Tender For Addition/ Alteration To Or Md Accn P-321 To P-323 (Ph-Ii) At 2003 Stn Under Ge (Af) Gurgaon
Tender Value
1.24 Crore
Estimated cost
Bid Submission
05 Sep 2026
12 days left
EMD
1.99 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/ Alteration To Or Md Accn P-321 To P-323 (Ph-Ii) At 2003 Stn Under Ge (Af) Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed |
| 3 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint complete all as specified and directed |
| 4 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint complete all as specified and directed |
| 5 | M&L for 30 mm 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain , chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats with wire mesh fitted complete all as specified and directed |
| 6 | M&L for 30 mm thick flush shutter solid core construction with block board and plywood panels commercial type on both side fitted to chowkats complete all as specified and directed |
| 7 | M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 8 | M&L for factory made powder coated anodised aluminium section for frame for door, window and ventilator complete all as specified and directed |
| 9 | M&L for factory made Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed |
| 10 | M&L for factory made powder coated Anodised aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed |
| 11 | S & F plain sheet glass 4.8 mm thick tinted, fixed to aluminium doors/ windows / ventilators complete all as specified and directedNote:- Beading/rubber packing is included in the rates for aluminium sections above.) |
| 12 | S&F 125 mm long mild steel Butt hinges, medium weight, cold rolled and fixed complete all as specified and directed |
| 13 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 14 | S&F in aluminium tower bolts 200 mm, stove enamelled black, with bright bolt and fixed complete all as specified and directed |
| 15 | S&F 150 mm size Aluminium handles, oval type, stove enamelled black, ISI marked complete all as specified and directed |
| 16 | Supply & fix factory made solid panel moulded PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet & edges to printed to match with printed sheet, reinforced with MS Square tube, complete all as specified and directed |
| 17 | S & F Factory Made Solid PVC Moulded Door Shutter , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame complete all as specified and directed. |
| 18 | S&F in repair tubular towel rail 20mm dia type brass chromium plated 600mm long between flanges complete all as specified and as directed |
| 19 | Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles complete all as specified and directed |
| 20 | M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed |
| 21 | M&L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM (1:4) complete all as specified and directed |
| 22 | Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 23 | M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed. |
| 24 | Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement complete all as specified and directed |
| 25 | M&L Rendering 15 mm thick cement plaster on fair faces of stone masonry or brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed (Note : edge/face of the chajjas, where damaged, shall be repaired and is included in this item.) |
| 26 | M&L for Rough cast plaster over old plasteres surface of brick walls size 6mm with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even complete all as specified and directed |
| 27 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint over new/old surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed |
| 28 | M&L for preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed. |
| 29 | M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and directed. |
| 30 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed. |
| 31 | M&L for Cement concrete type C-1, 1:3:6 (using 40mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and smooth complete all as specified and directed. |
| 32 | M&L for 75 mm thick PCC ,type D-2 1:4:8 (20 mm graded aggregate) in flooring cmplete complete all as specified and directed |
| 33 | M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris from the premises complete all as specified and directed |
| 34 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 15mm screed bed or bedding layer CM 1 : 6 complete all as specified and directed. |
| 35 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles including 10 mm thick rendering CM 1 : 4 complete all as specified and directed. |
| 36 | M & L glazed coloured (digital/printed/design) ceramic tiles in vertical surface 450 mm x 300 mm x 7mm thick or set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed |
| 37 | M&L for Chequered cement concrete tiles glossy finish of size (min.)20cm x 20cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors with screed bed flooring complete all as specified and directed |
| 38 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed |
| 39 | M&L 16-18 mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15 mm thick cement screed/rendering in CM 1:4 including Roughening surfaces of old/new concrete floor/wall by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm complete all as specified and directed |
| 40 | M&Lfor Round chamfering, to the edges of granite n.exc 15mm wide on granite stone shelves complete all as specified and directed |
| 41 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia complete all as specified and directed |
| 42 | M&L cutting chases pinning in brick mass and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth complete all as specified and directed |
| 43 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia complete all as specified and directed |
| 44 | S&F 20 mm outer dia bore CPVC tubes with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed |
| 45 | S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed |
| 46 | S&F in repair Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated complete all as specified and directed |
| 47 | S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 48 | S & F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread complete all as specified and directed |
| 49 | S&F in repair 15mm bore pillar cock fancy type chromium plated, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed. |
| 50 | S&F in repair 5.5 mm thick mirror(600 x 450 mm size minimum) with moulded edge with chromium plated brass screws on each corner or as required and cup washers complete all as specified and directed |
| 51 | S&F in repair Vitreous china squatting pan (orissa pattern) size 580 X 440 mm, white, complete including fixing to trap, pan including all joints and making good the floor complete all as specified and as directed. |
| 52 | S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed |
| 53 | S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 54 | Dismantling water tanks of any capacity and removing to store complete all as specified and directed |
| 55 | M&L for Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed. |
| 56 | S&F in repair 15 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15 mm bore complete all as specified and directed |
| 57 | S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed |
| 58 | S&F in repair stop valves/angle valves brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 59 | S&F in repair 100mm PVC soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints including any type of fittings( as in bedn, elbow etc) complete all as specified and as directed |
| 60 | S&F in repair kitchen plate rack stainless steel 1 mm thick of size 90cmx90cm (weight not less than 8kg)complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed |
| 61 | M&L in repair for CI floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and as directed |
| 62 | M&L for Sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12cm wide or corner shelf of dia 25 cm min. with chromium plated bracket guard and railing complete all as specified and directed |
| 63 | S & F of Godrej pattern mild steel cup board with shutter made out of 1.0mm M.S. sheet 60cm depth sides incl with back & 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings with locking arrangement and handle etc all as per. Godrei Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zine chromate primer complete. (Only front face of (cupboard to be measured), including taking down old unserviceable cupboards complete all as specified and as directed. |
| 64 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm padding as roof/subbase , surface finished even and smooth in slope if required without using extra cement complete all as specified and as directed |
| 65 | Taking down carefully existing bitumen tarfelt including plaster and roughning the surface cleaning the surface and removing of the rubbish to a out of MOD land complete all as specified and as directed |
| 66 | 15mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified and as directed |
| 67 | M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30liter per sqm conforming to IS 3384-1986 (b) 3mm thick APP polymeric membrane minimum weighing 3 Kg/Sqm (one layer) laid by torch application method with over laps of 100 mm joints of traverse direction and 75 mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company (c) Applying two coat of aluminium paint / waterproof paint paint complete all as specified and directed. |
| 68 | Supply only liquid water proofing compound complete all as specified and as directed |
| 69 | S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed. |
| 70 | S&F in repair Brass chromium plated shower rose 125 size including fixing to steel with necessery joints/fittings complete all as specified and directed. |
| 71 | Taking out carefully the existing burnt sub main wiring of size 4 Sqm / 6 Sqmm PVC insulated multi stranded aluminum/copper conductor cable along-with earth continuity conductor from the PVC / rigid steel, concealed/surface conduit and making good the distubed surface all as specified and directed. |
| 72 | Taking down carefully point wiring (Light, fan, socket) complete including fittings such as switches, Ceiling roses, pendants, regulator, sockets etc removing from site of work and making good to the disturbed surfaces of walls/floors etc all as specified and directed Note:- Temporary power supply shall be provided by contractor. |
| 73 | Supply and laying Sub main wiring complete with 03 runs (Phase, Neutral & Earthing colour code) of single core 4 sqmm fire retardant low smoke (FRLS) PVC insulated copper conductor cable multistranded and sheathed LT 1100 V grade drawn through and including non metalic regid PVC medium conduit & conduit 20 mm dia ISI marked and allaccessories including cutting chasing in walls for concealed wiring using mechine and making good the disturbed surface complete all as specified and directed Note :- 2 run of 4 sq mm , 1 run of PVC conduit & 1 run of 4 sqmm cable shall be measured as single unit length. |
| 74 | Supply and laying Sub main wiring (concealed) complete with three single core 6 sqmm fire retardant low smoke (FRLS) PVC insulated unsheathed multi stranded copper conductor cable LT 1100 V grade drawn through in 20 mm dia non metalic regid PVC medium conduit and conduit accessories including 6 sqmm fire retardant low smoke (FRLS) PVC insulated unsheathed multi stranded copper earth cable connected to common earth dolly complete including cutting chasing in walls for concealed wiring using mechine and making good the disturbed surface complete all as specified and directed Note :- 3 run of 6 sq mm , 1 run of PVC conduit & 1 run of 6 sqmm cable shall be measured as single unit length. Please Enable Macros to View BoQ information |
| 75 | Supply and laying Sub main wiring (concealed) complete with three single core 6 sqmm fire retardant low smoke (FRLS) PVC insulated unsheathed multi stranded copper conductor cable LT 1100 V grade drawn through in 20 mm dia non metalic regid PVC medium conduit and conduit accessories including 6 sqmm fire retardant low smoke (FRLS) PVC insulated unsheathed multi stranded copper earth cable connected to common earth dolly complete including cutting chasing in walls for concealed wiring using mechine and making good the disturbed surface complete all as specified and directed Note :- 3 run of 6 sq mm , 1 run of PVC conduit & 1 run of 6 sqmm cable shall be measured as single unit length. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender