Tender For Providing Well, Pumproom,Pipeline And Submersible Pumpset For Manthada And Gandhipettai In Ketti Town Panchayat
Tender Value
39 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
0 days left
EMD
39000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Well, Pumproom,Pipeline And Submersible Pumpset For Manthada And Gandhipettai In Ketti Town Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavating for open cutting and depositing on Bank within initial lead of 10mt and lift of 2m in Hard stiff clay , stiff black cotton , hard red earth, shales ,murram, gravel , stoney earth and earth mixed with small size boulders etc., complete complying with standard specification. |
| 2 | Sinking well in hard stiff clay , light black cotton soil , hadr red earth , shales , murram, gravel , stoney earth and earth mixed with small size boulders and hard gravelly soil including bailing or pumping charges if necessary etc. complete - For 4 M Internal dia I. Depth - 2 Meters |
| 3 | II. Depth - 2 Meters |
| 4 | III. Depth - 2 Meters |
| 5 | Earthwork excavating for foundation and depositing on Bank within initial lead of 10mt and lift of 2m in Hard stiff clay , stiff black cotton , hard red earth, shales ,murram, gravel , stoney earth and earth mixed with small size boulders etc., complete complying with standard specification. |
| 6 | Cement concrete in 1:4:8[one cement and five sand and ten aggregate ] using 40 mm size ISS grade machine crushed chips including the cost of mixinglaying curing etc., complete complying with standard specification. For GLR, well and pump room |
| 7 | Random rubble masonry in c.m 1: 5 (one cement five sand) using best new rough and bond stones including simultaneous pointing above ground level with the same mortor including curing, cost and conveyance of all materials and labour charges etc,complete as per SS. For Well and Pump room |
| 8 | Supplying and Erecting Steel Centering for sides and soffits including supports and strutting plane surfaces such as RCC Slabs, Rectangular Beams, TEE or ELL Beams, Lintels, Bed blocks, Staircase waist and Landing slabs, Landing Beams, canopy etc., with all cross brasings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened with welded MS angles of size 25mmx25mmx3mm for boarding laid over silver oak (CW) joists of size 10cmx6.5 cm spaced at about 90cm c/c and supported by causrina props of 10cm to 13cm dia spaced at 75cm c/c etc., complete complying with standard specification and as Directed . For Curved centering - For GLR,Well |
| 9 | For Plain centering (upto 1 m Height)-For Well and Pumproom |
| 10 | For Plain centering ( 3.29 m Height) -For GLR Outer And Well |
| 11 | Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS. |
| 12 | Reinforced cement concrete in 1:11/2:3[one cement and one and half sand and four the aggregate ] using 20 mm size IRC grade machine crushed chips and excludingcost of reinforcement and centering works and including the cost of mixing,laying , curing ,and etc.,complete complying with standard specification . |
| 13 | Brick work In CM 1:5 mix using best country bricks of size 22cm x 11cm x 7cm having 350kg/cm2 compressive strength and 15% or less water absorbentin the period of 24hours immersement and confirming to ISI specifications.and using the screened sand and all the materials should be approved by the competent technical authorities etc complete complying with standard specification-- |
| 14 | Supplying and fixing of R.C.C Jolly of size 0.45x0.45 including cost and conveyance of all materials and labour charges etc, complete as per SS |
| 15 | Supply and fixing of Mild steel door using L angles , M.S patta , and M.S sheet of reqiured size and gauge including priming coat the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification |
| 16 | Plain Cement concrete 1 : 2 : 4 (one cement, two sand and four aggregates) using 20mm ISS HBG metal including cost and conveyance of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per SS |
| 17 | Plastering in cement mortar 1:3 mix 10mm thick using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortar etc.complete complying with standard specification- |
| 18 | Plastering in cement mortar 1:5 mix 12mm thick using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortar etc.complete complying with standard specification- |
| 19 | Plastering in cement mortar 1:4 mix 20mm thick using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortar etc.complete complying with standard specification |
| 20 | Plastering in cement mortar 1:3 mix 12mm thick using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortar etc.complete complying with standard specification |
| 21 | white washing two coats using best shellime and preparing the surface fit for white washing as confirming to the IS 6278-1971 |
| 22 | Painting Two coats using best quality oil bound distember and the colour should be get approved before applying and etc complete complying with standard specification. |
| 23 | Painting two coats for New iron work surface using best quality synthetic enamel paint etc complete complying with standard specification |
| 24 | Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. |
| 25 | Supplying and delivery of following dia \\"B\\" class GI Pipe , with standard weight and brand and the rate including all cost and conveyance of all materials to site and Labour charges etc complete complying with standard specification. |
| 26 | Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately) |
| 27 | Labour charges for the erection of submersible 10HP pumpset in openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 28 | Laying and jointing G.I pipes and G.I specials to proper gradient and alighnment and testing the pipe with water and the rate including cost and conveyance of all charges etc., complete. |
| 29 | Labour charges for cutting and threading G.I pipes and the rate including cost and conveyance of all charges etc., complete. Cutting 50mm dia pipes |
| 30 | Threading 50mm dia pipes |
| 31 | Supply and fixing of PVC insulated and sheathed 3 core 4 sq mm flat type copper cable conforming to IS 694/1990 for the year 2016-17 |
| 32 | Wiring with 2 X 1.5 sqmm (22.0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painted of suitable colour for PVC open light point etc., completed. |
| 33 | Supply and fixing of TNEB meter board suitable for 32 A Three phase service connection with 3 numbers of 32 A fuse unit (500 volt) 32 Amps neutral link and earth link (1\\" X 1/8\\" Copper flat) on TW plank of size 600 mm X 450mm X 19 mm with supporting TW reepers of 1\\" thick an either side with paining with suitable bolt and nuts for fixing the TW plank on wall earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. |
| 34 | Supply and fixing of 32 A TP NMC Switch on suitable angle iron frame work with M.S cable entry box with earth connections |
| 35 | Supplying and run of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu. conductor of 1100V grade in 25 mm dia G.I pipe ( class B) bent at both ends with neccessary angle iron up right and end support for mains P 32 -SD 70 |
| 36 | Supply and run of 4 of 4 Sq. mm (56/0.3) PVC insulated SC unsheathed cu. Conductor of 1100 V on 7/20 GI bearer wire for service connection mains P 31 - SD- 66 |
| 37 | Supply and fixing of WT bulk head fiitings (philips /bajaj/k.lite / crompton greaves) suitable for incandescent lamp with guard and 11 w CFL P 36 SD-83 |
| 38 | Supply and Delivery of 50mm dia \\"B\\" Class G.I. Specials with ISI mark and Standard brand and the rate including cost and conveyance of all materials to site and Labour charges etc complete complying with standard specification. 50 mm Coupling |
| 39 | 50 mm Elbow |
| 40 | 50 mm NRV |
| 41 | 50 mm Hex Nipple |
| 42 | 50 mm Bend |
| 43 | 50 mm union |
| 44 | 50 mm Tee |
| 45 | 50 mm Gate valve |
| 46 | 50 X 40 mm Reducer Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender