Tender For Comprehensive Maintenance Of Furniture Items Under Ge(I) Gos.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
63000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ganjam → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance Of Furniture Items Under Ge(I) Gos., 1 Old U/S Top 2 Old U/S Legs 3 Old U/S Front/Rear Rail. 4 Old U/S Side Rail 5 Old U/S Side Stiffner. 6 Old U/S Shelves. 7 Old U/S Centre Stiffner. 8 Old U/S Handle 9 Old U/S Shutter 10 Old U/S Drawers. 11 Old U/S Bottom Ply Of Drawer 12 Old U/S Back Side Ply Of Drawer 13 Old U/S Left/Right Side Ply Of Drawer 14 Old U/S Mirror S&F New Mirror 15 Old U/S Drawers 16 Old U/S Top 17 Old U/S Left/Right Side Board 18 Old U/S Back Side Ply 19 Old U/S Base/Leg 20 Old U/S Bottom 21 Old U/S Shutter 22 Old U/S Handle 23 Old U/S Channel 24 Old U/S Wheel 25 Old U/S Seat And Back Cushion 26 Old U/S Front Leg Of Chair Dining With Long Back 27 Old U/S Rear Leg Of Chair Dining With Long Back 28 Old U/S Side Rail Of Chair Dining With Long Back Old U/S Front Rail/Back Rail Of Chair Dining With Long Back 29 Old U/S Shoe Chair Dining With Long Back 30 Old U/S Plastic Cane Of Chair Easy 31 Old U/S Front Leg Of Chair Easy 32 Old U/S Rear Leg Of Chair Easy 34 33 Old U/S Seat Side Rail Of Chair Easy 35 Old U/S Front/Back Side Rail Of Chair Easy 36 Old U/S Back Rest Side Rail Of Chair Easy Old U/S Back Rest Lower/Upper Rail Of Chair Easy 37 Old U/S Stiffener Of Chair Easy 38 Old U/S Removing Of Old Damaged Arm Of Chair Easy 39 Old U/S Plastic Cane Of Chair Writing 40 Old U/S Of Any Type 41 Old U/S Front Leg Of Chair Writing 42 Old U/S Rear Leg Of Chair Writing 43 Old U/S Back Rest Rail Of Chair Writing 44 Old U/S Seat Front/Back Rail Of Chair Seat Side Rail Of Chair Writing 45 Writing 46 Old U/S Stiffener Of Chair Writing 47 Old U/S Hand Rest Of Chair Writing 48 Old U/S Pvc Sheet From Chair Dining Pvc Sheet 49 Old U/S Plastic Cane Of Dining Chair Of Any Type 50 Old U/S Front Leg Of Chair Dining 51 Old U/S Rear Leg Of Chair Dining 52 Old U/S Side Rail Of Chair Dining 53 Old U/S Front Rail Of Chair Dining 54 Old U/S Back Rest Of Chair Dining 55 Old U/S Stiffner Of Chair Dining Old U/S Seat And Back Rest Frame Of Chair Cb Steel With/Without Arms 56 Old U/S Hand Rest Of Chair Cb Steel With Arms 57 Old U/S U/S Top Cap And Pvc Toes 58 Old U/S Flat Iron 20 * 3Mm Thick 59 Old U/S Seat And Back Plastic Cane Of Chair Cb Special Steel 60 Old U/S Seat/ Back Rest Of Chair Cb Special 61 Old U/S Handle Of Chair Cb Special With Hand Rest 62 Old U/S Hand Rest Of Chair Cb Special 63 64 Old U/S Cane Of Chair Verandah Steel 65 Old U/S Seat & Back Pvc Sheet 66 Old U/S Flat Iron 20X3Mm Thick Nos 2 67 Old U/S Seat Cushion And Cover For Chair Dining 68 Old U/S Front Leg Of Chair Dining 69 Old U/S Rear Leg Of Chair Dining 70 Old U/S Side Rail Of Chair Dining 71 Old U/S Front Rail/Back Rail Of Chair Dining 72 Old U/S Ver Strips Of Chair Dining 73 Old U/S Stiffener Of Chair Dining 74 Old U/S Seat & Back Cushion And Ply Wood From Chair Easy Cushioned 75 Old U/S Front Leg 76 Old U/S Rear Leg. 77 Old U/S Side Rail. 78 Old U/S Front Rail. 79 Old U/S Rear Rail. 80 Old U/S Back Rest Rail. 81 Old U/S Stiffner. 82 Old U/S Arm Rest 83 Old U/S Front Leg 84 Old U/S Rear Leg. 85 Old U/S Side Rail. 86 Old U/S Front Rail. 87 Old U/S Rear Rail. 88 Old U/S Stiffner. 89 Old U/S Back Reast. 90 Old U/S Seat Of Ply Wood 91 Old U/S Bearer Of Sofa Set Four Seater 92 Old U/S Support To Back Frame Of Sofa Set Four Seater 93 Old U/S Arm Of Sofa Set Four Seater 94 Old U/S Side Rail Of Back Frame Of Sofa Set Four Seater 95 Old U/S Batten Of Sofa Set Four Seater Etc.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Aug-2026 | DATE | Date | 07-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Table Writing (Drg No FD-249, 268, 275) Removing old damaged top,S & F new Top of 18 mm thick MDF Board, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge. |
| 2 | Removing old damaged legs , S & F new legs of 35 x 55 mm thick as per existing shape and size, as per drg or directed by Engr-in-Charge. Drg No FD-249, 268, 275 |
| 3 | All as per item No 01 above but front/rear rail. |
| 4 | All as per item No 01 above but side rail |
| 5 | All as per item No 01 above but side stiffner. |
| 6 | All as per item No 01 above but shelves. |
| 7 | All as per item No 01 above but centre stiffner. |
| 8 | Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge. Drg No FD-249, 268, 275 . |
| 9 | Removing old damaged Shutter , S & F new Shutter made of 18 mm thick MDF board, as per existing shape and size,replaced unsv knobs, all as per drg or directed by Engr-in-Charge. Drg No FD-249, 268, 275 . |
| 10 | All as per item No 01 above but drawers. |
| 11 | Removing old damaged bottom ply of drawer , S & F new 6 mm thick bottom ply of drawer as per existing shape and size all as per drg or directed by Engr-in-Charge. . Drg No FD-249, 268, 275 |
| 12 | Removing old damaged back side ply of drawer , S & F new 12 mm thick back side ply of drawer as per existing shape and size all as per drg or directed by Engr-in-Charge. Drg No FD-249, 268, 275 . |
| 13 | Removing old damaged left/right side ply of drawer , S & F new 12 mm thick left/right side ply of drawer as per existing shape and size all as per drg or directed by Engr-in-Charge. Drg No FD-249, 268, 275 . |
| 14 | Table Dressing Ladies with Mirror (Drg No FD/E6/MAP/11) Removing of old damage mirror S&F new mirror of 5 to 5.5mm thick mirror as per drg or as directed by Engineer-In-Charge. |
| 15 | Removing of old damage drawers, S&F new drawer of as per drg or as directed by Engineer-In-Charge. Drg No FD/E6/MAP/11 |
| 16 | Removing of old damage Top S&F new Top of 18mm thick MDF board as per drg or as directed by Engineer-In-Charge.Drg No FD/E6/MAP/11 |
| 17 | Removing of old damage left/right side and centre protion S&F new left/right side & centre protion of 19 mm MDF board as per drg or as directed by Engineer-In-Charge. |
| 18 | Removing of old damage back side ply,S&F new back side Ply of 6 mm thick commmercial BWR quality, as per drg or as directed by Engineer-In-Charge. Drg No FD/E6/MAP/11 |
| 19 | Removing of old damage base/ leg , S&F new base/ leg as per drg or as directed by Engineer-In-Charge. Drg No FD/E6/MAP/11 |
| 20 | Removing of old damage bottom , S&F new bottom 18 mm thick MDF Board as per drg or as directed by Engineer-In-Charge. Drg No FD/E6/MAP/11 |
| 21 | Removing of old damage shutter S&F new 18 mm thick MDF Board shutter as per drg or as directed by Engineer-In-Charge. Drg No FD/E6/MAP/11 |
| 22 | Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge.Drg No FD/E6/MAP/11 |
| 23 | Removing old damage channel S&F New Telescopic channel stainless steel, all as specified shape, size, drg or as per directed by Engr-in-Charge.Drg No FD/E6/MAP/11 |
| 24 | Removing of damage old UNSV wheel S&F new wheel to stool revolving complete all as per specification or as directed Engr-in-Charge.Drg No FD/E6/MAP/11 |
| 25 | M&L for applying french wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.Drg No FD/E6/MAP/11 |
| 26 | Supply and Setting seat and back cushion 40 Kg/Cum density with 12 mm thick ply wood BWR grade phenol bonded covered with approved rexin cover for Chair Dining with long back by removing the existing worn out seat and back cushion for chair dining high back complete all as specified as shown drawing Note:- Rexin shall be Approved by GE. Drg No: FD-357 |
| 27 | Removing of old damaged front leg of Chair Dining with long back and S&F new front leg with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No: FD-357 |
| 28 | Removing of old damaged rear leg of Chair Dining with long back and S&F new rear leg with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No: FD-357 |
| 29 | Removing of old damaged side rail of Chair Dining with long back and S&F new side rail with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No: FD-357 |
| 30 | Removing of old damaged front rail /back rail of Chair Dining with long back and S&F new front rail with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No: FD-357 |
| 31 | Removing old damage Shoe Chair Dining with long back and S&F New pvc shoe of all as specified shape, size as per drg or as per directed by Engr-in-Charge. |
| 32 | M&L for applying french wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.Drg No: FD-357 |
| 33 | Removing unserviceable old plastic cane of Chair Easy of any type and S&F plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per Godrej pattern and polishing to frame work complete all as specified and as directed. Drg No:FD-229 |
| 34 | Removing of old damaged front leg of chair easy and S&F new front leg of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-229 |
| 35 | Removing of old damaged rear leg of chair easy and S&F new rear leg of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-229 |
| 36 | Removing of old damaged seat side rail of chair easy and S&F new seat side rail of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-229 |
| 37 | Removing of old damaged front/back side rail of chair easy and S&F new front/back side rail of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-229 |
| 38 | Removing of old damaged back rest side rail of chair easy and S&F new back rest side rail of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-229 |
| 39 | Removing of old damaged back rest lower/upper rail of chair easy and S&F new back rest lower/upper rail of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-229 |
| 40 | Removing of old damaged stiffener of chair easy and S&F new stiffener of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-229 |
| 41 | Removing of old damaged arm of chair easy and S&F new arm of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-229 |
| 42 | Removing unserviceable old plastic cane of Chair Writing of any type and S&F plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per Godrej pattern and polishing to frame work complete all as specified and as directed . Drg No: FD -280 |
| 43 | Removing of old damaged front leg of chair writing and S&F new front leg of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed.Drg No:FD-280 |
| 44 | Removing of old damaged rear leg of chair writing and S&F new rear leg of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed.Drg No:FD-280 |
| 45 | Removing of old damaged back rest rail of chair writing and S&F new back rest rail of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed.Drg No:FD-280 |
| 46 | Removing of old damaged seat side rail of chair writing and S&F new seat side rail of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed.Drg No:FD-280 |
| 47 | Removing of old damaged seat front/back rail of chair writing and S&F new seat front/back rail of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed.Drg No:FD-280 |
| 48 | Removing of old damaged stiffener of chair writing and S&F new stiffener of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed.Drg No:FD-280 |
| 49 | Removing of old damaged hand rest of chair writing and S&F new hand rest of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed.Drg No:FD-280 |
| 50 | Removing UNSV PVC sheet from Chair dining PVC Sheet (MAP) and S&F PVC sheet with suporting of 2x stiffener of bottom of PVC sheet, including provided hard PVC toe to each leg and polishing to Chair dining PVC Sheet (MAP) complete all as specified and as directed by Engr-in-Charge. . Drg No:,FD/MAP-II/05 |
| 51 | Removing unserviceable old plastic cane of Dining Chair of any type and S&F plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per Godrej pattern & provided hard PVC toe to each leg and polishing to frame work complete all as specified and as directed BY Engr-In- Charge. Drg No: FD-228, 203, 279 |
| 52 | Removing of old damaged front leg of chair dining and S&F new front leg with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-FD-228, 203, 279 ,FD/MAP-II/05 |
| 53 | Removing of old damaged rear leg of chair dining and S&F new rear leg with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-FD-228, 203, 279 ,FD/MAP-II/05 |
| 54 | Removing of old damaged side rail of chair dining and S&F new side rail with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-FD-228, 203, 279 ,FD/MAP-II/05) |
| 55 | Removing of old damaged front rail of chair dining and S&F new front rail with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-FD-228, 203, 279 ,FD/MAP-II/05 |
| 56 | Removing of old damaged Back Rest of chair dining and S&F new Back Rest with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-FD-228, 203, 279 ,FD/MAP-II/05 |
| 57 | Removing of old damaged Stiffner of chair dining and S&F new Stiffner with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No:FD-FD-228, 203, 279 ,FD/MAP-II/05) |
| 58 | Removing of unserviceable seat and back rest frame of chair CB steel with /without arms,S &F new seat and back rest frame made of Ist class hard wood including caning in Godrej pattern by 2 mm wide plastic cane and 4mm for boarder with applying two coats of black french polish on exposed wooden surfaces complete and painting to steel frame with two coat of OG synthetic enamel paint all as per drg or as directed by Engineer-In-Charge. Drg No:FD-75(M) |
| 59 | Replacement of unserviceable hand rest of chair CB steel with arms and S&F new hand rest of size 430mm x 55mm x 25 mm long made of 1st class teak wood duly polished with two coats of french black polish complete all as specified and as directed.Drg No:FD-75(M) |
| 60 | Removing the old UNSV top cap and PVC toes, S&F new PVC top cap and PVC toe to each chair as per drg or as directed by Engr-In-Charge. |
| 61 | S&F flat iron 20x3mm thick welded to steel frame to support of wooden seat to each chair as directed by Engineer-In-Charge. |
| 62 | Removing old unserviceable Seat and back plastic cane of chair CB special steel and S&F plastic cane of 2mm wide white in colour of semicircular type with border of 4mm wide plastic cane weaving at Godrej pattern and including cleaning dust and dirt etc and applying two coats of french polish of approved quality over exposed wooden surface and applying one coat of synthetic enamel paint green colour of approved shade over steel frame and providing four numbers of rubber shoes to leg complete all as specified and as directed.Drg No:FD-120 (M) |
| 63 | Removing of unserviceable seat / back rest of chair CB special and S&F seat/ back rest of size as per drawing, made of Ist class hard wood including caning in Godrej pattern with 2 mm wide plastic cane and 4mm for boarder including applying two coats of french polish on exposed wooden surfaces complete all as specified and as directed.Drg No:FD-120(M) |
| 64 | Replacement of unserviceable handle of chair CB special with hand rest with new handle of size 255mm x 50mm x 20mm made of 2nd class teak wood duly polished with french polish complete all as specified and as directed.Drg No:FD-120(M) |
| 65 | Removing of old damaged hand rest of chair CB special and S&F new hand rest of size 485mm x 255mm x 20 mm thick to be shaped as per drawing with 2nd class hard wood including support of MS flat iron 25mm x 6mm, 255 mm long, jointed by welding on iron structure and applying two coats of french polish on all exposed surfaces of wood complete all as specified and as directed.Drg No:FD-120(M) |
| 66 | Removing old unserviceable cane of chair verandah steel and S&F plastic cane of 4 mm wide, white in colour, semi circular type in matt pattern including cleaning dust, dirt etc, derusting and applying one coat of synthetic enamel paint of approved shade and providing four number of rubber shoes to legs complete all as specified and as directed.Drg No: FD-256 |
| 67 | Removing UNSV seat & back PVC sheet, S&F new seat & back PVC sheet including cleaning dust, dirt etc, derusting and applying one coat of synthetic enamel paint of approved shade and providing four number of rubber shoes to legs complete all as specified and as directed.as per drg or as directed by Engr -in- Charge. Drg No-FD/MAP-II/07 |
| 68 | S&F flat iron 20x3mm thick nos 2 welded to steel frame to support chair include one coat of synthetic enamel paint over a one coat of redoxide primer as directed by Engr-In-Charge. Drg No-FD/MAP-II/07 |
| 69 | Supply and Setting seat cushion and cover for Chair Dining cushin by removing the existing worn out seat cushion and providing new seat cushion and Cool foam size 450mmx450mm x75 mm thick ,density 40 Kg/Cum with 12 mm thick ply wood BWR grade phenol bonded covered with tapestry cloth for chair dining cushioned complete all as specified as shown drawing Note:- Tapestry cloth shall be Approved by GE.Drg No: FD/E6/MAP-II/04 |
| 70 | Removing of old damaged front leg of chair dining and S&F new front leg with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No: FD/E6/MAP-II/04 |
| 71 | Removing of old damaged rear leg of chair dining and S&F new rear leg with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No: FD/E6/MAP-II/04 |
| 72 | Removing of old damaged side rail of chair dining and S&F new side rail with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No: FD/E6/MAP-II/04 |
| 73 | Removing of old damaged front rail /back rail of chair dining and S&F new front rail with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No: FD/E6/MAP-II/04 |
| 74 | Removing of old damaged VER strips of chair dining and S&F new VER strips with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No: FD/E6/MAP-II/04 |
| 75 | Removing of old damaged stiffener of chair dining and S&F new stiffener with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed.Drg No: FD/E6/MAP-II/04 |
| 76 | Removing old damged seat & back cushion and ply wood from chair Easy Cushioned , S&F New seat & back cushion of 75 mm thick 40 mm dinesity Sleep Well/Kurlone with 12 MM BWR Ply wood duly upholstery by with Rexine Fabric not less than Rs 500/- per mtr of approved all as specified as per drg and directed by Engr-in-Charge. Drg No FD- 358 |
| 77 | Removing of damaged front leg ,S&F Front leg of 2nd class HW sal wood, as per drg or as directed by Engr-in-Charge. Drg No FD- 358 |
| 78 | All as per item No 77 above but rear leg. |
| 79 | All as per item No 77 above but side rail. |
| 80 | All as per item No 77 above but front rail. |
| 81 | All as per item No 77 above but rear rail. |
| 82 | All as per item No 77 above but back rest rail . |
| 83 | All as per item No 77 above but stiffner. |
| 84 | All as per item No 77 above but arm rest. |
| 85 | Chair Wooden Bottom. (Drg No FD-56,225,285) Removing of old damaged front leg ,S&F new 30 x 55 mm thick Front leg made of 1st class season teak, as per drg or as per existing shape and size directed by Engr-in-Charge. |
| 86 | All as per item No 85 above but rear leg. |
| 87 | All as per item No 85 above but side rail. |
| 88 | All as per item No 85 above but front rail. |
| 89 | All as per item No 85 above but rear rail. |
| 90 | All as per item No 85 above but stiffner. |
| 91 | All as per item No 85 above but back reast. |
| 92 | Removing UNSV/damaged seat of ply wood, S&F seat of 6 mm thick ply wood commercial BWR quality and provided hard PVC toe to each leg as per drg or as directed by Engineer-In-Charge. |
| 93 | M&L for applying French wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge. |
| 94 | Removing old damaged bearer of sofa set four seater and S&F new bearer of 1st class seasoned teak wood bearers of size 530mm X 40mm X 40mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 95 | Removing old damaged support to back frame of sofa set four seater and S&F new support to back frame of 1st class seasoned teak wood of size 530mm X 70mmX 50mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 96 | Removing old damaged arm of sofa set four seater and S&F new arm of 1st class seasoned teak wood of size 725mm X 70mm X 35mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 97 | Removing old damaged side rail of back frame of sofa set four seater and S&F new side rail of 1st class seasoned teak wood of size 560mm X 70mm X 40mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 98 | Removing old damaged batten of sofa set four seater and S&F new batten of 1st class seasoned teak wood of size 560 / 530mm X 50mm X 20mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 99 | Removing old damaged legs of sofa set 05 seater and S&F new legs of 1st class seasoned teak wood of size 530mm X 70mm X 35 mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 100 | Removing old damaged side rail of sofa set 05 seater and S&F new side rail of 1st class seasoned teak wood of size 600mm X 100mm X 35mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 101 | Removing old damaged bearer of sofa set 05 seater and S&F new bearer of 1st class seasoned teak wood of size 530mm X 40mm X 40mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 102 | Removing old damaged support to back frame of sofa set 05 seater and S&F new support to back frame of 1st class seasoned teak wood of size 530mm X 70mm X 50mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 103 | Removing old damaged arm of sofa set 05 seater and S&F new arm of 1st class seasoned teak wood of size 725mm X 70mm X 35 mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 104 | Removing old damaged battens of sofa set 05 seater and S&F new battens of 1st class seasoned teak wood of size 560 / 530mm X 50mm X 20 mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 105 | Removing old damaged front/back/top/bottom rails of sofa set 05 seater and S&F new front/back/top/bottom rail of 1st class seasoned teak wood of size 1730mm X 100mm X 35mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 106 | Removing old damaged bearer of sofa set 05 seater and S&F new bearer of 1st class seasoned teak wood of size 1730mm X 40mm X 40mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 107 | Removing old damaged support to back frame of sofa set 05 seater and S&F new support to back frame of 1st class seasoned teak wood of size 1730mm X 70mm X 50 mm including polishing complete all as specified and as directed.Drg No:FD-281 |
| 108 | Removing old unserviceable castor wheels from leg of Revolving Chair and S&F new caster wheel of approved quality complete all as specified and as directed. Drg No:- TP ,Godrej Model no- PCH-7022,7031,7021,7001,7032 (R)7046 or equivalent,Featherlite Model No-BE-2412 or equivalent |
| 109 | Removing old unserviceable base (Leg) of Revolving Chair and S&F new base (Leg) with wheels of approved quality complete all as specified and as directed. Drg No:- TP ,Godrej Model no- PCH-7022,7031,7021,7001,7032 (R)7046 or equivalent,Featherlite Model No-BE-2412 or equivalent |
| 110 | Removing old unserviceable seat and back of Revolving high back chair /net chair other than executive chair of any type and S&F seat and back of Revolving high back chair /net chair of approved quality complete all as specified and as directed by Engr -In -Charge. Drg No:- TP ,Godrej Model no- PCH-7022,7031,7021,7001,7032 (R)7046 or equivalent,Featherlite Model No-BE-2412 or equivalent |
| 111 | S&F hydraulic system of Revolving chair other than executive any type of approved quality complete all as specified and as directed.Drg No:- TP ,Godrej Model no- PCH-7022,7031,7021,7001,7032 (R)7046 or equivalent,Featherlite Model No-BE-2412 or equivalent |
| 112 | Removing old unserviceable Hand rest of any Revolving chair other than executive chair of any type and S&F new hand rest complete all as specified and as directed. Drg No:- TP ,Godrej Model no- PCH-7022,7031,7021,7001,7032 (R)7046 or equivalent,Featherlite Model No-BE-2412 or equivalent |
| 113 | Removing old unserviceable Height adjustment with tilt plate full set of revolving chair and S&F Height adjustment with tilt plate full set best quality complete all as specified and as directed. Drg No:- TP ,Godrej Model no- PCH-7022,7031,7021,7001,7032 (R)7046 or equivalent,Featherlite Model No-BE-2412 or equivalent |
| 114 | Removing old unserviceable castor wheels from leg of Chair Computer and S&F new caster wheel of approved quality complete all as specified and as directed. Drg No: FD/E6/MAP/01 |
| 115 | Removing old unserviceable base (Leg) of Chair Computer and S&F new base (Leg) with wheels of approved quality complete all as specified and as directed. Drg No: FD/E6/MAP/01 |
| 116 | Removing old unserviceable seat and back complete set of Chair Computer any type and S&F seat and back of Chair Computer of approved quality complete all as specified and as directed by Engr -In -Charge. Drg No: FD/E6/MAP/01 |
| 117 | S&F hydraulic system with PVC Cover of Chair Computer any type of approved quality complete all as specified and as directed. Drg No: FD/E6/MAP/01 |
| 118 | Removing old unserviceable Hand rest of any Chair Computer of any type and S&F new hand rest complete all as specified and as directed. Drg No: FD/E6/MAP/01 |
| 119 | Removing old unserviceable Height adjustment with tilt plate full set of Chair Computer and S&F Height adjustment with tilt plate full set best quality complete all as specified and as directed. Drg No: FD/E6/MAP/01 |
| 120 | Removing old damaged unserviceable seat and back Complete Set of chair writing (MAP) and S & F new seat and back Complete Set with necessary fixing arrangement all as specified and as directed.Drg No: FD/E6/MAP/12 |
| 121 | Removing old damaged unserviceable hand rest of chair writing steel (MAP) of any type and S&F hand rest of apporved quality complete all as specified and as directed.Drg No: FD/E6/MAP/12 |
| 122 | Removing old damaged unserviceable MS Tubular frame writing (MAP) and S & F new MS tubular frame made out of 25 MMX10MM Sec with necessary fixing arrangement complete all as specified and as directed.Drg No: FD/E6/MAP/12 |
| 123 | S&F new mirror 5 to 5.5 mm thick mirror of size specified in drawing to Mirror dressing Gents including taking out existing broken / faded mirror complete all as specfied and directed. Drg No:- FD/E6/MAP/16 |
| 124 | S&F new top of 18 mm thick MDF board ISI marked of size 600mm x 100 mm including 4mm thick teak wood beading to all around and polishing to exposed surface including removing old damaged top of Mirror dressing Gents complete all as specifed and directed.Drg No:FD/E6/MAP/16 |
| 125 | Removing old unserviceable side and S&F new side of size 1200mm x 100 mm of Mirror dressing Gents complete all as specifed and directed.Drg No:FD/E6/MAP/16 |
| 126 | Removing of old unserviceable base ply to be replaced by 12mm thick BWP plywood of size 1200mm x 600 mm of Mirror dressing Gents complete all as specifed and directed.Drg No:FD/E6/MAP/16 |
| 127 | S&F in replacement of 5 to 5.5 mm thick glass shelves of size 100mm x 600 mm including repair of shelves to Mirror dressing Gents complete all as specifed and directed.Drg No:FD/E6/MAP/16 |
| 128 | S&F in replacement of teak wood legs of size 450mm x 38 mmx 38 mm as per drawing to Mirror dressing Gents complete all as specifed and directed.Drg No:FD/E6/MAP/16 |
| 129 | S&F 5 to 5.5 mm thick mirror of size specified in drawing to hat stand with mirrror including taking out existing broken / faded mirror complete all as specfied and directed.Drg No :- FD-23 & 233 |
| 130 | S&F new back side ply 6 mm BWP grade as per drg including removing old damaged back side ply of hat stand with mirror complete all as specified and as directed. Drg No :- FD-23 & 233 |
| 131 | S&F new front ply 4 mm thick BWP grade one side teak face as per drg and removing of old damaged front ply of hat stand with mirror complete all as specified and as directed. Drg No :- FD-23 & 233. |
| 132 | S&F new brass Peg as per drg and removing of old damaged peg of hat stand with mirror complete all as specified and as directed. Drg No :- FD-23 & 233. |
| 133 | S&F top of 18 mm thick MDF Board, ISI marked including 4mm thick teak wood edging alround including polishing to exposed surfaces including removing old damaged unservicable top of table peg complete all as specified and directed.Drg No:- FD-27, 227, 277, 384,MAP |
| 134 | S&F new leg of seasoned teak wood of size specified in drawing and removing of old damaged leg of table peg complete all as specified and as directed. Drg No FD-27, 227, 277 & 384 |
| 135 | S&F new long rail of seasoned teak wood of size specified in drawing and removing of old damaged long rail of table peg complete all as specified and as directed.Drg No :-FD-27, 227, 277 & 384 |
| 136 | S&F new short rail of seasoned teakwood of specified size and removing of old damaged short rail of table peg complete all as specified and as directed. Drg No:- FD-27, 227, 277 & 384 |
| 137 | S&F new top of 18 mm thick MDF Board grade-I, ISI marked including 4mm thick teak wood beading all around the top and polishing including removing old damaged top of table centre of size 450mm x 900 mm complete all as specified and as directed.Drg No:- FD-274, 235 & 134 |
| 138 | S&F new legs of size 60mm x 30 mmx 400 mm of 1st class seasoned teak wood including polishing and removing old damaged legs of table centre complete all as specified and as directed. Drg No:- FD-274, 235 & 134 |
| 139 | S&F in replacement long rail of size 60mm x 30 mmx 850 mm including polishing and removing old damaged long rail of table centre complete all as specified and as directed. Drg No:- FD-274, 235 & 134 |
| 140 | S&F in replacement short rail of 20mm x 50 mm x 400 mm including polishing and removing old damaged short rail of table centre complete all as specified and as directed. Drg No:- FD-274, 235 & 134 |
| 141 | S&F in replacement centre stiffener of size 20 mm x 50 mmx 400 mm including polishing and removing old damaged side and centre stiffener of table centre complete all as specified and as directed. Drg No:- FD-274, 235 & 134 |
| 142 | S&F new top of 18mm MDF Board grade- I, ISI marked and polishing and removing of old damaged top of table bed side complete all as specified and directed .Drg No:- FD-28 & 276 |
| 143 | S&F 12 mm thick MDF Board ISI marked as in left and right side and removing of old damaged left and right side board of table bed side complete all as specified and directed .Drg No:- FD-28 & 276 |
| 144 | S&F 6 mm thick ply BWP grade to back side of table bed side and removing of old damaged ply to back side of table bed side complete all as specified and directed .Drg No:- FD-28 & 276 |
| 145 | S&F new shelf of 12 mm thick MDF Board ISI marked and removing of damaged shelf of table bed side complete all as specified and directed .Drg No:- FD-28 & 276 |
| 146 | S& F new bottom of 12mm thick MDF Board ISI marked and removing of old damaged bottom of table bed side complete all as specified and directed .Drg No:- FD-28 & 276 |
| 147 | S&F top board 18 mm thick MDF BoardISI marked , exterior grade OSD with teak wood beading all around including polishing and removing of old damaged top of side board complete all as specifed and as directed. Drg No:- FD-26,241&372 |
| 148 | S&F MDF Board left and right side of side board and removing of old damaged left and right side of side board complete all as specifed and as directed. Drg No:- FD-26,241&372 |
| 149 | S&F back side ply of 12 mm thick BWP grade and removing of old damaged back side ply of side board complete all as specifed and as directed. Drg No:- FD-26,241&372 |
| 150 | S&F shutter as per existing shape including magnaet catchers, handles and hinges and removing of old damaged shutter of side board complete all as specifed and as directed. Drg No:- FD-26,241&372 |
| 151 | S&F new drawer as per drawing with knobs and removing of old damaged drawers of side board complete all as specifed and as directed. Drg No:- FD-26,241&372 |
| 152 | S&F shelves 12 mm thick BWP grade ply wood as per drawing and removing of old damaged shelves of side board complete all as specifed and as directed. Drg No:- FD-26, 241 & 372 |
| 153 | S&F new top of 18mm thick MDF Board, ISI marked with 4 mm thick teak wood beading all around including polishing and removing of old damaged top of binsolid linen multipurpose complete all as specified and as directed. Drg No:- FD/E6/MAP/09) |
| 154 | S&F drawers as per drawing and removing of old damaged drawer of binsolid linen multipurpose complete all as specified and as directed. Drg No:- FD/E6/MAP/09) |
| 155 | S&F MDF Board shutters with magnetic cathchers as per drawings including decoractive handles and removing of old damaged shutter of binsolid linen multipurpose complete all as specified and as directed. Drg No:- FD/E6/MAP/09) |
| 156 | S&F Wooden base including 25mm x 25 mm stiffners and removing of old damaged base of binsolid linen multipurpose complete all as specified and as directed. Drg No:- FD/E6/MAP/09) |
| 157 | S&F new top of size 700 mm x 400mm x 18 mm thick MDF Board ISI marked with 4 mm thick teak wood edging all around including polishing and removing of old damaged/UNSV top for teapoy varandah complete and all as specified and directed.Drg No:- FD/E6/MAP/17 |
| 158 | S&F new wire mesh of existing dia and aperture and applying two coats of synthetic enamel paint over one coat of red oxide primer including necessary welding and removing of old damaged wire mesh of teapoy varandha &all as specified and as directed. complete and all as specified and directed.Drg No:- FD/E6/MAP/17 |
| 159 | S&F new long rail of existing size and applying two coats of synthetic enamel paint over one coat of red oxide primer including necessary welding and removing of old damaged long rail of teapoy varandha &all as specified and as directed. complete and all as specified and directed.Drg No:- FD/E6/MAP/17 |
| 160 | S&F new short rail of existing size and applying two coats of synthetic enamel paint over one coat of red oxide primer including necessary welding and removing of old damaged short rail of teapoy varandha &all as specified and as directed. complete and all as specified and directed.Drg No:- FD/E6/MAP/17 |
| 161 | S&F new leg of existing size and applying two coats of synthetic enamel paint over one coat of red oxide primer including necessary welding and removing of old damaged leg of teapoy varandha &all as specified and as directed. complete and all as specified and directed.Drg No:- FD/E6/MAP/17 |
| 162 | S&F new top of size 450mm x 450 mm x 18 mm thick MDF Board ISI marked , with 4 mm thick teak wood edging all around including polishing and removing of old damaged unservicable top of table bed side complete all as specified and as directed.Drg No :-FD/E6/MAP/15R |
| 163 | S&F side of size 400mmx380mm x18 mm MDF Board and removing of old damaged unservicable side of table bed side complete all as specified and as directed.Drg No :-FD/E6/MAP/15R |
| 164 | S&F bottom drawer sides of size 300mm x 400 mm and removing of old damaged unservicable bottom drawer of table bed side complete all as specified and as directed.Drg No :-FD/E6/MAP/15R |
| 165 | S&F top drawer sides of size 400 mmx 100 mm MDF Board and removing of old damaged unservicable top drawer side of table bed side complete all as specified and as directed.Drg No :-FD/E6/MAP/15R |
| 166 | S&F top drawer back ply 6 mm thick of size 100 mmx 400 mm and removing of old damaged unservicable back ply of table bed side complete all as specified and as directed.Drg No :-FD/E6/MAP/15R |
| 167 | S&F top/Bottom drawer bottom ply of size 400mm x 400mm x12mm and removing of old damaged unservicable bottom ply of table bed side complete all as specified and as directed.Drg No :-FD/E6/MAP/15R |
| 168 | Supply only decorative handle 75 mm to drawer of table bed side complete all as specified and as directed.Drg No :-FD/E6/MAP/15R |
| 169 | S& F new legs made out of 25 mm round pipe 1.6 mm thick with all exposed steel surfaces black enamel paint and removing old damaged legs of rack shoes steel complete all as specified and directed.Drg No :-FD-E6/MAP/02 ® |
| 170 | S&F in replacement shelves made out of 19 mm round pipe & weld mesh with all exposed steel surfaces black powder coated complete all as specified and directed.Drg No :-FD-E6/MAP/02 (R) |
| 171 | S&F in replacement of mild steel sheet 1mm thick as required as per drawing with necessary bending and welding including removing and refixing of serviceable parts including applying two coats of olive green synthetic enamel paint over a coat of red oxide primer on new steel surfaces after preparation of surface complete all as specified, as directed and as shown in drawing. Drg No:- FD-1032,FD-67(M),FD-1031,FD-1034,FD-1029,FD-114(M),FD/E6/MAP/18,FD-257,FD-104(M),FD-81(M),FD-106(M),FD-1008,FD-90(M),FD-1028,FD-69(M) |
| 172 | Table Dressing Ladies with Mirror (Drg No FD/E6/MAP/11) Removing of old damage mirror S&F new mirror of 5 to 5.5mm thick mirror as per drg or as directed by Engineer-In-Charge. |
| 173 | Removing of old damage drawers, S&F new drawer of 12/6 mm thick commercial BWR qualithy playwood with knobs as per drg or as directed by Engineer-In-Charge. |
| 174 | Removing of old damage Top S&F new Top of 18 mm thick MDF Board as per drg or as directed by Engineer-In-Charge. |
| 175 | Removing of old damage left/right side and centre protion S&F new left/right side & centre protion of 18 mm MDF Board as per drg or as directed by Engineer-In-Charge. |
| 176 | Removing of old damage back side ply,S&F new back side Ply of 6 mm thick commmercial BWR quality, as per drg or as directed by Engineer-In-Charge. |
| 177 | Removing of old damage leg , S&F new leg as per drg or as directed by Engineer-In-Charge. |
| 178 | Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge. |
| 179 | Removing old damage channel S&F New Telescopic channel stainless steel, all as specified shape, size, drg or as per directed by Engr-in-Charge. |
| 180 | Removing of damage old UNSV wheel S&F new wheel to stool revolving complete all as per specification or as directed Engr-in-Charge. |
| 181 | Teapoy Verandah Steel (Drg FD-255, 383) Removing old damaged top, S&F new top of 18 mm thick MDF Board as per existing shape and size all as per drg are as directed by Engr-in-Charge. |
| 182 | M&L for welding to damage/decayed steel frame all as directed by Engr-In-Charge. |
| 183 | Removing UNSV plastic shoes from leg, S&F new hard PVC shoes each leg best quality as per drg or as directed by Engr-in-Charge. |
| 184 | M&L for painting steel surface with two coat of white synthetic enamel paint as per drg or as directed by Engr-in-Charge. |
| 185 | Table Computer (TP, FD/E6/MAP/03) Removing old damaged top, S&F new MDF Top as per existing shape and size, all as per drg or as directed by Engr-in-Charge |
| 186 | Removing old damaged tray S&F MDF new tray as per existing shape and size, all as per drg or as directed by Engr-in-Charge |
| 187 | Removing old damaged shelf S&F new shelf as per existing shape and size, all as per drg or as directed by Engr-in-Charge |
| 188 | Removing UNSV plastic shoes from Leg and S&F new hard plastic shoes of best quality of each leg as per drg or as directed by Engr-in-Charge. |
| 189 | Removing old damage channel S&F New Telescopic channel stainless steel, all as specified shape, size, drg or as per directed by Engr-in-Charge. |
| 190 | TV Trolly (TP, FD/E6/MAP/04 (R)) Removing of old damage Top of TV Trolly S & F new 18 mm MDF Board Top, as per drg or as per existing shape and size directed by Engr-in-Charge. |
| 191 | Removing of old damage left/right side, S & F new 18 mm MDF Board with teak venreed OSD left/right side as per drg or as directed by Engineer-In-Charge. |
| 192 | Removing of old back side, S&F new18 mm MDF Board with teak venreed OSD to back side as per drg or as directed byf Engineer-In-Charge. |
| 193 | Removing of old damage Fornt Glass , S&F New Front Glass size 600mm X 300mm x 6mm thick with wooden frame as per drg or as directed by Engineer-In-Charge. |
| 194 | Removing of old damaged bottom of table, S&F New 18 mm MDF Board with teak venreed OSD bottom as per drg or as directed by Engineer-in-Charge. |
| 195 | Removing of damage old UNSV wheel S&F new wheel to TV Trolly complete all as per specification or as directed Engr-in-Charge. |
| 196 | Removing old damage channel S&F New Telescopic channel stainless steel, all as specified shape, size, drg or as per directed by Engr-in-Charge. |
| 197 | Bench cushion with back rest (FD-1048) Removing old damage UNSV sheetand back plank with foam & leather rexine, S&F new plank of 20 mm thick 5'x1' wide with foam of 50 mm thick 40 deniksty & leather rexine as per existing shape and size all as per drg and as directed by Engineer-in-Charge |
| 198 | M&L for welding to damage/decayed steel frame with arc welding as per std workmanship or as per directed by Engr-in-Charge. |
| 199 | M&L for spray painting with synthetic enamel OG paint all exposed MS surface and french wood polish all exposed wood surface as per drg completed as specified as directecd by En gr-in-Charge. |
| 200 | Removing old unserviceable head board and foot board ful set (including frame work of 38MMX38MM MS square pipe (18 Gauge) , 18 MM X18 MM MS Square pipe (18 Gauge ) ,18 MM both side prelaminated board screw to ms strip at welded to 18 MM th rectangular pipe , 25 MM x 65 mm MS rect MS pipe (18 Gauge ) , 25 MM X 25 MM MS square MS Pipe (18 Gauge )) from bed hard steel with plywood top and S&F new head board and foot board (including frame work of 38MMX38MM MS square pipe (18 Gauge) , 18 MM X18 MM MS Square pipe (18 Gauge ) ,18 MM both side prelaminated board screw to MS strip at welded to 18 MM th rectangular pipe , 25 MM x 65 mm MS rect MS pipe (18 Gauge ) , 25 MM X 25 MM MS square MS Pipe (18 Gauge) ) welding with both side long rail of Bed hard steel with plywood top complete all as specified and directed.Drg No:- FD/E6/MAP/08(R) |
| 201 | S&F 25 mmX65 mm mild steel pipe ,medium grade,ISI marked, 18 gauge with necessary bending , welding as required and applying two coats of synthetic enamel black paint over a coat of red oxide primer on replaced steel surfaces including removing of existing broken/damaged pipe of Bed hard steel with ply top complete all as specified and directed.Drg No:- FD/E6/MAP/08(R) |
| 202 | S&F 25mmX 25mm mild steel pipe ,medium grade,ISI marked, 18 gauge with necessary bending , welding as required and applying two coats of synthetic enamel black paint of approved shade over a coat of red oxide primer on replaced steel surfaces including removing of existing broken/damaged pipe of Bed hard steel with ply top complete all as specified and directed.Drg No:- FD/E6/MAP/08(R) |
| 203 | S&F 12 mm thick plywood BWR grade,type BB, ISI marked with necessary bolts and nuts of existing size and shape including removing old damaged unserviceable plywood of Bed Hard Steel With Ply top complete all as specified and directed. Drg No:- FD /E6/MAP/08(R) |
| 204 | Bed Ply Wood Top (Drg No FD-213, 246) Removing of old damage long rail, S&F New long rail of IInd class Hard Wood Sal wood as per drg or as directed by Engineer-In-Charge. |
| 205 | All as per item No 200 above but stiffner |
| 206 | All as per item No 200 above but short rail |
| 207 | Removing of old damage leg, S&F new leg of 60 x 60 at top & 30 x30 at bottom as per drg or as directed by Engineer-In-Charge. |
| 208 | Removing of old damage full set head board including Legs, S&F full set head board including Legs as per drg or as directed by Engr-in-Charge. |
| 209 | Removing of old damage full set foot board including Legs, S&F full set foot board including Legs as per drg or as directed by Engr-in-Charge. |
| 210 | Removing of old damage ply teak wood face both side from head board both side , S&F 3.5/4 MM ply teak face both side of head board as per drg or as directed by Engr-in-Charge. |
| 211 | Removing of old damage ply teak wood face both side from foot board both side , S&F 3.5/4 MM ply teak face both side of foot board as per drg or as directed by Engr-in-Charge. |
| 212 | Removing of old damage 12mm BWR ply wood, S&F 12mm BWR ply wood ISI marked as per drg or as directed by Engineer-In-Charge. |
| 213 | M&L for applying french wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge. |
| 214 | Charpoy IP hard top steel (Drg No FD/E6/MAP-II/01) Removing of old damage 12mm BWR ply wood, S&F 12mm BWR ply wood ISI marked as per drg or as directed by Engineer-In-Charge. . |
| 215 | M&L for welding to damage/decayed steel frame all as per drg or as directed by Engr-in-Charge. |
| 216 | M&L for painting steel surface with two coat of Black synthetic enamel paint as per drg or as directed by Engr-in-Charge. |
| 217 | Charpoy Folding with hard top (Drg No FD - 388 (R)) Removing of old damage 12 mm BWR ply wood, S&F 12 mm BWR ply wood ISI marked as per drg or as directed by Engineer-In-Charge. . |
| 218 | M&L for painting steel surface with two coat of OG synthetic enamel paint as per drg or as directed by Engr-in-Charge. |
| 219 | Charpoy GI pipe with ply top (Drg No FD-220) Removing of damage UNSV Top plywood , S&F new 12mm thick BWR plywood as per specification or as directed by Engr-in charge |
| 220 | Removing damaged /UNSV long rail, S&F new 32 mm dia BWR dia GI long rail med grade ISI marked threading shall be made up to 22 mm at one end and 40mmon other end complete all as specified & directed by Engr-in charge |
| 221 | Removing of old damaged GI UNSV long rail & fabricated in short rail to charpoy GI pipe threading shall be made upto 22 mm at one end and 40 mm on other end complete all as specified as directed by Engr-in-Charge. |
| 222 | Removing old damaged GI UNSV short rail & Long Rail and fabricated in legs to charpoy GI pipe threading shall be made upto 40 mm complete all as specified as directed by Engr-in-Charge |
| 223 | Removing of old damaged GI three way elbow 32mm dia S&F New GI three way Elbow 32mm dia ISI marked all as specified and directed by Engr-in-Charge. |
| 224 | Removing of old damaged GI 32 mm dia check nut, S&F GI 32 mm dia check nut 10mm thick complete all as specified and directed by Engr-in-Charge. |
| 225 | Removing of old damaged FI clamp from GI charpoy S&F new FI clamps of size 25x3mm welded to GI leg pipe complete all as specified and directed Engr-in-Charge. |
| 226 | Table office Clk / Officer steel (Drg No FD-84 1004, 1003) Removing old damaged front/rear rail, S&F by welding new front/rear rail of 25mm MS square pipe 1.6 mm thick as per existing shape and size and as per drg or as directed by Engr-in-Charge. |
| 227 | All as per item No 226 above but side rail. |
| 228 | All as per item No 226 above but legs. |
| 229 | All as per item No 226 above but stiffener. |
| 230 | Removing old damaged full set MS Sheet Box with drawer , S&F new full set 01 mm MS Sheet Box with drawer with lock as per existing shape and size including Painting , as per drg or as directed by Engr-in-Charge. |
| 231 | Removing old damaged full set MS Sheet Box with door and shelf , S&F new full set 01 mm MS Sheet Box including door and shelf with lock as per existing shape and size including Painting , as per drg or as directed by Engr-in-Charge. |
| 232 | Removing old damaged top of Table, S&F new 18 mm MDF Board Top of table as per existing shape and size including French polish all as per drg or as directed by Engr-in-Charge. |
| 233 | M&L for welding to damaged/ decayed steel frame of table with arch welding as per std workmanship or as directed by Engr-in-Charge. |
| 234 | Removing old damaged lock, S&F new lock as per existing shape and size complete all as specified and directed by Engr-in-Charge. |
| 235 | Table 900x600x760mm with drawer steel (Drg No FD-1008) Removing old damaged top, S&F 18mm MDF Board top as per existing shape and size all as per drg or as directed by Engr-in-Charge. |
| 236 | All as per item No 235 above but long rail |
| 237 | All as per item No 235 above but short rail |
| 238 | All as per item No 235 above but Legs |
| 239 | All as per item No 235 above but Center stiffener |
| 240 | Removing old damaged drawers, S&F new drawers as per drg or as directed by Engr-in-Charge. |
| 241 | Removing of old damaged drawer lock, S&F drawer lock as per sample or as directed by Engineer-in-Charge. |
| 242 | M&L for welding to damaged/ decayed steel frame of table with arch welding as per std workmanship or all as directed by Engr-in-Charge. |
| 243 | Removing UNSV plastic shoes from Leg, S&F new hard PVC shoes of best quality of each leg as per drg or as directed by Engr-in-Charge. |
| 244 | M&L for spray painting of table with synthetic enamel OG paint as per drg complete all as specified as directed by Engr-in-Charge. |
| 245 | Table 900 x 600 x 760 mm with drawer (Drg No FD-224, 283) Removing old damaged top,S & F new 18 mm MDF Board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge. |
| 246 | Removing old damaged legs , S & F new legs as per existing shape and size, as per drg or directed by Engr-in-Charge. |
| 247 | All as per item No 246 above but long Rail. |
| 248 | All as per item No 246 above but short Rail. |
| 249 | All as per item No 246 above but side stiffner. |
| 250 | All as per item No 246 above but centre stiffner. |
| 251 | Removing old damaged Drawer , S & F new Drawer made of 12/6 mm thick BWR commercial plywood as per existing shape and size and replaced unsv knobs, as per drg or directed by Engr-in-Charge. |
| 252 | M&L for applying French wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge. |
| 253 | S&F new top of 18 mm thick MDF board one side decorative face and other side balancing white, grade-I, ISI marked (exterior grade) including 4mm thick teak beading all around and polishing including removing of old damaged unservicable top for table dining 04 persons complete all as specified and as directed.Drg No:- FD/MAP-II/03 |
| 254 | S&F new leg of 1st class seasoned teak wood of size as specifed in drawing including polishing and removing of old damaged leg of table dinning 04persons complete all as specified and as directed. Drg No:- FD/MAP-II/03 |
| 255 | S&F new long rail of 1st class seasoned teak wood of size as specifed in drawing including polishing and removing of old damaged long rail of table dinning 04 persons complete all as specified and as directed.Drg No:- FD/MAP-II/03 |
| 256 | S&F new short rail of 1st class seasoned teak wood of size as specifed in drawing including polishing and removing of old damaged short rail of table dinning 04 persons complete all as specified and as directed.Drg No:-FD/MAP-II/03 |
| 257 | S&F new top of 18 mm thick MDF Board one side decorative face and other side balancing white, grade-I, ISI marked (exterior grade) including 4mm thick teak beading all around and polishing including removing of old damaged unservicable top for table dining 6 persons complete all as specified and as directed.Drg No:- FD-30, 278 & 273,FD/MAP-II/03 |
| 258 | S&F new leg of 1st class seasoned teak wood of size as specifed in drawing including polishing and removing of old damaged leg of table dinning 6 persons complete all as specified and as directed.Drg No:- FD-30, 278 & 273,FD/MAP-II/03 |
| 259 | S&F new long rail of 1st class seasoned teak wood of size as specifed in drawing including polishing and removing of old damaged long rail of table dinning 6 persons complete all as specified and as directed.Drg No:- FD-30, 278 & 273,FD/MAP-II/03 |
| 260 | S&F new short rail of 1st class seasoned teak wood of size as specifed in drawing including polishing and removing of old damaged short rail of table dinning 6 persons complete all as specified and as directed.Drg No:- FD-30, 278 & 273,FD/MAP-II/03 |
| 261 | S&F new top of 18 mm thick MDF Board ISI marked , with 4 mm thick teak wood edging all around including polishing and removing of old damaged unservicable top for teapoy complete all as specified and as directed. Drg No:- FD-232, 278 & 382 |
| 262 | S&F new leg of 1st class seasoned teak wood of size specified in drawing including polishing and removing old damaged leg of teapoy complete all as specified and as directed. Drg No:- FD-232, 278 & 382 |
| 263 | S&F new long rail of 1st class seasoned teak wood of size specified in drawing including polishing and removing old damaged long rail of teapoy complete all as specified and as directed. Drg No:- FD-232, 278 & 382 |
| 264 | S&F new short rail of 1st class seasoned teak wood of size specified in drawing including polishing and removing old damaged short rail of teapoy complete all as specified and as directed. Drg No:- FD-232, 278 & 382 |
| 265 | S&F side and center stiffener of 1st class teak wood size specified in drawing including polishing and removing old damaged side and centre stiffener of teapoy complete all as specified and as directed. Drg No:- FD-232, 278 & 382 |
| 266 | Almirah Steel Large with Shelves /Almirah large steel; with 1/2 H&1/2 Shelves Removing old worn out damaged base legs, S&F 1mm thick MS new legs as per existing shape and size (including Weldings) as per drg or directed by Engr-in-Charge. (Drg No FD-1031,104,FD/E6/MAP/18) |
| 267 | All as per item No 266 above but shelves |
| 268 | All as per item No 266 above but shutter |
| 269 | All as per item No 266 above but base/ top sheet |
| 270 | All as per item No 266 above but Hinges |
| 271 | Removing of old damaged door lock, S&F new door lock as per sample or as directed by Engineer-in-Charge. |
| 272 | Removing of old damaged CP handle, S&F New CP handle as per sample as directed by Engineer-in-Charge. |
| 273 | Almirah Steel Med/Small with shelves (Drg No FD-67 1032) Removing old worn out damaged base legs, S&F 1mm thick MS new legs as per existing shape and size (including Weldings) as per drg or directed by Engr-in-Charge. |
| 274 | All as per item No 273 above but shelves |
| 275 | All as per item No 273 above but shutter |
| 276 | All as per item No 273 above but base/ top sheet |
| 277 | All as per item No 273 above but Hinges |
| 278 | Removing of old damaged door lock, S&F new door lock as per sample or as directed by Engineer-in-Charge. |
| 279 | Removing of old damaged CP handle, S&F New CP handle as per sample as directed by Engineer-in-Charge. |
| 280 | Locker steel all types :- Removing old worn out damaged base legs, S&F 1mm thick MS new legs as per existing shape and size (including Weldings) as per drg or directed by Engr-in-Charge. (Drg No (Drg No FD-1029,257,CEJZ/TD/CDA/111) |
| 281 | All as per item No 280 above but shutter/Door |
| 282 | All as per item No 280 above but base/ top sheet |
| 283 | All as per item No 280 above but Hinges |
| 284 | Removing of old damaged door lock, S&F new door lock as per sample or as directed by Engineer-in-Charge. |
| 285 | Removing of old damaged Hasp and staples , S&F new Hasp and staples as per drg /sample or as directed by Engineer-in-Charge. |
| 286 | Removing of old damaged CP handle, S&F New CP handle as per sample as directed by Engineer-in-Charge. |
| 287 | Stool Steel 510 mm (Drg No FD-81) Removing old damaged seat, S&F 1mm thick MS seat as per existing shape and size as per drg or directed by Engr-in-Charge. |
| 288 | All as per item No 287 above but legs |
| 289 | All as per item No 287 above but stiffener |
| 290 | M&L for welding to damaged/ decayed steel frame with arc welding as per std workmanship or as directed by Engr-in-Charge. |
| 291 | M&L for spray painting with synthetic enamel paint OG over a coat of red ooxide zinc chrome primer as per drg or as directed by Engr-in-Charge. |
| 292 | Book case steel (Drg No FD-1028, 69 (M)) Removing old worn out damaged base legs, S&F 1mm thick MS new legs as per existing shape and size as per drg or directed by Engr-in-Charge. |
| 293 | All as per item No 292 above but shelves |
| 294 | All as per item No 292 above but shutter |
| 295 | All as per item No 292 above but base/ top sheet |
| 296 | All as per item No 292 above but glass |
| 297 | Removing of old damaged door lock, S&F new door lock as per sample or as directed by Engineer-in-Charge. |
| 298 | Removing of old damaged CP handle, S&F New CP handle as per sample as directed by Engineer-in-Charge. |
| 299 | M&L for welding to damaged/ decayed steel frame with arc welding as per std workmanship or as directed by Engr-in-Charge. |
| 300 | M&L for two coat spray painting with synthetic enamel paint OG as per drg or as directed by Engr-in-Charge. |
| 301 | Chair school with hand board (FD-FD/E6/MAP/05) Removing UNSV plastic sheet, S&F new plastic sheet as per drg or as directed by Engr -in- Charge. |
| 302 | M&L for welding to damage/decayed steel frame all as per drg or as directed by Engr-in-Charge. |
| 303 | Removing the old damage hand board, S&F hand board as per drg or as directed by Engr-In-Charge. |
| 304 | Removing unsv plastic shoes from chair, S&F new hard PVC shoes of best quality as per drg or as directed by Engr-in-Charge. |
| 305 | M&L for painting steel surface with two coat of Black synthetic enamel paint as per drg or as directed by Engr-in-Charge. |
| 306 | Book Case wooden (Drg No FD-237,355) Removing old damage top S&F New top18 mm thick MDF Board as per existing shape and size all as per drg and directed by Engr-in-Charge. |
| 307 | Removing old damage Side of Book Case S&F new 18 MM thick MDF board teak wood face as per existing shape and size all as per drg and directed by Engr-in-Charge |
| 308 | Removing old damage back side plywood top 6 mm thick S&F New plywood top 6 mm thick as per existing shape and size all as per drg and directed by Engr-in-Charge |
| 309 | Removing old damage Bottom of book case S&F New Bottom MDF Board of 18mm thick as per existing shape and size all as per drg and directed by Engr-in-Charge |
| 310 | Removing old damage leg, S&F New legs of 1st class HW sal wood as per existing shape and all size, as per drg or directed by Engr-in-Chagre |
| 311 | Removing old damage shelf S&F New shelf 18 MM thick MDF board as per existing shape and size all as drg and diredted by Engr-in-charge |
| 312 | M&L for applying French wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge. |
| 313 | Board Notice (Drg No FD-1042, 99 (M), 117 (M), 1041 ) Removiing old damage unsv green baize cloth, S&F New green baize cloth of best quality with allround beadings of 1st class HW as per drg or as directed by Engr-in-Charge. |
| 314 | Removing old damage unsv frame S&F new frame as per existing shape and size, as per drg or directed by Engr-in-Charge. |
| 315 | All as per item No 314 above but new both door glass 4mm thick as per existing shape and size . |
| 316 | Removing old damage Soft board S& F New soft board as per exsisitng shape and size all as specified and directed by Engr-in-charge. |
| 317 | M&L for applying French wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge. |
| 318 | Supply and setting of 100 mm thick (32 density) foam cusion Make - sleep well/Kurlon for Sofa set with cover of tapestry cloth of approved quality not less than Rs 250/RM including removing old damage cushion from sofa set 05 seater complete all as specified and directed. Drg No: FD-281,FD/MAP/06 |
| 319 | S&F MDF Board 18 MM thick as required as per drawing with necessary cutting including removing and refixing of serviceable parts including applying two coats of french polishing on wooden surfaces after preparation of surface , complete all as specified, as directed and as shown in drawing. Drg No:- FD-273,384,382,275,FD/E6/MAP/16,274,276,FD/MAP-II/03,372,FD/E6/MAP/09,FD/E6/MAP/15 (R),FD/E6/MAP/17,FD/E6/MAP/03 |
| 320 | M&L for French polishing to Chair Dining after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-279 |
| 321 | M&L for French polishing to chair Writing after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-280 |
| 322 | M&L for French polishing to chair easy after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-229 |
| 323 | M&L for French polishing to chair easy with Cushioned after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-358 |
| 324 | M&L for French polishing to Chair Dining officer after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD/E6/MAP-II/04 |
| 325 | M&L for French polishing to Table dressing Gents after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD/E6/MAP/16 |
| 326 | M&L for French polishing to Hat stand with mirror after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-23&233 |
| 327 | M&L for French polishing to Peg table after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-27,227,277,384&MAP |
| 328 | M&L for French polishing to Table centre after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-274,235,134 |
| 329 | M&L forFrench polishing to Table bed side after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-28,276 |
| 330 | M&L for French polishing to Table dining 06/08 persons after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: 30,278,273,FD/MAP-II/03 |
| 331 | M&L for French polishing to Teapoy after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-232,278,382. |
| 332 | M&L for French polishing to Side board after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-26,241,372 |
| 333 | M&L for French polishing to Binsolid linen Ironing Board after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD/E6/MAP/09 |
| 334 | M&L for French polishing to Table bed side MAP after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD/E6/MAP/15 R |
| 335 | M&L for French polishing to Sofa set 04 seaters with cushion after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD – 281, FD/MAP/06 |
| 336 | M&L for French polishing to Sofa set 5 seaters with cushion after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD – 281, FD/MAP/06 |
| 337 | M&L for French polishing to Table dining 4 Person after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD – 273, FD/MAP-II/03 |
| 338 | M&L for French polishing to TV Trolly after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: TP, FD-E6/MAP/03 |
| 339 | M&L for two coat spray painting with synthetic enamel paint black to Teapoy Verandah after removing the dirt including smoothing all the surface of exposed steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-FD/E6/MAP/17 |
| 340 | M&L for two coat spray painting with synthetic enamel paint black to Rack shoe after removing the dirt including smoothing all the surface of exposed steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD/E6/MAP/02 R |
| 341 | M&L for two coat spray painting with synthetic enamel paint OG to any type of locker steel after removing the dirt including smoothing all the surface of exposed Steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-257,FD-1029,CEJZ/TD/CDA/111 |
| 342 | M&L for two coat spray painting with synthetic enamel paint OG to Almirah medium /Small steel after removing the dirt including smoothing all the surface of exposed Steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-1032 |
| 343 | M&L for two coat spray painting with synthetic enamel paint OG to Almirah large steel with shelves / Almirah large steel with half hanging& half Shelves after removing the dirt including smoothing all the surface of exposed steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No:FD – 1031, 104 (M) , FD/E6/MAP/18 |
| 344 | M&L for two coat spray painting with synthetic enamel paint OG to Table office Clk / officer steel after removing the dirt including smoothing all the surface of exposed steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD – 84, 1004, 1003 |
| 345 | M&L for two coat spray painting with synthetic enamel paint OG to Chair CB steel with Armsafter removing the dirt including smoothing all the surface of exposed steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD - 75 |
| 346 | M&L for two coat spray painting with synthetic enamel paint OG to Chair CBA Special with hand rest after removing the dirt including smoothing all the surface of exposed steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No: FD-120 (M) |
| 347 | M&L for two coat spray painting with synthetic enamel paint black to Table computer after removing the dirt including smoothing all the surface of exposed steel portion by using sand paper including filling the pores / joints with putty wherever required and french polishing on wooden portion complete all as specified and as directed.Drg No:TP,FD/E6/MAP/03 |
| 348 | M&L for two coat spray painting with synthetic enamel paint white to Chair varandha steel after removing the dirt including smoothing all the surface of exposed steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No:FD - 256 ,359, FD/MAP-II/06 |
| 349 | M&L for two coat spray painting with synthetic enamel paint black to Chair writing steel after removing the dirt including smoothing all the surface of exposed steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No:FD/E6/MAP/12 |
| 350 | M&L for two coat spray painting with synthetic enamel paint black to Charpoy IP hard top steel after removing the dirt including smoothing all the surface of exposed steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No:FD/MAP-II/01 |
| 351 | M&L for two coat spray painting with synthetic enamel paint black to Bed hard steel after removing the dirt including smoothing all the surface of exposed steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed.Drg No:FD/E6/MAP/08 ® Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 14 daysSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender