Tender For Boring And Installation Of 300 Mtr Deep Tubewell With Submersible Pump And Rising Main At Industrial Focal Point, Mandigobindgarh
Tender Value
39.10 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
6 days left
EMD
78500
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fatehgarh Sahib → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Boring And Installation Of 300 Mtr Deep Tubewell With Submersible Pump And Rising Main At Industrial Focal Point, Mandigobindgarh
BOQ
| Sl. No. | Item Description |
| 1 | Excavation by mechanincal means (JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals, providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect |
| 2 | a) Earth work upto 1.5m Depth for |
| 3 | (i) All classes of soil except rocky. |
| 4 | Providing, Stringing out, cutting, Jointing and testing of ISI marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage. |
| 5 | B) D.I. Pipes as per IS 8329 DI-K9 |
| 6 | (c) 150mm i/d pipe line laid complete. |
| 7 | Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects. |
| 8 | a) D.I. specials upto 300mm i/d |
| 9 | Providing & fixing C.I./D.I. Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bots & insertion sheet, all carriage complete (with the approval of Engineer-in-charge). |
| 10 | (A) Class PN-1 as per ISI |
| 11 | (c) 150mm i/d Sluice Valves Socketted or Flanged |
| 12 | Providing & fixing single air valve ISI marked as per IS 14845 including jointing, cost of nut bolts and rubber insertion all carriages complete |
| 13 | (d) C.I. Single Air Valve screwed (Size 50 mm) |
| 14 | Construction of masonary Sluice Valve Chamber including sluice valve and excluding Sluice valve cover as per standard design and drawing of Public Health Department. |
| 15 | (b) Size 0.9 m. x 0.9 m. |
| 16 | Providing and fixing S.S Pressure Gauge complete as required complete in all respect. |
| 17 | a )Dial diameter 100mm calibration 0-16 Kg |
| 18 | Providing, fixing and jointing Cast Iron surface box for Sluice Valve, Air Valve, Fire Hydrant etc including all carriages complete |
| 19 | PUMPING MACHINERY |
| 20 | Supply ,errection ,testing and commissioning of electrically driven ,water lubricated submercible pumping set capable of diverting 1.00 lakh LPH of water per hour against a hesd of 250 feet coupled with elecric motor of 40-41 BHP confirming to IS 8034-1976 with N.R.V. complete in all respect including all (civil, electical & mechanical)works related thereof for tubewell.(Make of pump should be KSB Model No. BPHP333/6-41HP or equivalent of KIRLOSKAR/CROMPTON as approved by the Engineer in-charge) .with the following specifications: |
| 21 | Pump :- Submercible puping set shall be manufactured in accordance with IS:8034/1976 with up to date ammendments .It shall be centrifugal multistage pump having bronze impeller ,dynamically balanced to ensure cavitation and hunting free performance The bowl shall be of cast iron and shall be capable of withstanding hydrostatic pressure equal to twice the pressure at duty point or 1.5 times the shut off whichever is higher .Bowa assembly shall be with adopter piece .The impeller shaft should be of stainless steel and guided with bearing provided with suction case along with strainer. |
| 22 | Motors:- The motor shall be totally enclosed squirrel cage induction electric motor and shall be provided with thrust bearing to withstand wt. of all rotating parts and hydraulic thrust .The motor shall be provided with suitable device tomake care of expansion & contraction of lubricating water inside the motor. The winding of motor shall be acessible to hand after dismantling motor for repair if required.It shall be capable of 400V +7.5% 3 phase 50cycle AC Supply running 41 BHP of motor @2900 RPM.The motor shall be properly sealed so as not to allow any part of liquidnto enrer into it from either side of the motor shaft. |
| 23 | Column pipes :-Providing and fixing 100 mm dia E.R.W. type column pipe with clamps.Both ends of the pipe shall be screwed & fitted with steel flanges sealed after screwing with the pipes.The flanges shall confirm to BS-10/1962 table D.The thickness of column pipe shall be of class B& confirming to IS1239 with upto date amendments. Suitable increaser shall be provided with the pump.Internal dia of pipe shall be 1\\" more than the outlet size of pump. Flanges should be suitable for submercible pumping set including the cost of joints rubber inserttion nuts, bolts & washers etc. complete in all respects. Providing and fixing M.S. girder frames 6' long (ISMB 250x125x12 mm)and M.S. bed plate 12 mm thick of size 28\\"x28\\" for bore well complete in all respects. |
| 24 | Panel Board:- Panel Board having size 900 mmx750 mmx250 mm made of prestressed cold rolled sheet (2 mm th.) and autoclaved painted .The board should comprise of rigid welded structural frames made of structural steel section of not less than 3 mm thickness .The board should be smoothly finished & free from flaws. It should have space for providing power meter.The panel board should have the following flush mounted instruments. Panel Board 40 HP MUG40 Smart Starter (Make L&T) (rate should include of all the Following items from 11.01 to 11.09:- |
| 25 | Starter :- To control the motor automatic push button ,air break star-delta starter suitable for 41 BHP motor having an adjustable delay relay for automatic change from star to delta in upto 20 seconds ,three phase, thermal over load relays ,tripping 7reset device should be provided .The starter shall be of L & T make & shall be suitable for voltage range of 350-415 V.Rating of starter shall be 1.25 times the rating pf motor =1 No |
| 26 | Moulded Case Circuit Breaker (MCCB):-MCCB of 100 Amp. For required load with adjustable thermal over load relays of suitable rating and thermal over load relays of suitable rating and magnetic relay fixed at 100 Ampere.However the MCCB should be able to 5 KV short circuit current=1 no.(Make :L &T ,Crompton/havells/GE.) |
| 27 | Ammeter 0-100 Amp.:- Ammeter 0-100 Amp. Range 4\\" x 4\\" size, operated &shall be of high quality industrial 'A' grade confir-ming to latest relevent I.S. specifications=1 no. (Make AE/Motwage /havells/Yule.)Selector switch for voltmeter shall be of Sulzer/Katcee/L7T make.=1 no Selector switch for ammeter shall be of Sulzer/Katcee/L7T make.=1 no |
| 28 | Voltmeter 0-500 Volts :- Voltmeter 0-100 Amp. Range 4\\" x 4\\" size, of suitable range& shall be of high quality industrial 'A' grade confirming to latest relevent I.S. specifications=1 no.(Make AE/Motwage /havells/Yule.) |
| 29 | Single Phase preventer: Single phase preventer suitable for checking the negative sequence having built in time relay upto 40 seconds so that this may not trip while starting on load .Rating of C T's if required may also be indicated/provided.=1 set ( Make L & T/Crompton /Yule/Minille)Switch fuse unit of 100 Amp. Rating shall be of make L&T/LK or its equivalent makes=1 set Indicating lamps (R.Y.B.) shall be of ESS/BEE/Concord make =1 set Thimbles of make Dowell/Crompton=L.S. as reqd. HRC Fuse unit of 100 Amp. Rating with fuse basis shall be of L & T/GE/SIEMENS/ Havells make=3 set Terminal strips =3.no |
| 30 | Wiring in PVC insulated copper conductor cable Power capacitor left bare (unsheatherd) of size 6 mm square with copper thimbles and wire clips ( ISI ) marked as required as per site=1 no.(Make:Finolex/National/Plaza) Time switch of suitable rating for fully automatic start/off central as per time adjustment of L&T of 63 ampere rating with sensitivity of LK or its equivalent makes=1 no. (Make :-Gutts/Bentex/Havells Voltage balacing relay (electronic type) with Sheet metal/iron clad tripple protection to reverse rotating =1 no. (Make:L&T/SIEMENS/A.B.B.) |
| 31 | Shunt Capacitor:-of 9KVARin 515/440 volts oil immersed,self healing,dust proof,hermetically sealed with special epoxy confirming to I.S.2834 duly ISI as per PSEB requirement=1 no. (Make :-Crompton greeves/ Power cap/GEC/Shakti/Standard. |
| 32 | E.L.C.B. 300 m.a. =1 no. |
| 33 | Main Switch :- pole switch with neutral link of 100 ampere 415 volts =1 no. (Make:L&T/ASSCO/M.K./SSK) |
| 34 | Cable &Clamps :-Supply &fixing ofsubmercible cable of 16 mm sq.capacity ,3 core copper conductor. It shall also have required no. of clamps as per requirement of site, coplete in all respects. 9Make:- Finolex/Gloster/National) |
| 35 | Lowerin Clamps:- Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect. |
| 36 | Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) and with G.I. reducing socket including erection of the same, 10.50 metre (34.44 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 14 metre in length (including boring & refilling). a) Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 14Metre in length) |
| 37 | Drilling of 650mm dia bore with Reverse Rotatry Ring in all kinds of soil including the cost consumable stores, fuel oil and transportation of ring to the site. Complete in all respect. |
| 38 | Drilling of 650 mm dia bore with Reverse Rotatry Ring Upto 150 m depth BGL. |
| 39 | Drilling of 650mm dia bore with Reverse Rotatry Ring Beyond 150 m depth up to 300 Mtr |
| 40 | Supplying, lowering of MS as per IS: 4270-2001 including MS sockets having dimensions as per IS code of duly welded with MS electrode to have extra strength to lower the pipe into tube well bore complete in all respect. |
| 41 | 200 mm nominal diamente( weight 41.6 Kg per metre) 8.0 mm thickness |
| 42 | 300 mm nominal diameter ( weight 62.3 kg per metre ) 8.00 mm thickness. |
| 43 | Supplying, lowering of stainless Steel Cage type wire wound screen as per IS: 8110-2000 or latest with SS socket to connect Strainer Duly welded with suitable grade S.S welding electrode to lower the strainer into tubewell bore. |
| 44 | 200 mm nominal size dia. (slot size .75) 8.00 mm thick |
| 45 | Supplying at site of gravel of 1/16\\" to 1/8\\" sizes including pouring and packing in the annular space between the pipes assembly and the bore. The gravel should be free from dust, dirt or the vegetable manner as per IS 4097/1967 with latest amendments (to be paid as per actual length of pipe). |
| 46 | Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. |
| 47 | Capacity of Air compressor 300 cfm at 250 PSI |
| 48 | Development and Stabilizing of the tubewell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. |
| 49 | Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect. |
| 50 | 200 mm internal diameter |
| 51 | Supplying & fixing of M.S Clamp of size 150mm x 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect. |
| 52 | Supplying & Fixing of M.S pipe bail plug suitable for 200mm dia UPVC casing pipe having thickness of socket as 12mm, length 100mm & base plate of 8mm thick complete in all respect. |
| 53 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). |
| 54 | Class PN-1.6 as per ISI |
| 55 | 80mm i/d Sluice Valves flanged |
| 56 | Providing & fixing Dual plate check valve flanged end class PN-1.6 as per IS with nitrile seat SS shaft & springs in pipe lines including jointing & cost of Nut Bolt, rubber insertion etc. complete. |
| 57 | 80mm i/d check valve |
| 58 | Supplying, lowering & fixing of M.S special socket to connect S.S strainer to M.S pipe duly welded with suitable grade welding electrode complete in all respect. |
| 59 | 300 mm internal diameter |
| 60 | Making electric logging of borehole with electronic well logger including cost of equipment at site etc. in all complete respect. |
| 61 | Supplying and fixing mild steel centring guides made of 32mm x 6mm thick M.S bar complete in all respects. |
| 62 | Supplying at site wooden box of suitable size with lid & locking arrangement for preserving strata sample collected from bore. |
| 63 | Supplying, fixing and testing at site Automatic electronic typewater level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible/monoblock to be fixed on existing panel for OHSRs complete in all respects. |
| 64 | Providing and fixing M.S taper/ reducer made out of 6mm thick M.S sheet complete in all respect. |
| 65 | Reducer 300mm x 200mm |
| 66 | Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic,lead, mercury, pesticide etc. |
| 67 | Making temporary water supply arrangement for drilling of tubewell with reverse rotary rig till completion of bore and packing of gravel |
| 68 | Depth of temporary bore upto 90m |
| 69 | Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m. |
| 70 | Collection of water sample from different strata and testing of sample from approved laboratory (Phisical & chemical Analysis) |
| 71 | Supplying, Fixing & lowering of Stainless Steel Socket as per IS:8110-2000 or latest ISI marked Duly welded with suitablegrade S.S welding electrode.to lower the strainer into tubewell bore complete in all respect. |
| 72 | 200mm internal dia meter Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender