 | Dismantling boarding any description, fixed in any position with screws, complete all as specified & directed. |
| 44 | S&F 18/19mm thick PVC moulded solid board, one side pre-laminated for cabinets boxes, shutters etc with shelf and shutters, full size fitted under/ above kitchen cooking platform and other platform, complete all as per manufacturer's instruction and as specified & directed by Engr-in-Charge. |
| 45 | S&F soft closing clip on hinges, full/ half overlay type, of stainless steel of size as per site requirement or as directed. |
| 46 | S&F 100mm size stainless steel handles with matt finish fixed with screws, complete all as specified & directed. |
| 47 | S&F multipurpose lock 50mm size with triple keys, suitable for cupboard door/ drawer, complete all as specified & directed. |
| 48 | S&F stainless steel telescopic type ball bearing slide and runner, suitable for drawers of size as per site requirement, complete all as specified & directed. |
| 49 | S&F magnetic catchers 302 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed. |
| 50 | S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and directed. |
| 51 | S&F in repairs 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed. |
| 52 | S&F in repairs 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed. |
| 53 | S&F in repairs 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed. |
| 54 | S&F in repairs 150mm size aluminium alloy handle, fabricated type, anodised, complete all as specified and directed and directed. |
| 55 | S&F in repairs 100mm size aluminium alloy handle, fabricated type, anodised, complete all as specified and directed and directed. |
| 56 | S&F in repairs 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed. |
| 57 | S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length 140mm, complete all as specified and directed. |
| 58 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specifed and directed. |
| 59 | S&F in repairs door closer aluminium (die casted) body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 60 | S&F in repairs stainless steel curtain rod 25mm dia of including brackets, side knobs etc, fixed to walls, complete all as specified and directed. |
| 61 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed. |
| 62 | S&F 5.5mm thick plain/ frosted glass, ordinary quality and glazing with glazing clips/oil putty in squares not exceeding 0.50 sqm in each pane, complete all as specified and directed. |
| 63 | S&F 5.5mm thick plain/ frosted glass, ordinary quality and glazing with glazing clips/oil putty in squares exceeding 0.50 sqm in each pane, complete all as specified and directed. |
| 64 | Taking up or down 15mm bore steel tubing and connections, complete all as specified & directed. |
| 65 | S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified. |
| 66 | Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, complete all as specified & directed. |
| 67 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified. |
| 68 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified. |
| 69 | S&F 110mm bore PVC (SWR) bends any radius, complete all as specified & directed. |
| 70 | S&F 75mm bore PVC (SWR) bends any radius, complete all as specified & directed. |
| 71 | Taking up cast iron water mains (including all fittings) 100mm bore, with spigot and socket ends and lead joints including burning out joints and recovering lead, all as specified. |
| 72 | Taking up cast iron water mains (including all fittings) 80mm bore, with spigot and socket ends and lead joints including burning out joints and recovering lead, all as specified. |
| 73 | S&F 110 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, all as specified. |
| 74 | S&F 75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, all as specified. |
| 75 | S&F bends 100mm (any radius), diminishinh pieces or tapers (larger bore measured), all as specified. |
| 76 | S&F bends 75mm (any radius), diminishinh pieces or tapers (larger bore measured), all as specified. |
| 77 | S&F in repair white vitreous china wash hand basin (flat back) of size 550 x 400 mm fixed on and including new brackets complete including 32 mm size brass chromium plated waste coupling, 75 mm long PVC waste pipe, chain and plug and porcelain stopper, etc, complete all as specified & directed. |
| 78 | S&F in repair white vitreous china countertop wash hand basin, mounted on a worktop console or piece of vanity furniture of oval range provides ample storage below for a variety of items, including waste coupling, wall bracket, waste pipe of suitable size, etc complete all as specified & directed. |
| 79 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified & directed. |
| 80 | S&F in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified & directed. |
| 81 | S&F in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 440 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed.. |
| 82 | S&F in repairs PVC low level flushing cistern, valve less, Syphonic action type, double push bottom, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection complete all as specified. |
| 83 | S&F in repairs chromium plated shower rose with arm 125mm size with or without swivel joints, all as specified. |
| 84 | S&F in repairs white vitreous china urinal, full stall type, white (excluding flushing cistern, flush pipe) including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60 mm long brass screws, pointing around urinal back in cement, ; fixing automatic flushing cistern with brackets, and waste pipe, complete all as specified. |
| 85 | S&F in repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms), complete all as specified. |
| 86 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified & directed. |
| 87 | S&F in repairs PVC waste pipe including tail 75cm long suitable for stainless steel sink, urinals etc, complete all as specified. |
| 88 | S&F in repairs PVC waste pipe including tail 75cm long suitable for WHB etc, complete all as specified. |
| 89 | S&F in repairs bib taps, cast copper alloy, fancy type, with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified & directed. |
| 90 | S&F in repairs stop valves, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type), with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified & directed. |
| 91 | S&F in repairs pillar taps, cast copper alloy, fancy type, chromium plated with capstean head screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts, screwed for 15mm bore pipe, complete all as specified & directed. |
| 92 | S&F in repairs two way angle cock chromium plated for fixing with flusing cistern/ jet spray/ health faucet etc, complete all as specified & directed. |
| 93 | S&F in repairs WHB mixer without pop up waste system, long body, made of cast copper alooy, chromium plated fancy type, suitable for 15mm bore pipe, complete all as specified & directed. |
| 94 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm, all as specified & directed. |
| 95 | S&F in repairs 600 mm x 450 mm size bevelled edge mirror 5 mm thick of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified & directed. |
| 96 | S&F in repairs tubular towel rail stainless steel chromium plated 20 mm dia D type 60 cm long between flanges, including brackets and fixed to walls, all as specified and as directed. |
| 97 | S&F in repairs health faucet (ABS body) mild steel chromium plated for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position, complete in all respect as specified. |
| 98 | S&F in repairs soap dish, brass CP any type, fixed to plugs with chromium plated brass screws Complete all as specified and directed. |
| 99 | S&F in repairs toilet paper holder of brass, cromium plated fixed to walls with chromium plated (CP) brass screws, complete all as specified. |
| 100 | S&F in repairs corner glass shelf with bracket and fixing accessories, complete in all respect as specified. |
| 101 | S&F in repairs for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as directed. (Note : All fixtures and fittngs should be of stainless steel). |
| 102 | S&F false ceiling of 12.5 mm thick tapered edge gypsum board confirming to IS 2095 including providing and fixing frame work made out of special sections power pressed from MS Sheet and galvanised in accordance with zink coating and consisting of angle cleat of size 25 mm wide X 1.6 mm thick with flange of 22 mm and 37 mm at 1.2 mtr C/C , Angle fixed to the ceiling with dash fastener 12.5 mm dia x 40 mm long with 6 mm dia bolts to the angle hangers of 25x25x0.5-0.8 mm thick running @1.2 mtr C/C to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm , shall be fixed in a direction perpendicular to GI Channel with connecting clips made out of 2.64 mm dia x 130 mm long GI wire at every in including fixing the gypsum board with ceiling section and perimeter channel 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long the perimeter of ceiling fixed to wall / partition with the help of raw plug at 450 mm c/c with 25 mm long screws @ 230 mm internal including jointing and fixing to a flush finish of tapered and square edge the gypsum board with filler and finish with POP as per approved colour, paper tapes including making opening for light fittings ,AC grills,diffusers cut outs made with frames of perimeter channels complete in plain horizontally / vertically location including applying coats of plastic emulsion paint over a coat of approved primer on gypsum board false ceiling horizontally / vertically as specified (at ceiling height up to 8 mtr appx) complete all as specified . Note:- (i) Dismantling of E/M & AC services such as cables and supply lines, ducts and any other service lines has to be removed and refixed as per E/M schedule without affecting existing services and problem during execution. (ii) Ceiling to be executed in any design / pattern / level as per site requirement and measured as clear span. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender