Housing Urban and Rular Development Government Departments Closing in 4 days TDR #56884575

Tender For Construction Of A Permanent Helipad For Safe Landing And Take-Off Of The Government Helicopter During The Visit Of His Excellency The Governor, Honorable Chief Minister And Deputy Chief Minister During The Visit Of His Excellency The Gover

Issued by Government Departments · Ballia, Uttar Pradesh
Tender Value
1.06 Crore
Estimated cost
Bid Submission
13 Aug 2026
4 days left
EMD
7.30 Lakhs
Bank guarantee accepted
Document Fee
2590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ballia → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of A Permanent Helipad For Safe Landing And Take-Off Of The Government Helicopter During The Visit Of His Excellency The Governor, Honorable Chief Minister And Deputy Chief Minister During The Visit Of His Excellency The Governor, Honorable Chief Minister And Deputy Chief Minister To The State Under Development Block Fifteenth.

BOQ

Name of Work:- विकास खण्ड पन्दह के अन्तर्गत राजस्व ग्राम धनेजा में महामहिम राज्यपाल महोदय, मा० मुख्यमंत्री जी, मा० उप मुख्यमंत्री जी के प्रदेश भ्रमण के दौरान राजकीय हेलीकाप्टर के सुरक्षित लैडिंग एवं टेक ऑफ हेतु स्थायी हैलीपैड के निर्माण का कार्य।
Sl. No. Item Description
1Construction of Helipad- Cleaning and Grubbing road land including uprooting rank vegetation, Grass, bushes, shrubs saplings and trees girth upto 300mm., removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking santiceable maeriale to be used of
2Constn. Of sub grade and earthen shoulder with approved materials obtained from borrow pit with all lead and lift transporting to site spreading grading to required slope and compacted to meet requirement of table 300-2
3Construction of granular sub-base by providing well graded spreading in uniform layers with motor grader on preapared surface, mixing by mix in place method with rotavater at OMC, and compacting with smooth wheel roller to achieve the desired dencity, complete as per technical specification clause 401 of MORTH data book
4Construction of Dry lean cement concrete sub base over a prepared sub grade with coarse and fine aggregate not exceding 25mm aggregate cement ratio not to exceed 15:1 aggregate gradation after blending to be as per table 600-1 optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10Mpa at 7 days. mixed in a batching plant transported to site laid with a paver with electronic sensor compacting with 8-10 tonne
5vibratom roller finishing and curing Construction of un-reinforced dowel jointed plain cement concrete pavemengt over a prepared sub base with 43 grade cement @ 400kg per cum coarse sand fine aggregatges conforming to IS.383. maximum size of coarse aggregate not exceeding 25mm. mixed in a concrete mixer of not less than 0.1 cum. capacity and appropriate weigh batcher using approved mxi design. laid in approved fixed side formwork & 125 micron thickness polythene film including levelling the formwork as per drawing, spreading the concrete with sholvels rakes compacted using meedle, screed and plate vibrator and finished in continuous operation including provision of contraction and expansion curing of concrete slabs
6Interlocking Tiles- Rubber moulded reflective Zig Zag 80mm Providing and laying of Interlocking concrete block pavment having thickness 80mm As per drawing and techincal specification clause 1504
7Plain con crete 1:3:6 nominal mixin foundation with crushed stone aggregate 40mm nominal size mechanically mixed place in foundation and compacted by vibration including curing 14 days.
8Brick machinery work in cement mortar 1:3 in foundation complete excluding pointing and plastering as per drawing and Technical specification
9Painting with synthetic enamel paint of approved brand and manufacture of required colour in give an even shade. Two or more coat on new wori over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR No 13-62-1
10Construction of Approach Road- Cleaning and Grubbing road land including uprooting rank vegetation, Grass, bushes, shrubs saplings and trees girth upto 300mm., removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking santiceable maeriale to be used of
11Constn. Of sub grade and earthen shoulder with approved materials obtained from borrow pit with all lead and lift transporting to site spreading grading to required slope and compacted to meet requirement of table 300-2
12Construction of granular sub-base by providing well graded spreading in uniform layers with motor grader on preapared surface, mixing by mix in place method with rotavater at OMC, and compacting with smooth wheel roller to achieve the desired dencity, complete as per technical specification clause 401 of MORTH data book
13Providing, laying, spreading and compacting stone aggregate of specific size 22-4-53mm to water bound macadum specification including spreading in uniform thickness hand packing Rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber applying and brooming stone screening to fill up the interstices of coarse aggregate watering and compating to the required
14Construction of un-reinforced dowel jointed plain cement concrete pavemengt over a prepared sub base with 43 grade cement @ 400kg per cum coarse sand fine aggregatges conforming to IS.383. maximum size of coarse aggregate not exceeding 25mm. mixed in a concrete mixer of not less than 0.1 cum. capacity and appropriate weigh batcher using approved mxi design. laid in approved fixed side formwork & 125 micron thickness polythene film including levelling the formwork as per drawing, spreading the concrete with sholvels rakes compacted using meedle, screed and plate vibrator and finished in continuous operation including provision of contraction and expansion curing of concrete slabs for 14 days curing compound and water finishing
15Constn. Of sub grade and earthen shoulder with approved materials obtained from borrow pit with all lead and lift transporting to site spreading grading to required slope and compacted to meet requirement of table 300-2 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56884575
AUTHORITY Government Departments
TENDER VALUE 1.06 Crore
LAST DATE 13-08-2026
Authority
Authority Name Public Works Department
Work Description Tender for Construction Of A Permanent Helipad For Safe Landing And Take-Off Of The Government Helicopter During The Visit Of His Excellency The Governor, Honorable Chief Minister And Deputy Chief Minister During The Visit Of His Excellency The Governor, Honorable Chief Minister And Deputy Chief Minister To The State Under Development Block Fifteenth.
Basic Detail
Tender No 3441/NIVIDA (PD)/BALLIA CIRCLE/2026 DATE 28.07.2026
Bidding Type Tender
Location
City Ballia
State Uttar Pradesh
Key Dates
Publish Date 07 Aug 2026
Submission Date 13 Aug 2026
Open Date 13 Aug 2026
Finance
Tender Value 1.06 Crore
Tender Fee 2590
EMD 7.30 Lakhs
Exemption Available
Document List
8beaa468-25e5-4cdf-887b-b0e6447eb84e.html
BOQ_2207798.xls
T2.pdf
Tendernotice_1 (30).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 13, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Aug 13, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

8beaa468-25e5-4cdf-887b-b0e6447eb84e.html

xls

BOQ_2207798.xls

pdf

T2.pdf

pdf

Tendernotice_1 (30).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders