Tender For Repair To Sofa, Tp Furniture, Hfd For Otm Accn At Nms Under Age (I) Nabagram
Tender Value
9 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
14 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Murshidabad → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Sofa, Tp Furniture, Hfd For Otm Accn At Nms Under Age (I) Nabagram
BOQ
| Sl. No. | Item Description |
| 1 | Sofa set 2 Seater (Drg No FD-281 |
| 2 | Removing of old worn out u/s front leag of sofa set 2 seater and providing/fixing new one made of teak wood seasoned in existing shape, all as directed by Engr-in-Charge and shown on drg. |
| 3 | Removing of old worn out u/s rear leag of sofa set 2 seater and providing/fixing new one made of teak wood seasoned in existing shape, all as directed by Engr-in-Charge and shown on drg. |
| 4 | Removing of old worn out u/s front rail of sofa set 2 seater and providing/fixing new one made of teak wood seasoned in existing shape, all as directed by Engr-in-Charge and shown on drg. |
| 5 | Removing of old worn out u/s back rail of sofa set 2 seater and providing/fixing new one made of teak wood seasoned in existing shape and size, all as directed by Engr-in-Charge and shown on drg. |
| 6 | A Repair to Sofa 2 seater by replacing springs, hessain cloth, cord cotton 3mm for binding to sofa spring, coir fibre, cotton cloth, wodden parts and tapestry cloth, 12mm thick plain foam to be provided to seat and back all as shown on drawing or as directed by Engr-in-ChargeNote :- Rate of tapestry cloth should not be less than Rs 450/RM as approved |
| 7 | Sofa set 3/5 Seater (Drg No FD-281) |
| 8 | Removing of old worn out u/s front leag of sofa set 3 seater and providing/fixing new one made of teak wood seasoned in existing shape, all as directed by Engr-in-Charge and shown on drg. |
| 9 | Removing of old worn out u/s rear leag of sofa set 3 seater and providing/fixing new one made of teak wood seasoned in existing shape, all as directed by Engr-in-Charge and shown on drg. |
| 10 | Removing of old worn out u/s front rail of sofa set 3 seater and providing/fixing new one made of teak wood seasoned in existing shape, all as directed by Engr-in-Charge and shown on drg. |
| 11 | Removing of old worn out u/s back rail of sofa set 3 seater and providing/fixing new one made of teak wood seasoned in existing shape and size, all as directed by Engr-in-Charge and shown on drg. |
| 12 | Repair to Sofa 3/5 seater by replacing springs, hessain cloth, cord cotton 3mm for binding to sofa spring, coir fibre, cotton cloth, wodden parts and tapestry cloth, 12mm thick plain foam to be provided to seat and back all as shown on drawing or as directed by Engr-in-ChargeNote :- Rate of tapestry cloth should not be less than Rs 450/RM as approved |
| 13 | Stool Dressing (Drawing No FD-374) |
| 14 | Removing of unsv/ broken top long rail from frame of stool dressing and providing/fixing with new Ist class Indian seasoned teakwood rails including drilling of cane holes @ 12.5mm c/c.The loose joints will tightening in the suitable bamboo’s pins and glue to the stool dressing duly french polished all as specified and shown on drg. |
| 15 | Removing of unsv/ broken top short rail from frame of stool dressing and providing/fixing with new Ist class Indian seasoned teakwood rails including drilling of cane holes @ 12.5mm c/c.The loose joints will tightening in the suitable bamboo’s pins and glue to the stool dressing duly french polished all as specified and shown on drg. |
| 16 | Removing of unsv/ broken legs from frame of stool dressing and providing/fixing with new leg Ist class Indian seasoned teak wood in size to stool dressing duly french polished all as specified and shown on drg. |
| 17 | Removing of unsv broken stiffners from frame of stool dressing and providing/fixing with new Ist class Indian seasoned teak wood in size to stool dressing duly french polished all as specified and shown on drg. |
| 18 | Removal of existing worn out painting from exposed metal surfaces including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint black color over a coat of red oxide primer along with S& F of hard plastic cover for back rest supporting metal frame, rest all as directed by Engr-in-Charge. |
| 19 | Chair revolving (TP) |
| 20 | S&F in repairs to nylon twin castor wheel of size 50mm dia as per sample of Chair revolving after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge. |
| 21 | S&F in repairs to 26\\" padestal assembly made of Statinless Steel of Chair revolving after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge. |
| 22 | S&F in repairs to leathertte cloth of approved shade and texture (Rate should not be lower than Rs 650 per RM) for seat and back of Chair revolving after and including removing the old unserviceable one carefully without damaging the adjoining parts and exactly matching the stiching and finish of chair pattern, rest all as directed by Engr-in-Charge. Note : Seat and back should be provided with transparent plastic dust sheet cover |
| 23 | S&F in repairs to Polyurethane foam of 50 mm thick of density 40 best quality and other foam attachments so as to maintain contour for seat and back of Chair revolving after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge. |
| 24 | S&F in repairs to gas lift rod of Chair revolving after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge. |
| 25 | S&F in repairs to arm rest of Chair revolving to match the chair pattern after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge. |
| 26 | S&F in repairs to tilt & lift mechanism assembly of Chair revolving after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge. |
| 27 | S&F in repairs to high quality plastic tower belly of Chair revolving after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge. |
| 28 | Removal of existing worn out painting from exposed metal surfaces including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint black color over a coat of red oxide primer along with S& F of hard plastic cover for back rest supporting metal frame, rest all as directed by Engr-in-Charge. |
| 29 | Table SS Top (TP) |
| 30 | S&F in repairs drawers made of 20 gauge MS Sheet duly finished withstandard workmanship for Table SS top including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 31 | S&F in repairs ss work top of Table SS top with 1.00 mm thick MS sheet prelaminated particle board one rest all as shown on drg and as directed by Engr-in-Charge. |
| 32 | M & L for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of Olive Green synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 33 | S&F in repair to leg Made out of square MS pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 34 | Book case steel (Drg No FD-1028) |
| 35 | S&F in repairs to shelves made of 1.00 mm thick MS sheet made to shape of Book case steel , rest all as shown on drg and as directed by Engr-in-Charge. |
| 36 | S&F in repairs to 3mm thick pane glass of of Book case steel , rest all as shown on drg and as directed by Engr-in-Charge. |
| 37 | S&F in repairs to 1.00 mm thick MS frame alround of glass shutter of Book case steel , rest all as shown on drg and as directed by Engr-in-Charge. |
| 38 | S&F in repairs to lock for glass shutter of Book case steel , rest all as shown on drg and as directed by Engr-in-Charge. |
| 39 | S&F in repairs to handle for glass shutter of Book case steel , rest all as shown on drg and as directed by Engr-in-Charge. |
| 40 | Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge. |
| 41 | Trestle SR Iron/Steel (Drg No FD-1043) |
| 42 | M&L for spot welding of broken joints 25mm to 75mm including preparation of surface and applying two coat of Olive Green/ black synthetic enamel paint over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 43 | S&F in repair to 40x40x6 mm L- Iron of required length/size to be fixed after with and including dismantling the damaged part of frame carefully without disturbing the adjoining parts of Trestle SR Iron/Steel , rest all as shown on drg and as directed by Engr-in-Charge. |
| 44 | Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green/ black over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge. |
| 45 | Book shelf open small steel (Drg No FD-69) |
| 46 | S&F in repairs to shelves made of 1.25 mm thick MS sheet made to shape of Book shelf open small steel , rest all as shown on drg and as directed by Engr-in-Charge. |
| 47 | S&F in repairs to GI bolt machine threaded with hexagonal or square or round head fixed with washer and nut to fixing the cleat of of Book shelf open small steel , rest all as shown on drg and as directed by Engr-in-Charge. |
| 48 | Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge. |
| 49 | Table Dressing Gents (Drg No FD-280) |
| 50 | Removing of unsv/old defaced mirror, unsv back plywood of mirror frame of table dressing gents and providing new sheet glass electro-copper plated mirror 5 mm thick and new plywood commercial BWR grade 6 mm thick 5 ply for back side of mirror frame and fixing to table dressing gents including french polishing to frame all as directed and specified and shown on drg. |
| 51 | Removing of unsv/ chipped/old Pre laminated sheet from the top, side & drawwer facing of table dressing gents and providing new pre laminated sheet natural teak finish 1 mm thick on top, sides and drawer facing and new timber Ist class Indian seasoned teak wood beading 4 mm thick and fixing to box of table dressing gents all as directed and specified and shown on drg. |
| 52 | Removing of unsv/ broken plywood and providing new plywood commercial BWR grade 6 mm thick 5 ply to the drawer bottom of table dressing gents all as specified and shown on drg. |
| 53 | Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge. |
| 54 | Hat Stand with Mirror (Drg No FD-223) |
| 55 | Removing of unsv/old defaced mirror and providing new sheet glass electro-copper plated mirror 5 mm thick and fixing to Hat stand including French polishing all as specified and shown on drg. |
| 56 | Removing of unsv/broken Plywood and providing New plywood commercial BWR Grade 4 mm thick 3 ply to back of Hat stand all as specified and shown on drg |
| 57 | Removing of unsv/ broken peg and providing new brass peg and fixing to Hat stand with metal screws all as specified and shown on drg |
| 58 | Table dinning 8 persons |
| 59 | Replacement of unsv top of table dinning 8 pers providing new top made out of 18 mm thick pre laminated particle board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg. |
| 60 | Replacement of unsv Leg (size 75x40x760 mm) of Table dining 8 pers and providing new leg made out of 1st class teak wood including tightening the frame , rest all as shown on drg and as directed by Engr-in-Charge. |
| 61 | Replacement of unsv Middle stiffener (size 100x25x900 mm) of Table dining 8 pers and providing new stiffener made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge. |
| 62 | Preparation of surface by remove of existing polishing & Painting mark scratchs from all exposed wooden surfaces to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by engineer-in-Charge. |
| 63 | Form With Back (Drg No FD-78) |
| 64 | Taking out old unserviceable seat of from with back and S&F new plank size (1800x150x18mm) one seat and back of form with back with nut and bolt with washer On size 65x6mm. Plank should be made of lst class hard wood well seasoned free from all knots & crecks all as shown in drawing complete all as specified. |
| 65 | Taking out old unserviceable MS conduit pipe of Form with back and S&F new MS conduite pipe (25x25x2mm thick) on the same place by welding including one coat of back colour synthetic enamel painting of all steel surface complete all as specified. |
| 66 | M&L for preparing old painted steel surface of form with back (FD-78,) with one coats of synthetic enamel paint complete all as specified. |
| 67 | Form With Back (Drg No FD-77(M) |
| 68 | Taking out old unserviceable seat of from without back and S&F new plank on seat of form wiout back with nut and bolt with washer of size 65x6mm. Plank should be made of lst class hard wood well seasoned free from all knots & crecks all as shown in drawing complete all as specified. |
| 69 | Taking out old unserviceable MS conduit pipe of Form without back and S&F new MS conduite pipe (25x25x2mm thick) on the same place by welding including one coat of back colour synthetic enamel painting of all steel surface complete all as specified. |
| 70 | M&L for preparing old painted steel surface of form without back (FD-77M,) with one coats of synthetic enamel paint complete all as specified. |
| 71 | Table Centre (Drg No FD-274) |
| 72 | Replacement of unsv top of Table center providing new top made out of 18 mm thick pre laminated particle board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg. |
| 73 | Replacement of unsv Leg (size 60x30x400mm) of Table center and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge. |
| 74 | Replacement of unsv Long rail of Table center and providing new long rail made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge. |
| 75 | Replacement of unsv stiffener (size 50x20x450 mm) of Table center and providing new stiffener made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge. |
| 76 | M&L for preparing old painted steel surface of form table centre with one coats of synthetic enamel paint complete all as specified. |
| 77 | Chair dining JCOs/ORs (Drg No FD/MAP/11/05) |
| 78 | Removing of unsv / broken rear legs and providing new legs made out of 1st class hardwood Indian seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polished for chair dinning complete all as shown on drg and as specified. |
| 79 | Removing of unsv / broken front legs and providing new legs made out of 1st class hardwood Indian seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polished for chair dinning complete all as shown on drg and as specified. |
| 80 | Removing of unsv broken back rest and Providing/ fixing with new 1st class Indian seasoned teak wood back rest duly French polished for chair dinning all as shown on drg and as specified. |
| 81 | Removing of unsv/ broken stiffeners and providing/fixing with new 1st class Indian seasoned teak wood stiffeners for chair dinning duly French polished all as shown on drg and as specified. |
| 82 | Removing of unsv/broken front/rear rails and providing/fixing with new 1st class Indian seasoned teak wood front/rear rails including drilling of Cane holes for chair dinning duly French polished all as shown on drg and all as specified. |
| 83 | Removing of unsv/broken side rails and providing/fixing with new 1st class Indian seasoned teak wood front/rear rails including drilling of Cane holes for chair dinning duly French polished all as shown on drg and all as specified. |
| 84 | Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green/ black over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge. |
| 85 | Table Steel 900x600mm without drawer (Drg No FD/MAP/11/07) |
| 86 | Remove the old top and providing the new top made out of 18mm partical board one side laminated exteroir gread with 4 mm teak wood brading all around and fixing the same on table in its original position as per drawing and poviding new hard rubber/PVC/Nylon shoes to the bottom of legs.Size of particle board shall be 900x600mm, all as directed by Engr-in-Charge and shown on drg. |
| 87 | Remove Legs (Size 740x60x30mm), all as directed by Engr-in-Charge and shown on drg. |
| 88 | Long rails (740x25x65mm), all as directed by Engr-in-Charge and shown on drg. |
| 89 | Short rails (440x25x65mm), all as directed by Engr-in-Charge and shown on drg. |
| 90 | M&L painting Remove the existing worn out paint from table 900x600mm and applying one coat of synthetic enamell paint black over a coat of primer, all as directed by Engr-in-Charge and shown on drg. |
| 91 | Receiptical large :- Removing of old UNSV Bucket of receiptcal large steel and S&F new bucket on the same place. Bucket should be made of 1mm thick plain GI sheet. Complete all as specified per directed by Engr-in-Charge and shown on drg. |
| 92 | Receiptical Small :- Removing of old UNSV Bucket of receiptcal large steel and S&F new bucket on the same place. Bucket should be made of 1mm thick plain GI sheet. Complete all as specified per directed by Engr-in-Charge and shown on drg. |
| 93 | Side Board (Drg No FD-112) |
| 94 | Removing of unsv top from side board and providing new top made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to side board with glue and metal screws all as specified and shown drg. |
| 95 | Removing of unsv side from side board and providing new side made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to side board with glue and metal screws all as specified and shown drg. |
| 96 | Removing of unsv bottom from side board and providing new base made out of 18mm thick commercial plywood & providing teak wood beading on front side including french poliching complete all exposed wooden surfaces and fixing to side board with glue and metal screws all as specified and shown drg. |
| 97 | Removing of unsv shutter from side board and providing new shutter made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to side board with glue and metal screws all as specified and shown drg. |
| 98 | Removing of unsv drawer from side board and providing/fixing new drawer made out of prelaminated particle board 12mm thick side & back and 18mm thick front wall, 6mm thick commercial plywood 5ply fixed to bottom including teak wood beading all around of drawer top with glue, nails and metal screws where necessary, one Nos chromium plated knob and french polishing complete the all wooden surfaces all as specified and shown on drg. |
| 99 | Removing of unsv back plywood from side board and providing new plywood commercial 6mm thick 5ply fixed to side board with glue and metal screws including french polishing complete to all wooden surfaces all as specified and shown on drg. |
| 100 | Removing of unsv shelf from side board and providing new shelf made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to side board all as specified and shown drg. |
| 101 | Removing of unsv legs frame of side board from bottom and providing new legs frame made out of Indian seasoned teak wood including french ploshing complete and fixed to bottom of side board with glue and metal screws all as directed and specified and shown on drg. |
| 102 | Removing of unsv shutter lock of side board and providing new lock best quality fitted to shutter with duplicate keys complete all as directed and specified and shown on drg. |
| 103 | Removing of unsv handle of side board and providing new CP Stainless steel handle to shutter with duplicate keys complete all as directed and specified and shown on drg. |
| 104 | Table 600x600mm (Drg No FD-293) |
| 105 | Remove the old top and providing the new top made out of 18mm partical board one side laminated exteroir gread with 4 mm teak wood brading all around and fixing the same on table in its original position as per drawing and poviding new hard rubber/PVC/Nylon shoes to the bottom of legs.Size of particle board shall be 600x600mm, all as directed by Engr-in-Charge and shown on drg. |
| 106 | Legs, all as directed by Engr-in-Charge and shown on drg. |
| 107 | Long rails, all as directed by Engr-in-Charge and shown on drg. |
| 108 | Short rails, all as directed by Engr-in-Charge and shown on drg. |
| 109 | M&L painting Remove the existing worn out paint from table 600x600mm and applying one coat of synthetic enamell paint black over a coat of primer, all as directed by Engr-in-Charge and shown on drg. |
| 110 | Rack Rifle 20 Spares :- M&L painting Remove the existing worn out paint from rack rifle and applying one coat of synthetic enamell paint black over a coat of primer, all as directed by Engr-in-Charge and shown on drg. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender