Tender For Rdddc2627103893 Construction Of Flush Point Bathroom For Newly Constructed Masjid Shareef At Banjran Inderwali Block Achgoza
Tender Value
1.98 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
18 days left
EMD
3960
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rdddc2627103893 Construction Of Flush Point Bathroom For Newly Constructed Masjid Shareef At Banjran Inderwali Block Achgoza
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation for foundation in trenches including dressing of sides, ramming of bottom & disposal of excavated soil up to an avg. lead of 50 Mtrs & lift up to 1.5 Mtrs |
| 2 | P/L of dry stone soling ,Hand Packed i/c carriage of material for an average lead of 10 Kmts |
| 3 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors,roofs,landings,balconies etc. |
| 6 | Brick work with common burnt clay F.P.S ( non-modular ) bricks in superstructure upto level V in ( 1 : 6 ) cement mortar including extra cost for above plinth. |
| 7 | Providing and Laying in position Specific grade of reinforced cement concrete. Excluding cost of centering and shuttering-.(1 : 2 : 4 ) mix, using 20mm |
| 8 | Reinforcement for R.C.C work I/C cutting, Bending, Binding and placing in position |
| 9 | 12MM thick cement plaster in 1:6 mix |
| 10 | P/L Cement concrete ( 1 : 4 : 8 ) mix using 20 mm n/S agg. |
| 11 | Providing & fixing angle iron shutters Doors panelled with coloured PGI sheet or CGI sheet and ventilators with welded Mesh wire as per directions of the Engineer in-charge.a ) Door Shutters with frame angle iron 40x40x5mm |
| 12 | Providing & fixing angle iron shutters Doors panelled with coloured PGI sheet or CGI sheet and ventilators with welded Mesh wire as per directions of the Engineer in-charge.a )b ) Ventilators |
| 13 | P/F of pre-cast Circular hollow rings 3 feet dia of M-25 Grade including filling of Boulders in perimeter, pre-cast concrete circular cover . |
| 14 | Finishing walls with white cement based putty two or more coats to give smooth finish over plastered surface |
| 15 | Painting with two or coats of snowcem on exterior surfaces as per specification |
| 16 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 17 | Carriage of Materials Lead 25 Km Sand/Aggregates BY MT |
| 18 | Carriage of MaterialsB) Bricks for an average lead of 35 Km |
| 19 | P/F water storage tank 1000 ltr with necessary fitting and fixtures including water tank nipple, washers etc complete job. |
| 20 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.19.2.1 Internal work-exposed on wall with clamps at 1.00 meter spacing 19.2.1.2 PN-16 pipe , 20mm OD(SDR-7.4) |
| 21 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.19.2.1 Internal work-exposed on wall with clamps at 1.00 meter spacing 19.2.1.1 PN-16 pipe, 16mm OD(SDR-7.4) |
| 22 | P/F of P.V.C pipe (B-type) with necessary fitting and fixtures complete job. a)110 mm |
| 23 | P/F of P.V.C pipe (B-type) with necessary fitting and fixtures complete job. a)110 mm |
| 24 | P/F of stainless steel bib cock with 15 mm nominal bore dia. |
| 25 | P/F of stainless steel angle value with 15 mm nominal bore dia. |
| 26 | Add for pvc manhole cover 1'6\\" x1'6\\" including fixing in slab ect complete job. |
| 27 | Signboard,documentation and photographic charges AND UNFORESEEN ITEMs Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender