Tender For Special Repair For Non Residential Building Govt. Sr. Sec. School, Manimajra (Town), Govt. Model High School (Near Dhillon Complex), Govt. Middle School (Indira Colony), Govt. High School Pocket No.4 & 5 (Now 8) In Manimajra, Govt. Primary
Tender Value
13.06 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
0 days left
EMD
26133
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair For Non Residential Building Govt. Sr. Sec. School, Manimajra (Town), Govt. Model High School (Near Dhillon Complex), Govt. Middle School (Indira Colony), Govt. High School Pocket No.4 & 5 (Now 8) In Manimajra, Govt. Primary School, Manimajra (Pocket No.1), Chandigarh Under The Control Of Sde Construction Sub Division No.1 For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. DSR 15.7 |
| 2 | In cement mortar DSR 15.7.4 |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4 |
| 4 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 5 | Dismantling tile work in walls laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm .Based on DSR.15.23.1 NS |
| 6 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31 |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: DSR 9.21 |
| 8 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR 9.21.1 |
| 9 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. DSR 9.84 |
| 10 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 9.96.1 300x16 mm each 257.15 9.96.2 250x16 mm DSR 9.96 |
| 11 | 250 X 16 mm DSR 9.96.2 |
| 12 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete DSR 9.97 |
| 13 | 200x10 mm DSR 9.97.3 |
| 14 | 150x10 mm DSR 9.97.4 |
| 15 | 100x10 mm DSR 9.97.5 |
| 16 | Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : DSR 9.100 |
| 17 | 125 mm DSR 9.100.1 |
| 18 | 100 mm DSR 9.100.2 |
| 19 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. DSR 10.25 |
| 20 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR 10.25.2 |
| 21 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead DSR 15.25 |
| 22 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : DSR 11.26 |
| 23 | 25 mm thick DSR 11.26.1 |
| 24 | 12 mm cement plaster of mix : DSR 13.1 |
| 25 | 1:4 (1 cement: 4 fine sand) DSR 13.1.1 |
| 26 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. DSR 13.21 |
| 27 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty DSR 14.5 |
| 28 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) DSR 14.5.1 |
| 29 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 15.56 |
| 30 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. DSR 16.83 |
| 31 | Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in-charge. (Old CC paver blocks shall be supplied by the department free of cost). DSR 16.84 |
| 32 | Providing and fixing 19mm thick (ISI) Commericial Board shutter in existing cup board, lipped with hard wood lipping of 19mm x 6mm on exposed edges including nail, screw and fevicol etc. the rate also included the cost of two coats of special quality over one coat of wooden primer after preparation of ply wood surfaces fixed in position complete in all respect to the entire satisfaction of Enginner in charge. NS |
| 33 | Providing and fixing 35mm thick Golden Champ wire gauge door shutter consisting of 100mm x 35mm style and top rail 150mm x 35mm lock rail 200mm x 35mm bottom rail wire mesh 22 x 12mm gauge fixed with 1/2\\" x 3/4” hollock wood beading 3nos 5” Nos hinges aluminium fitting and two nos handles 5” and 1 no tower bolt 8”, 6” and double rubber aluminium door stopper, Single action door spring. Complete fixed in position including the cost of two coats of special quality over one coat of wood primer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. NS |
| 34 | Providing and fixing 35 mm thick Golden Champ wire gauge window shutter with style and 75mm thick wide rails and 12 x 22 gauge wire mesh fixed with 1/2'' x 3/4'' corner beading and including the 2 Nos. of 4'' iron hinges ISI marked aluminium, tower bolt handle etc. The rate also including two coats of special qualtiy paint over one coat of primer complete in complete in all respect and to the entire satisfaction of Engineer-in-charge. NS |
| 35 | Providing and fixing 35 mm thick Golden Champ (kiln seasones) glazed window shutter with 75mm thick wide styles and top and bottom rails. the rate includes the cost of 4mm glass panes fixed with 3/4'' x 3/4'' Hollock wood corner beading 2 Nos. Aluminium belt and Aluminium D-type handle 4\\" size the window shutter to be painted with two coats of special quality paint over one coat of primer complete in all respect and to the entire satisfaction of Engineer-in-charge. NS |
| 36 | Providing water proofing treatment by laying one coat to cement adhesive (tape crete) mixed with cement in the ratio of 1:3 (one part of adhesive and three part of cement complete in all respect to the entire specification of Engineer-in-charges. NS |
| 37 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm pressed, mild steel welded or rigidly fixed together by mechanical means as specified and painting with approved quality of synthetic enamel paint over a coat of approved steel primer, after pre-treatment of the surface. The rate further include making of khudda for holdfasts, Cement concrete 1:2:4 for holdfast, repair and making good of damaged plaster/ windowedges, including distempering/smowcem to the repaired portion matching with the existing shade as directed by Engineer-in-charge: Based on DSR 10.14 NS |
| 38 | Extra for centre mullion in pressed steel door frame confirming to IS 4351 manufactured from mild steel sheet of 1.60mm thickness of section (125mmx60mm) rigidly fixed together by mechnical means including painting with approved quality of synthetic enamel paint over a coat of approved steel primer, complete in all respects to the entire satisfaction of Engineer-in-charge. NS |
| 39 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 15.60 |
| 40 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : DSR 5.2 |
| 41 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu- ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.2.2 |
| 42 | Centering and shuttering including strutting, propping etc. and removal of form for DSR 5.9 |
| 43 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. DSR 5.9.2 |
| 44 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. DSR 5.22A |
| 45 | Providing and fixing sheet covering over expansion joints with iron screws as per design. DSR 5.22A |
| 46 | Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR 5.22A.6 |
| 47 | Providing and fixing sheet covering over expansion joints with iron screws as per design. DSR 5.29 |
| 48 | Aluminium fluted strips 3.15 mm thick. DSR 5.29.2 |
| 49 | 200 mm wide DSR 5.29.2.2 |
| 50 | Providing and fixing wire mesh 12 x 22 gauge over existing chowkhat or wire mesh shutter including the cost of hard wood beading including the cost of nails, putty etc. complete in all respect to the entire satisfaction of Engineer-in-Charge. NS |
| 51 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. DSR 12.41 |
| 52 | 110 mm diameter DSR 12.41.2 |
| 53 | Credit of old dismantled wooden Door 300/- each |
| 54 | Credit of old dismantled wooden chawkhats 250/- each |
| 55 | Credit of old dismantled brick bats 650 per cum Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender