Tender For Day To Day Maintenance And Petty B/R Repair To Certain Md/Otm Accn At Misa C Under Ge(S) Tezpur
Tender Value
40.90 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Day To Day Maintenance And Petty B/R Repair To Certain Md/Otm Accn At Misa C Under Ge(S) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each and keeping in safe custody for removing to store, complete all as specified and directed. |
| 2 | Taking down of shutters of any description n.exc 1.00 Sqm each and keeping in safe custody for removing to store, complete all as specified and directed. |
| 3 | Taking down chowkhats incl shutters (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each ,complete all as specified and directed. |
| 4 | Taking down chowkhats incl shutters (without taking off shutters from the frame) n exc 1.5 sqm ,complete all as specified and directed. |
| 5 | Taking down and Refixing Shutters of any description exc. 1.00 Sqm and not exc. 2.00 Sqm Each in the Same Opening after easing and adjusting complete all as specified and as directed. |
| 6 | Taking down and Refixing shutters of any description n exc 1.00 Sqm Each in the Same Opening after easing and adjusting complete all as specified and directed. |
| 7 | S & F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing,complete all as specified and directed. |
| 8 | S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed. |
| 9 | S&F Anodised aluminium frame for doors, windows, ventilators with Two or more Track including joining cleat for fixing etc. complete all as specified and directed |
| 10 | S&F Anodised aluminium window (two/three track) sliding type without sash bar and ventilator shutters ((lower type),aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and directed |
| 11 | S&F Anodised aluminium door shutter aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door , hinges ,anodised aluminium snap beading, screws etc.complete all as specified and directed. |
| 12 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 13 | S&F 100mm size MS/Stainless steel Butt hinges fixed with SS Screw complete all as specified and directed. |
| 14 | S&F Stainless Steel Butt hinge of size 75 mm fixed with SS Screw complete all as specified and directed. |
| 15 | S & F in repair Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, fixed to steel/wooden door complete all as specified and directed by engr in charge |
| 16 | S&F for extruded aluminium alloy handels fabricated type, anodised, 150mm long.complete all as specified and directed. |
| 17 | S&F in repairs extruded aluminium alloy handels fabricated type, anodised, 150mm long.complete all as specified and directed. |
| 18 | S&F in repair Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.complete all as specified and directed. |
| 19 | S&F aluminium anodised, barrel tower bolt of extruded section 150mm long ,complete all as specified and directed |
| 20 | S&F in repairs aluminium anodised, barrel tower bolt of extruded section 150 mm long,complete all as specified and directed |
| 21 | S&F aluminium anodised, barrel tower bolt of extruded section 200mm long ,complete all as specified and directed |
| 22 | M&L 2nd CL HW plain fillets square, rectangular in section clean sawnn sectional area exe 13 sqcm & n.exe 25 sqcm fixed with nails including dismantling and nessary painting with two coat of synthetic enamal paint over a coat of pink primer complete all as specified and directed. |
| 23 | M&L 2nd CL HW plain fillets square, rectangular in section clean sawnn sectional area exe 25 sqcm & n.exe 25 sqcm fixed with nails including dismantling and nessary painting with two coat of synthetic enamal paint over a coat of pink primer complete all as specified and directed. |
| 24 | S & F in repair Wire netting(bird mesh) of galvanised steel wire 0.71 mm dia 12 mm mesh size fixed with tinned tacks of wire staples complete all as specified and directed |
| 25 | Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed |
| 26 | S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 3mm dia single GI adjustable suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress Complete all as specified and directed. |
| 27 | S&F 6-10 mm thick PVC hollow panels with to 1.00mm thick plain PVC sheet suitably placed in Wall/ceilig inclding same and matching colour wall angle , u clip, end elip and jointer . As in ceiling and walls including Galuminium frame 0.50mm thick GI \\"C\\" channel @ 600 to 800mm c/c vertically and horizontally and at every corner As per specification and drawing complete all specified and directed by Engr-in-Charge. |
| 28 | Taking down cement plaster of any description on brick walls, concrete surface incl racking out joints, hacking key & scrubbing down with water,remove dust, debries/ rubbish, etc, complete all as specified and directed. |
| 29 | M&L 15mm thick plaster in CM (1:4) on Brick wall or concrete surfacees,finished even and fair without using extra cement, complete all as specified and directed. |
| 30 | M & L 10mm thick rendering in cm(1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement, complete all as specified and directed. |
| 31 | M & L 5mm thick rendering in cm(1:3) on concrete surfaces of ceiling etc,finished the surface even & smooth without using extra cement, complete all as specified and directed. |
| 32 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing coat), removing serviceable tiles to store and rubbish off the premesises,complete all as specified and directed. |
| 33 | M&L 25 mm thick,Cement concrete, type B-1, (1:2:4), 20 mm graded aggregate as in floor , sub base making finished even and rough to receive the topping layer as in sub base complete all as specified and as directed. |
| 34 | M&L Glazed vitrified tiles 8 to 10 mm thick (square/ rectangular) of any shade, polished, area of each tiles exceeding 0.42 but not exceeding 1.00 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 35 | M&L Glazed vitrified tiles 8 to 10 mm thick (square/ rectangular) light shade, polished, area of each tiles exceeding 0.42 sqm but not execeeding 1.00Sqm, in skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 36 | M&L for Machine cut kota stone slab flooring 16-18mm thick (size min 550 x550) laid and jointed with grey cement siurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite Finish Polishing )over 20mm thk cement screed base in CM 1:6 complete all as specified and directed. |
| 37 | M&L for Machine cut kota stone slab 16-18mm thick in riser of steps, skirting, dado over 20mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 38 | S&F for colour Glazed ceramic tiles (600x300) of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match,includin 10mm thick backing layer in cement mortar 1:4 complete all as specified and directed |
| 39 | M&L for Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed |
| 40 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4.complete all as specified and directed. |
| 41 | M&L 18-20mm thick Granite stone (of any type) work (table rubbed and polished) in cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed. |
| 42 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) for in skirting/border/wall (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 43 | M&L for Pavigree parking tiles heavy duty of any colour/ patern 40cm x 40cm x 7 to 10mm thick, set, jointed and pointed in neat cement siurry in floors with grey cement and pigments in floors and over 15mm thick screed bed in CM 1:4 for laying floor finishes. Make Jonson & equivelent |
| 44 | S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. Note: Cost of second class Hardwood Beading shall deemed to be including against Glazed and Skelton shutter. |
| 45 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 46 | S&F 4 mm thick frosted/ pin headed glass in ventilator shutters incl hacking out all glass anysize, quality or description from wooden/ metal frame works all as specified and directed by Engr-in-Charge |
| 47 | S/F 4.0mm thick sheet glass ordinary/tinted quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed. |
| 48 | S&F 4 mm thick sheet glass ordinary/tinted qualityincluding hacking out old broken glass any size,or description from wooden/ metal frame work and glazing with oil putty in square not exc 0.50 sqm in each pane for any type of window up to tripple story bldg complete all as specified and directed. |
| 49 | S & F in repair 100 mm long hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinhe plate and fixed with screw complete all as specified and directed. |
| 50 | S & F Continuous (piano) hinges, 30 mm width of flaps ,mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 51 | S&F as in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished bright finished complete all as specified and directed. |
| 52 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, with chromium plated brass screws and cup washers, including Taking down unserviceable mirror, complete all as specified and directed |
| 53 | Repair windwos like steel/wooden/aluminium by using wire mesh and easing windows shutter by using oil,greesing or cleaning cement morter or removing old rust, dust,mud etc make it good and smooth incl. one steel handle to openable in a normal process. Complete all as specifiesd and as directed |
| 54 | S&F in repair kitchen plate rack made out of stainless steel 0.60 mm thick sheet with partitions and size of rack 900mm X 850mm X 250mm with shape and pattern as per sample kept in sample room of GE Office complete all as specified and directed. |
| 55 | S&F as in repairs, plastic water closet seat, closed pattern with flat bottom and cover for water closet pan (padestan pattern) complete all as specified and directed. |
| 56 | S&F Tubular Towel rail chromium plated 600mm long 20mm dia D type with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 57 | S&F Chromium Plated soap dish fixed to wall with necessary fixing arrangement as in repair complete all as specified and directed. |
| 58 | Supply and fix,as in repair, 32/40 mm dia PTMT 610 mm long waste pipe suitable for WHB / Sink complete all as specified and directed. |
| 59 | Supply and fix,as in repairs, 75 mm dia of outlet PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 60 | S&F in repairs stainless steel grating round/ Square cockroach proof with or without hole 100/75mm dia complete all as specified and directed. |
| 61 | Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed. |
| 62 | Supply and fix,as in repair, CP 40mm dia waste coupling for stainless steel sink with inlet and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed. |
| 63 | S & F in repairs Health faucet/ Hand shower (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 64 | Supply and fix, as in repair,15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed. |
| 65 | S&F PVC connection 15mm size with PTMT nuts of length 450mm fixeed to 15mm GI pipe including necessary fixing arrangement as in repair complete all as specified and directed. |
| 66 | Supply & fix in repair 20 to 25mm dia anodised aluminium alloy curtain rod includig two Nos of socket/end bracket complete for doors/window opening complete all as specified and directed. |
| 67 | Cutting chases ,pinning ,making good to facing where required and painting in cement mortar 1:3 to ends or egdes of landings ,steps,cills ,sunshed,shelves,lintels etc and cutting chases for concealed water tubing etc inlcuding making good cutting shall n.exc 10 cm girth complete all as specified and directed. |
| 68 | S&F of Tubing 15mm Bore (dia),'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down complete all as specified and directed. |
| 69 | S&F of 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor including taking dowd ancomplete all as specified and directed, |
| 70 | Refixing 15mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) includeTaking up or down steel tubing and connections, including cleaning for refixing or removal to store |
| 71 | Refixing 20mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) includeTaking up or down steel tubing and connections, including cleaning for refixing or removal to store |
| 72 | S&F in repairs Vitreous China wash hand basin white 550 x 400 mm including CP waste coupling and PVC Waste pipe ,a pair of cast Iron Brackets duly painted including cutting and pinning in ends, making good disturbed surfaces in CM 1:3 including tacking dowd/out unserviceable Wash Hand Basin and connected items, complete all as specified and directed |
| 73 | S&F Swivel shower with shower arm 15mm size,195mm long with bend of 45 degree with flange of PTMT any colour as in repair complete all as specified and directed. |
| 74 | Supply and fix, as in repair, Overhead Shower 125 mm Round / Square Shape Single Flow (Chromium Plated) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore complete all as specified and direcetd. |
| 75 | Supply and fix, as in repair, bibtap standard of PTMT any colour screwed ISI marked, for iron pipe 15mm bore (minimum weight 90 gms) complete all as specified and directed. |
| 76 | Supply and fix, as in repair,15 mm stop valve of PTMT of any colour high pressure screwed ISI marked for iron pipe and fixed for 15 mm bore of pipe(minimum weight 90 gms) etc complete all as specified and directed. |
| 77 | Supply and fix Pillar taps fancy type 15mm bore of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 90gms) as in repair complete all as specified and directed.(ISI Marked) |
| 78 | S & F Angle Stop cock 15mm dia (bore), cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with wall flange screwed for Iron pipes or Brass Ferrule and fixed, complete all as specified and sirected. |
| 79 | S & F in repair 15mm Stop valves cast copper alloy with fancy type chromium plated with long shank and cup (Concealed Type) for iron pipe or for unions and fixed .complete all as specified and direceted. |
| 80 | Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with quarter turn handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 81 | S&F Pillar Tap 15mm bore, cast copper alloy, Fancy type, chromium plated, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. |
| 82 | S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with \\"p\\" or \\"s\\" trap front or back inlet including fixing Bolts with and (excluding 10 litre capacity low level Flushing Cistern) and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed. |
| 83 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding 1:2 complete all as specified and directed |
| 84 | S & F in repairs flush pipe of PVC 32 mm dia ,for low level flushing cistern to squatting pattern closet including all joints and making good to floor complete all as specified and directed. |
| 85 | S & F as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low high density or PVC 32 mm dia complete all as specified and directed. |
| 86 | S & F in repairs Gun metal or gate valves with iron wheel head ,screwd both ends for iron pipe and fixed complete in all respect as specified. |
| 87 | M&L for preparing new plastered surface of wall and applying three coats of white wash incl cornice complete all as specified and directed. |
| 88 | M&L for preparing new plastered surface of ceiling and applying two coats of white wash complete all as specified and directed. |
| 89 | M&L one coat of white wash on ceiling and cornices including preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed |
| 90 | M&L complete removal of existing treatment and Applying two coats of Acrylic Emulsion distember to old plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall complete all as specefied and directed. |
| 91 | M&L Applying two coat of acrylic distember to newly plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall complete all as specefied and directed. |
| 92 | M&L preparation of newely plaseter surfaces and appplying two coats of exterior emulsion weather coat(Apex) over two primer coats of damp shealth including 2 mm thick wall care putty to wall new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed. |
| 93 | M&L preparation of old plaster surfaces and appplying two coats of exterior emulsion weather coat(Apex) over two primer coats of damp shealth to old plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed. |
| 94 | M&L applying two coats of of exterior antifungus paint over a coat of primer a coat 2 mm thick wall care putty to wall including , including preparation of old wall surface complete all as specified and directed. |
| 95 | M&L Writing letters or figures(Block, Roman, Italic or Indian n.exc 30cm high complete all as specified and as directed.including necessary scaffolding or ladder complete all as specified and directed. |
| 96 | M&L for writing Stops, commas, short lines, dashes, hyphens, brackets, etc. Complete all as specified and as directed including necessary scaffolding or ladder complete all as specified and directed. |
| 97 | M&L preparing new steel surfaces and applying two coat of syntheitc enameled paint over a red oxide primer exc 10 cm width or grith, complete all as specified and directed. |
| 98 | S & F in repairs Aluminium (extruded section body type )door closer hydraulically regulated designation No 3, universal type , suitable for door shutter of 851 to 1000 mm in width and of weight and weight betwwen 61 to 80 kg ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed |
| 99 | S&F in repairs floor door stopper of aluminium alloy body 140mm and tongue, anodised, with hard drawn steel spring, fixed in floor overall length 150mm complete all as specified and directed |
| 100 | S&F, as in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 101 | Grubbing up tree trunk girth not exc 30 cm including cutting of trunk portion protuding over all surface / roof surface /terrace of building including necessary scaffolding and necessary safety measure if required and make good the surface in cement mortar (1:3) and applying one coat of required chemical as directed by engr in charge and removing of unserviceable material out side MD land and cleaning site complete all as specified and directed by Engineer-in-Charge |
| 102 | Demolition of brickwork or stone/boulder masonry, built in cement mortar complete all as specified and directed. |
| 103 | M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm complete all as specified and directed. |
| 104 | Dismantling Structural steel work includings door, gates, etc and similar works complete all as specified and directed. |
| 105 | Supply & Fix framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed |
| 106 | M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth without using extra cement as in plinth protections/path and laid fair in alternate bays n including filler joints with sealing compound grade 'A' where required complete all as specifed and as directed. |
| 107 | M&L for Old wall surface including properly including preparation/removal of existing loose paint surface and fillings the cracks with exterior wall care putty and applying one coat of weather coat water proofing paints of any shade on complete surfaces over a coats damp shield or equivalent over a coat of primer etc including single/ Double/Triple storied bldgs complete all as specified and as directed by Engineer-in-Charge. |
| 108 | S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in wood chowkhat complete all as per manufacturer instruction.complete all as specified and directed. |
| 109 | Taking down existing damaged water closet alongwith complete PCC from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of 150 micron polythene film / 3mm APP membrane, natural colour with cold cut back adhessive.(iii) Providing cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness. |
| 110 | S&F steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, donetailed or welded complete all as specified and directed. |
| 111 | S&F steel window with side hung shutter, including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 112 | Supply and fix, steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed |
| 113 | Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.complete all as specified and directed. |
| 114 | S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 115 | S&F Pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 116 | Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly complete all as specified and directed |
| 117 | M & L 15 mm thick in cement mortar (1:4) on existing roof surface true to level with WPC @3% of cement after applying cement slurry @3Kg/Sqm and applied coat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm complete all as specified and directed. |
| 118 | Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane complete all as specified and as directed. |
| 119 | S&F PVC (SWR) Soil, Waste and Ventilating Pipe 75mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 120 | S&F PVC (SWR) Bend 75mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 121 | S&F PVC (SWR) Branch Pieces 75mm bore (dia), Single (Single Y) equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 122 | S&F PVC (SWR) Junction 75mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed. |
| 123 | S&F Mortice lock, Brass, 4 Levers, vertical type, size 100 mm and fixed, complete all as specified and as directed. |
| 124 | S&F bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc complete all as specified and as directed |
| 125 | S & F in repairs wall mixer 3-in-1 CP 15 mm bore including 125 mm dia overhead shower, complete with 15 mm long bend pipe and wall flenge including making good wall surface complte all as specified and directed & approved by GE |
| 126 | S&F in repair 15mm bore two way bib cock cast copper alloy CP Fancy type ,with wall flange screwed down for iron pipe or union , complete all as specified and directed & approved by GE |
| 127 | S&F 6-10 mm thick PVC hollow panels with to 0.5 mm plain PVC sheet suitably placed in Wall inclding same and matching colour wall angle , u clip, end elip and jointer . As in ceiling and walls including aluminium frame work fixed to wall or wooden scantling vertically and horizontally at an interval complete all as specified and directed by Engr-in-Charge |
| 128 | NOTES:1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender