Tender For Procurement Of Opacity/Dust Analyzer For Measurement Of Dust Concentration (Mg/Nm3) In Flue Gases At Stack Emission Of Ph-Iv Stps Sarni

Sharing tender

Tender for Procurement Of Opacity/Dust Analyzer For Measurement Of Dust Concentration (Mg/Nm3) In Flue Gases At Stack Emission Of Ph-Iv Stps Sarni , Opacity/Dust Analyzer For Measuring Of Dust Concentration (Mg/Nm3) In Flue Gases At Stack Emission • Measurement- Opacity/Dust Density With Trans-Receivers. • Type- Non Extractive, In-Situ Non-Contact, Trans-Receivers, Cross Duet Type • Principle- High Intensity Red Led Transmission & Absorption. • Range- 0-999 Mg/M3, 0-999 Mg/Nm3, 0-3.0 Extinction, 0-100% Opacity, 0-5 Ringlemann (V) • Normalization- Accept Analog, Serial, Keypad Input For Temperature, Pressure, Moisture And Oxygen Correction. • Features- Automatic Lens Contamination Correction And Dynamic Misalignment Check. • Response Time- Less Than 05 Sec. • Accuracy- ±0.2% • Resolution- ±0.1% • Drift- Less Than 1% • Linearity- ±0.1% • Repeatability- ±0.1% Opacity • Averaging- Selectable From 10 Second To 30 Days • Path Length- 0.5 Mtr To 15 Mtr, Duct Size • Calibration- Automatic And Manual Mode Along With Periodically Zero And Span Calibration. • Power Supply- 88-265 Vac, 50 Hz • Construction- Greater Or Equals To Ip 65 • Flue Gas Temperature- Up To 250 Deg. C • Window Protection- Automatic Pneumatic Operated Fail-Safe Shutter On Both Trans-Receivers. , Bare Minimum Necessary Mandatory Spares For Routine Maintenance Of Opacity/Dust Analyzer • Mother Board Assembly With Press Fit Stud- 01 No. • M4x12 Spacer Stud, M3x16l Anchor Mini- 01 No. • Dcem2100a, Main Processor Pcb Assembly- 01 No. • Dcem2100a, 10 Interface Pcb Assembly- 01 No • Dcem2100a, Display Pcb Assembled With Lcd Module- 01 No • Dcem2100a, Power Supply, Operating Voltage 90-264 Vac- 1 No. • 2 Lens With O-Ring- 1 No. • Led Source, Detector Carrier, Mirror Holder, Reflector Glass, Fail Safe Shutter With Detector Card And Led Card- 1 No