Tender For Providing Sewerage Facility To New Bilaspur Town In Tehsil Sadar District Bilaspur (Sh: Providing Laying Jointing And Testing Of Di Pipe Line 150Mm Dia (K-7) And Construction Of 4 Nos Manhole Chamber Near Kala Baba Kutia, Hanuman Temple Un
Tender Value
4.77 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
2 days left
EMD
9550
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bilaspur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Sewerage Facility To New Bilaspur Town In Tehsil Sadar District Bilaspur (Sh: Providing Laying Jointing And Testing Of Di Pipe Line 150Mm Dia (K-7) And Construction Of 4 Nos Manhole Chamber Near Kala Baba Kutia, Hanuman Temple Under Dmft).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work in soft/hard rock, chiseling wedging out of rock where blasting in prohibited saturated soil including bailing / pumping out of water, stacking the excavated soil in all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm layers, when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then deposing of all surplus excavated earth as directed within all leads and lifts. |
| 2 | Providing laying jointing and testing of Ductile iron pipe with double strength joints as per IS: 8329-2000 of wall thickness of 5 mm in a random length of 5.50 mtr class- K7 complete in all respect excluding earth work in trenches with in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. 150mm dia. |
| 3 | Providing and laying cement concrete 1:4:8 (1cement: 4sand: 8 graded stone agg. 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 4 | Brick work using common burnt clay building bricks in super structure above plinth level upto floor two level 2nd class bricks cement motar 1:4 (1cement: 4sand) in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 5 | Providing and laying cement concrete 1:2:4 (1cement: 2sand: 4 graded stone agg 20mm nominal size) and curing complete excluding the cost of form work in foundation and plinth ( channel and foundation plinth) |
| 6 | 15 mm thick cement plaster in single coat of fair side of brick/concrete /stone interior plastering upto floor two level including arises internal rounded angles chamfers and / or round angles not exceeding 80mm in girth and finished and smooth in CM 1:3 (1cement: 3sand) and to the entire satisfaction of the Engineer-in-charge with in all leads and lifts |
| 7 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor two ceiling not exceeding 4 mtr and removal of the same for in-situ reinforced concrete and plain concrete working:- |
| 8 | Flat surfaces such as soffits of suspended floor landings and the like up to 200mm thickness and to the entire satisfaction of the Engineer-in-charge. |
| 9 | Edges of slabs and breaks in floor and walls (under 20cmt wide) in all leads and lifts and to the enitre satisfaction of the Engineer-in-charge. |
| 10 | Providing and laying cement concrete 1:1.5:3 (1cement: 1.5 sand:3 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :- |
| 11 | Suspended floor roofs landing shelves and their supports balconies, beams girders bressumers and cantilevers up to floor two level. |
| 12 | Providing laying of tor steel reinforcement for RCC work including bending binding cutting and placing in position complete in all depths and heights and to the entire satisfaction of the Engineer-in-charge. |
| 13 | Providing and fixing precast SFRC manhole cover and frame of internal size 500mm diamter medium class in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender