Tender For Providing Power Supply To Sagar Hostel And Swaraj Hostel By Drawing Aerial Bunched Cable(Abc) From Substation No.3, Cusat, Thrikkakara C Us
Tender Value
4.55 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
26 days left
EMD
11400
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Power Supply To Sagar Hostel And Swaraj Hostel By Drawing Aerial Bunched Cable(Abc) From Substation No.3, Cusat, Thrikkakara C Us
BOQ
| Sl. No. | Item Description |
| 1 | Cabling |
| 2 | OD43544/2026-2027. Supply and drawing of 1.1 kV grade, PVC insulated and PVC sheathed Aluminium Aerial Bunched Cable (ABC), suitable for three-phase with neutral configuration, of the following size: 3C x 95 sq.mm + 1C x 70 sq.mm + 1C x 16 sq.mm, conforming to IS 14255 standards : 1995(Make: KEI, Havells, Polycab) |
| 3 | OD43545/2026-2027. Supply of 9 meter length PSC pole as per KSE Board specification at site. |
| 4 | Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.Above 8.0 metre and upto 11.0 metre |
| 5 | Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stayclamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and straininsulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 40 mm nominal size ) foundation including excavation and refilling etc. asrequired. |
| 6 | Supply and fixing of stainless steel strap, suitable for tying clamps and cables to poles or pole structure elements, including stainless steel buckles as required. |
| 7 | Supply of the following accessories for hanging one number of PVC insulated andPVC sheathed Aluminium Aerial Bunched Cable (ABC) of 1.1 kV grade, 95 sq.mmsize, of reputed make: Anchoring Clamp |
| 8 | Supply of the following accessories for hanging one number of PVC insulated andPVC sheathed Aluminium Aerial Bunched Cable (ABC) of 1.1 kV grade, 95 sq.mmsize, of reputed make: Suspension Clamp |
| 9 | Supply of the following accessories for hanging one number of PVC insulated andPVC sheathed Aluminium Aerial Bunched Cable (ABC) of 1.1 kV grade, 95 sq.mmsize, of reputed make: Dead End Clamp |
| 10 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm) |
| 11 | Supply and fixing of Insulation Piercing Connector (IPC), suitable for conductors of the following sizes: Main: 16-95 sq.mm Tap: 10-95 sq.mm |
| 12 | Supply and fixing of Insulation Piercing Connector (IPC), suitable for conductors of the following sizes: Main: 16-95 sq.mm Tap: 4-50 sq.mm |
| 13 | Supply and drawing of Nylon stay/string wire of minimum 4mm size |
| 14 | Supply & Drawing of Aluminium Weather proof wire of the following sizes: 2C*4sqmm |
| 15 | Supplying, installation, testing and commissioning of Astronomical time switch capable of following output in feeder pillars/ Lighting DBs for automatic switching On & OFF of street lights at sun set & sun ruse or twilight override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 1 output per phase and suitable for single phase supply |
| 16 | Supply and installation of 12A, 3-pole power contactor with single phase AC coil (suitable to mount in DIN rail) |
| 17 | Supplying and fixing of Sintex junction box for cable termination (340MM x 250MM x 150MM) along with MCB channel , terminal connectors and all interconnections etc. |
| 18 | Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 19 | Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.40 mm dia with clamps made from 20 x 3 mm MS flat Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 31 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender