Tender For Renovation Of Bachelor Accommodation At Kamorta In Nancowry Group Of Island .
Tender Value
10.63 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
1 days left
EMD
21269
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Bachelor Accommodation At Kamorta In Nancowry Group Of Island .
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges, hips valleys and gutters etc., conveying and stacking the materials with in a lead of 500m including removing L hooks washers etc complete. |
| 2 | Dismantling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. |
| 3 | Plastering with cement mortar in 12 mm thick with 1:4 (one cement four sand) cement mortar as directed by the EIC, including cost of cement, mainland river sand, all labour charges, transportation charges of all materials to work site, scaffolding charges, cost of minor tools and plants, GST, labour welfare cess etc. complete. |
| 4 | Providing and fixing solid PVC panelled door of ISI mark of approved brand with 3mm thick and frame provided with 5mm thick PVC, including cost of all materials, all fittings, all labour charges, transportation charges and minor tools, GST, labour welfare cess etc. complete. |
| 5 | Providing and fixing 6mm thick design Occanic sheet ceiling of everest or equivalent make of size 610mm x 610 mm etc. In the aluminium framed ceiling (frame work to be paid separately) including cost of occianic sheet, all labour charges transportation charges, minor tools, GST, labour welfare cess etc. complete. |
| 6 | Providing and fixing anodised aluminium work ( with minimum 15 micron uniform anodic coating ) consisting of tee/angle section , of approved make conforming to IS;733 in frames of false ceiling including aluminium angle, cleats with necessary C.P. brass/stainless steel sunk screws aluminium perimeter angles fixed to wall with rawl plugs @ 450mm centre to centre and fixing the frame work to level adjusting angles (6mm dia M.S rods) with necessary cadminum plated machine screws all complete as per approved architectural drawings and direction of the EIC (level adjusting angles , ceiling cleats and expension hold fastner to be paid for separately). Including cost of aluminium extrudes and fittings, all labour charges transportation charges, minor tools, GST, labour welfare cess etc. complete. |
| 7 | Providing and fixing Ist quality Vitreous Floor tiles (300 x 300 mm, thickness to be specified by the manufacturer) of approved make like laid on 20mmm thick bed of cement mortar 1:4 (1 Cement, 4 mainland river sand) including pointing the joint with white cement and matching pigment, including cost of cement, river sand from mainland, vitreous floor tiles all transportation cost upto site , labour charges minor tools, GST, labour welfare cess etc. complete. |
| 8 | Providing and fixing Ist quality Vitreous wall tiles (20 x 30 mm), thickness to be specified by the manufacturer) of approved make like laid on 20mmm thick bed of cement mortar 1:4 (1 Cement, 4 mainland river sand) including pointing the joint with white cement and matching pigment including cost cement, river sand from mainland, vitreous wall tiles all transportation cost upto site, labour charges minor tools, GST, labour welfare cess etc. complete. |
| 9 | Providing and laying PCC of Specified grade excluding the cost of centering and shuttering- All works up to plinth level and including the cost of all labour charges and transportation charges of all materials to work site cost of minor tools, GST labour cess etc complete. 1:2:4 (1 cement , 2 mainland river sand , 4 grade stone aggregate 20 mm nominal size from mainland quarry) |
| 10 | Providing wood work (Superior Harwood Category II) in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position, all labour charges, transportation charges of all materials to work site, scaffolding charges, cost of minor tools and plants, GST, labour welfare cess etc. complete. |
| 11 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clestory windows (Area of opening for panel inserts excluding portions inside grooves or rebates to be measured).Panelled or panelled and glazed shutters 25mm to 40mm thick. Including cost of timber, all labour charges, minor tools, GST, labour welfare cess etc., complete. |
| 12 | Providing and fixing Aluminium Handle 100 mm ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws, GST, labour welfare cess etc. complete. |
| 13 | Providing and fixing Aluminium tower bolt ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws including cost of all fittings, labour charges, minor tools, GST, labour welfare cess etc. complete. 200x10 mm |
| 14 | Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted special shaped washer. Including all labour charges, transportation charges, minor tools, labour welfare cess, GST etc. complete. |
| 15 | Providing and fixing pre-coated galvanized iron profile sheets (size, shape, and pitch of corrugation as approved by Engineer-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 mtr or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, all labour charges, minor tools, labour welfare charges, all transportation charges & GST etc., complete |
| 16 | Providing and fixing pre-coated galvanized iron profile steel sheets roofing accessories 0.40mm (+0.05%) total coated thickness with zinc coating120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete, all labour charges, minor tools, labour welfare charges, all transportation charges & GST etc., complete cess etc. complete.a) Ridges plain (500-600mm) |
| 17 | Providing and fixing of eaves or facia board with Everst Heavy Duty Board / Endura Board or equivalent (Non - Asbestors fiber cement board) of 12 mm thick 30 cm wide etc., as per the direction of EIC, including cost of board, nails / screws, GST, labour welfare cess etc., complete. |
| 18 | Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285, anodised transparent or dyed to required shade according to IS 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws of with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and skles with required PVC / neoprene felt etc.. aluminium sections shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium strap beading for glazing / pannelling, CP brass / stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge (Galzing and panneling to be paid for separately for Fixed Portion), including cost of all materials, transportation charges, all labour charges and minor tools, GST, labour welfare cess etc., complete. |
| 19 | Providing and fixing glazing in aluminium door, window ventilator, shutters and partitions etc. with PVC neoprene gasket etc. complete as per the architectural drawings and the direction of EIC (cost of aluminium snap beading shall be paid in basic item). With glass panes of 5 mm thickness (weight not less than 10.00 Kg/Sqm). Including cost of all materials, all labour charges, transportation charges of all materials to work site and minor tools, GST, labour welfare cess etc. complete. |
| 20 | Painting with two two coat of antifungal exterior emulsion paint of approved brand and one coat of cement primer on new surface to give an even shade including cost of cement primer & antifungal exterior emulsion of standard manufacturer, paint, brush, cost of other materials, scaffolding arrangements, labour charges, transportation charges of all materials to work site and cost of minor tools, GST, labour welfare cess etc. complete. |
| 21 | Distempering with 1st quality distemper (ready mix) having VOC content less than 50 grams/ltr of approved brand and manufacturing to give an even shade as per the direction of EIC, including cost of paint, brush and other materials, all labour charges, GST, labour welfare cess, minor tools etc complete. old work (one or more coat) |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the direction of EIC, including cost of paint, brush & other materials, all labour charges, GST, labour welfare cess etc. complete. |
| 23 | Providing and fixing wash basin with single hole pillow tap with C.I. or M.S. Brackets of approved make like Jaguar or equivalent make, of ISI quality including cost of all other materials, all labour charges minor tools etc. transportation charges of all materials to work site, GST, labour welfare cess etc. complete.Jaguar or equivalent Flat back wash basin size 630x450 mm with a pair of 15 mm CP brass pillar taps. |
| 24 | Providing and fixing 1000 Lit capacity HDPE water storage tank at the roof level of the building cost of the tank and brackets, cost of tank and brackets, cost of all other materials, all labour charges for installation of minor tools, transportation charges of all fittings, all labour charges minor tools, GST, labour welfare cess etc. complete. |
| 25 | Providing and fixing on wall face un plasticised, PVC pipe of ISI mark conforming to IS 4985(working pressure 4 kgf per sqcm) from WC to inspection chamber including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion as per the directions of EIC, including cost of PVC pipe all labour charges minor tools, GST, labour welfare cess etc. complete. (110mm Dia) |
| 26 | Fabrication and fixing of MS flat for wind ties over roof with GI 'L' hooks and washer as directed by EIC including cost of MS flat 40 x6mm cost of all other material all labour charges and transportation charges, minor tools, labour cess and GST etc complete |
| 27 | Providing and fixing GI pipes union in existing GI fittings and clamps i/c cutting and making good the walls the walls etc internal works - exposed on wall |
| 28 | 50mm dia nominal bore |
| 29 | 25mm dia nominal bore |
| 30 | 15mm dia nominal bore |
| 31 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid |
| 32 | Providing and fixing brass bib cock of approved quality, including Labour welfare cess, GST etc, complete.. 15mm nominal bore. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender