Tender For Construction Of Boundary Wall Of Divisional Store At Khawaja Bagh Baramulla (Amount Of Work:- Rs 9.98 Lacs)
Tender Value
9.98 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
9 days left
EMD
19960
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Boundary Wall Of Divisional Store At Khawaja Bagh Baramulla (Amount Of Work:- Rs 9.98 Lacs)
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres.All kinds of soil |
| 3 | providing and laying of dry stone soling (nallah) including supply of stones |
| 4 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Quarry |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Filling with nallah muck/RBM inside the bathroom plinth and outer staircase landing, in layers not exceeding 20 cm, including ramming, watering, and compaction of each layer, with lead up to 50 m and lift up to 1.5 m, including all carriages up to site of work, complete as directed by the Engineer-in-Charge. |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 11 | Foundations, footings, bases of columns etc. for mass concrete. |
| 12 | Suspended floors, roofs, landings, balconies and access platforms |
| 13 | Under 20 cm wide |
| 14 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 15 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) : From brick work in cement mortar |
| 16 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 17 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 18 | Painting (one or more coats) with black Japan paint of approved brand andmanufacture to give an even shade. |
| 19 | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand)Flush/Ruled Pointing |
| 20 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 21 | Providing and fixing wooden chowkats for bathroom doors and ventilators, made from first class Silver/KD wood, including 230 mm x 40 mm x 6 mm M.S. holdfasts (or as approved), properly embedded in cement concrete blocks, framed and fixed in position with all necessary fixtures and fasteners, Including all carriages up to the site of work, complete in all respects as directed by the Engineer-in-Charge. |
| 22 | Providing and fixing glazed window shutters using first class Silver/Budloo wood and 3.5 mm thick glass panes , including fixing with Stainless steel hinges 3 inch and necessary screws, complete in all respects as directed by the Engineer-in-Charge. |
| 23 | Providing and fixing 35 mm thick wire gauze shutters for doors, windows, and clerestory windows, made of galvanised M.S. wire gauze with average aperture width of 1.4 mm and wire of 0.63 mm diameter, fixed within wooden frames. The item includes fixing with ISI-marked stainless steel hinges and necessary screws, complete in all respects as directed by the Engineer-in-Charge. |
| 24 | Providing and fixing panelled shutters for doors using first class Silver/Budloo wood for styles and rails, including 12 mm thick waterproof plywood board for panelling. The shutter shall be fixed with ISI-marked stainless steel hinges and necessary screws, complete in all respects as per design and as directed by the Engineer-in-Charge. |
| 25 | Providing and fixing 3.5 mm thick clear sheet glass in wooden door/window/ventilator chowkats, including cutting to required sizes and fixing securely with wooden glazing beads, approved nails/screws and putty or sealant wherever required, complete in all respects as directed by the Engineer-in-Charge. |
| 26 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :(100x10 mm) |
| 27 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm |
| 28 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm |
| 29 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 30 | Providing and fixing ISI-marked Aldrop Key Lock of approved size and make such as Godrej, Dorset, or any other reputed brand, including necessary screws, complete in all respects as directed by the Engineer-in-Charge. |
| 31 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 32 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. |
| 33 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 34 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 35 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 36 | Providing and applying Plaster of Paris putty of 2mm thickness overplastered surface to prepare the surface even and smooth complete |
| 37 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wallswherever required :470x420mm bowl depth 178mm |
| 38 | Providing and fixing 110 mm dia PVC pipe Type “B” (conforming to IS specifications) of Finolex, Prince, or any other reputed brand, laid in proper gradient in excavated trenches, including cost of excavation, lowering, laying, jointing with approved solvent cement, testing, and refilling the excavated material as per design/drawings, complete in all respects as directed by the Engineer-in-Charge. |
| 39 | Providing and fixing of the following PVC fittings Type “B”. (with IS specification) of finolex or prince or any reputed brand as per design / drawings approved by Engineer-in-Charge. |
| 40 | Plain bend 110mm dia. |
| 41 | Collar PVC 110mm dia |
| 42 | SWR Door Tee PVC 110mm dia |
| 43 | SWR Multi Floor Trap PVC 110mm dia |
| 44 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge. |
| 45 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 46 | PN-16 pipe , 32mm OD (SDR-7.4) |
| 47 | Providing and fixing of the following PP-R (Poly propylene Random copolymer) pipes fittings (with IS specification) of finolex or RAK or any reputed brand as per design / drawings approved by Engineer-in-Charge. |
| 48 | 25/32 mm PPR Reducer |
| 49 | 32mm PPR Union |
| 50 | 25mm PPR Union |
| 51 | Tank Nipple 32mm |
| 52 | Tank Nipple 25mm |
| 53 | 32mm PPR Ball Valve |
| 54 | 25mm PPR Ball Valve |
| 55 | 32mm PPR Male/Female Adapter |
| 56 | 25mm PPR Male/Female Adapter |
| 57 | P/fixing of CP Jali/grating of approved make. |
| 58 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 59 | P/fixing of CP Wall Sink Mixer tap of approved make Jaquar, Kohler or equivalent make. |
| 60 | Providing and fixing uplasticized PVC connection pipe with brass unions. 45 cm length 15 mm nominal bore. |
| 61 | P/fixing of CP Extension Nipples of approved make. |
| 62 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 63 | Construction of soak pit by stacking precast cement concrete manhole rings of 900 mm diameter to a height of 6 feet, forming two adjacent ring towers. The job includes excavation of pit, lowering and placing of rings, providing precast RCC covers, filling the periphery around the towers with well-compacted brick bats, backfilling with excavated earth, supplying all materials, transporting them to site, and completing the job in all respects to the satisfaction of the Engineer-in-Charge. |
| 64 | Wiring for light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, including providing and fixing modular type switch, switch box with cover plate, and suitable size MS/GI box, complete with all accessories such as clips, saddles, screws, etc., including cutting, chasing, fixing, and making good the wall surfaces as required, all complete as per the directions of the Engineer-in-Charge. (Complete job per point including switch) |
| 65 | Wiring for 5A socket outlet point with 2.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, including providing and fixing modular type 5A socket outlet with 5A switch, switch box with cover plate, and suitable MS/GI box, complete in all respects including cutting, chasing, fixing, and finishing the wall surface, all complete as per the direction of the Engineer-in-Charge. (Complete job per point including switch and socket) |
| 66 | Wiring for 15A power point with 4.0 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, including providing and fixing modular type 15A socket outlet with 15A switch, switch box with cover plate, and suitable MS/GI concealed box, complete with cutting, chasing, fixing, and making good the wall surface, all complete as per the direction of the Engineer-in-Charge. (Complete job per point including switch and socket) |
| 67 | Supply and installation of sheet steel, dust and vermin-proof, wall-mounted SPN type double-door MCB distribution board (8+2 way), suitable for single-phase supply, with neutral and earth bus bars, knockouts for cable entry, and mounting accessories, including fixing on wall surface/recess, all complete as per the direction of Engineer-in-Charge. (Without MCBs) (Set) |
| 68 | Supply and fixing of the following ISI-marked Miniature Circuit Breakers (MCBs), including making connections, testing, and commissioning as required: |
| 69 | SP MCB 6A For lighting circuits |
| 70 | SP MCB 10A/16A For 5A/15A socket circuits |
| 71 | DP MCB 32A/40A As incomer for the DB |
| 72 | Supply and installation of 15 Watt, 230V, surface-mounted LED suitable for ceiling or wall surface mounting, including connection to the existing point, testing, and commissioning, complete in all respects as per the direction of the Engineer-in-Charge. |
| 73 | Supply and laying of 7/16 PVC insulated, single-core copper conductor, for main supply, including fixing on insulators/clamps/brackets, with necessary connections, testing, and commissioning, complete as directed by the Engineer-in-Charge. |
| 74 | the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shapewherever required. |
| 75 | Providing and fixing 8 mm thick ACS (Class 33) commercial-grade laminate flooring with moisture-resistant HDF core, abrasion-resistant wear layer, click-lock interlocking joints, laid over 2 mm thick polyethylene/IXPE foam underlay, including matching skirting, edge trims, cutting, finishing, and all incidental works complete as directed by the Engineer-in-Charge |
| 76 | Carriage of material by Mechanical Transport including loading, unloading and stacking up to site of work. |
| 77 | Stone soiling Quarry for an avg. lead of 07 kms |
| 78 | Aggregate. 40mm for an average lead of 10 kms |
| 79 | Aggregate. 20mm for an average lead of 10 kms |
| 80 | Sand for an Avg. lead 10 kms |
| 81 | Cement for an avg. lead 03 km |
| 82 | Bricks for an avg. lead 30 km |
| 83 | Steel for an avg. lead 05 Km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender