Tender For Welcome Maintenance And Misc B/R And E/M Works For Offrs Md Accn Under Age B/R Ludhiana
Tender Value
40 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
19 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance And Misc B/R And E/M Works For Offrs Md Accn Under Age B/R Ludhiana
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A' |
| 2 | M&L for prepration of old decorated plastered or un-plastered surface of walls by brooming down or steel wire brushing to remove all loose dirt, dust, all loose scales of lime wash and foreign matters; scrapping down smoke soots, moulds, moss and efflorescent salts & trading oil and greasy spots, removing of nails, making good holes, cracks with lime putty/ plaster of paris and applying two coat of white wash with fibre brushes complete all as specified and directed |
| 3 | All as per serial item No. 02 here-in-before but on ceiling surface. |
| 4 | M&L for preparation of old decorated plastered surfaces of walls after complete removal of existing treatment by fine sand paper/ abrasive paper and dusting off to achieve even and smooth surfaces, scrapping down smoke soots, moulds, moss and efflorescent salts and trading oil and greasy spots, removing of nails, making good holes, cracks with lime putty/ plaster of paris, again rubbing down with sand paper to make the surface even and smooth and applying two coat of oil emulsion distemper (white/tinted) over 3 mm thick wall care putty filling with fibre brushes complete all as specified and directed. |
| 5 | M&L for preparation of old surfaces of wall and applying two coat of oil emulsion distemper complete all as specified and directed. |
| 6 | M&L for prepration of old painted surfaces of wooden or wood based materials of any description not otherwise described, exceeding 10 cm width or girth, by removing dust, dirt or any extraneous material, flat portion shall be smoothed with abrasive paper if requried, nails and joints etc shall be filled with paint and applying one coat of synthetic enamel paint with fibre brushes complete all as specified and directed. |
| 7 | All as per serial item No.5 here-in-before but on steel surfaces. |
| 8 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above gd level).Complete all as specified and directed. |
| 9 | M&L 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors finished even and fair complete all as specified and directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified & directed. |
| 11 | M&L non skid joint free ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed. |
| 12 | Ditto item No 10 as in skirting over rendering 10 mm thick in cement mortar 1:4 |
| 13 | M&L vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tile n. exc. 0.42 sqm laid in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) including necessary cutting as per site requirement complete all as specified and directed. |
| 14 | Ditto item No 12 as in skirting over rendering 10 mm thick in cement mortar 1:4 |
| 15 | M&L Glazed ceramic coloured tiles (300x450mm) x 7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match the shade of tile over 10mm thick rendering of in cement mortar 1:4 all as specified and directed. |
| 16 | Demolition of cement concrete (unreinforced) in sunken portion excceding 15cm thickness in any description complete all as specified and directed. |
| 17 | M&L PCC (1:5:10) type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed. |
| 18 | M & L providing APP based polymeric membrane minimum weiging 3 KG/Sqm and minimum 3mm thick reinforced with polyster non wove fabric ( wt not less than 150 gms/sqm) land on after applying evenly bitumen tack coat industrial Bitumen 85/25 @ 1.2 Kg /Sqm complete all as specifed and directed. |
| 19 | M&L rendering 15mm thick on brick work or concrete surface in cement mortar (1:3) and finished even and smooth without using extra cement complete incl water proofing compund all as specified & directed. |
| 20 | M&L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, sides of ruonded or chamfered on edges of sunken floor complete all as specified & directed. |
| 21 | S&F in repair 32mm dia GI pipe in short length 450mm long beveled cut a both ends by making hole in wall sunken portion approx above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surfaces complete all as specified & directed. |
| 22 | Taking down steel water tubes of size 15mm bore and connection including cleaning for refixing or removal from site complete, all as specified & directed. |
| 23 | Taking down steel water tubes of size 20mm bore and connection including cleaning for refixing or removal from store complete, all as specified & directed. |
| 24 | S&F 15mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. |
| 25 | -ditto item no 23 but 20mm bore. |
| 26 | Supply & fixing in repairs bib tap cast copper alloy chromium plated fancy type with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed. |
| 27 | M&L cuting chases pining in making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10cm but n exc 20cm girth complete, all as specified & directed. |
| 28 | Supply & fixing in repairs chromium plated stop valve concealed type with long shank, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for unions suitable for size 15mm bore complete, all as specified & directed. |
| 29 | S&F 15mm bore stop valve/angle valve cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles fixed in repairs all as specified and directed. |
| 30 | Supply & fixing in repairs pillar tap cast copper alloy with capstan head, chromium plated,fancy type screwed down, high pressure with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified and directed. |
| 31 | Supply & fixing PVC connection 15mm size 600mm long with PTMT nuts complete all as specified and directed. |
| 32 | S&F PVC valve less, syphonic action type low level flushing cistern of capacity 10 Ltrs with inlet, ball valve, float and handle and fixed to IWC on existing brackets, fixed in repairs all as specified and directed. |
| 33 | S&F in repair plastic water closet seat cover of White colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed. |
| 34 | S&F in replacement vitreous china wash down water closet pan (pedestal pattern) white with trap / wall mounted including connection to existing out joint pipe, flushing pipe or cistern, antisyphonage pipe, including making good to floor etc complete all as specified and directed. |
| 35 | S & F in repair vitreous china wash basin, white, flat back of size 550mm x 400mm fixed on existing brackets, including 32mm bore CP waste coupling, PVC waste pipe, inlet & outlet, chrimium plated PVC pipe etc, complete all as specified and directed. |
| 36 | Supply and fixing in repair chromium plated shower rose 125mm size with or without swivel joints including fixing to 15mm bore pipe complete all as specified and directed. |
| 37 | S & F in repairs ball Brass valves high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 20mm dia complete all as specified and directed. |
| 38 | Supply & fixing in repairs stop valve cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for unions suitable for size 20mm bore complete, all as specified and directed. |
| 39 | S&F in repair 600mm x 450mm size bevelled edge mirror of selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 40 | Supply & fixing in replacement vitreous China squatting pan 'Orissa' pattern of size 580mm x 440mm white with integral foot rests including lime concrete for fixing the trap and making connection to trap and flush pipe and making good the floor to existing specifications complete all as specified and directed. |
| 41 | Supply & fixing brass chromium plated tubular towel rail , 20mm dia D-type, 60cm long between flanges all as specified and directed. |
| 42 | S&F in repair 32 mm bore PVC waste pipe complete all as specified and directed. |
| 43 | S&F in repair 40 mm bore PVC waste pipe complete all as specified and directed. |
| 44 | S&F in repair brass chromium plated jet for pedestal water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed. |
| 45 | S&F PVC (SWR) floor trap of 75mm outlet plain with grating including jointing with solvent cement complete all as specified and directed. |
| 46 | S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers including cantilever cast iron brackets connecting union etc overall size 915mmx460mm with bowl size 410mm x 330mm x160mm all as specified and directed. |
| 47 | S&F in reapair rotational moulded polythylene water strarge tanks 1000 ltr (Cylinderical vertical with closed top ) hoisted and fixed in position incl dismantling existing tank all as specified and directed. |
| 48 | S&F in repair Rotational moulded polythylene water strarge tanks 500 ltr (Cylinderical vertical with closed top ) hoisted and fixed in position incl dismantling existing tank all as per specified in SSR Pt-1. |
| 49 | Disconnecting existing tanks of cap exc 500 ltrs & n.exc 1000 Ltrs, setting aside (or lower ing if required) for repairs, cleaning, etc. and hoisting if required re- connecting and re-fixing in position and Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc. |
| 50 | Disconnecting existing water tanks, for repairs, cleaning and removing all scale and dirt etc from tanks, and from mouth of circulating pipes etc and reconnecting in same position, of capacity exc 250 ltrs and not exc 500 ltrs each etc complete all as specified and directed . |
| 51 | S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe (minimum weight 15mm-90gms) complete all as specified and directed. |
| 52 | S&f in repair chromium plated grating 125mm dia circular and fixing with cement Concrete 1:2:4 on nahani trap or floor trap complete, all as specified and directed. |
| 53 | S & F in repairs waste coupling PTMT 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed. |
| 54 | Ditto all as per item No 52 Above but 40mm dia complete all as specified and directed. |
| 55 | S&F in repairs PVC kit for double action valveless syphonic action type low level flushing cistern with inlet, ball valve, float and handle fixed on existing cistern complete all as specified and directed. |
| 56 | Hacking out old broken glass (any thickness, size, quality or description) from steel or wooden frames or stone, concrete or brick surroundings; glazing with putty or fixed with beads complete all as specified and directed. |
| 57 | Supply & fixing, sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5sqm in each pane complete all as specified and directed. |
| 58 | Supply & fixing, figured glass 4mm thick pin headed type glazing with oil putty in squares n. exc. 0.5sqm in each pane complete all as specified and directed. |
| 59 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50sqm but not exceeding 4.00sqm each and removing from site all as specified and directed. |
| 60 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50sqm each and removing from site all as specified and directed. |
| 61 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified and directed. |
| 62 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening after earing out complete all as specified and directed. |
| 63 | Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 64 | Supply and fixing factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed. |
| 65 | Supply and fixing 1.25mm thick pressed steel frame size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 66 | Supply and fixing 1.25mm thick pressed steel frame size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 67 | Supply & fixing, 35mm thick plain framed panelled shutters (two number of panels) of 2nd class hard wood with lock rail and panel inserts of 9mm thick BWP commercial ply, the size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated all as specified and directed. |
| 68 | Supplying and fixing glazed and skeleton shutter, 35mm thick of 2nd class hard wood open rebated and prepared to receive glass, gauge etc., without sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members as specified in clause 8.24 (a) of MES Schedule (Part-I), and fitted to chowkhats complete all as specified and directed. |
| 69 | Dismantling wrough iron or mild steel work of any description not otherwise provded all as specified and directed. |
| 70 | M & L framed work as in door or gates of angle or other section with gusset plates, rails, braces etc conforming to Fe 410, Gde E-250 complete all as specified and directed. |
| 71 | Dismantling boarding, any description & fixed in any position all as specified and directed. |
| 72 | M&L Prelaminated particle board thickness 18/19mm, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed |
| 73 | M & L for external teak wood lipping, 6mm thick fixed with nails to prelaminated particle board complete all as specified and directed. |
| 74 | M&L mild steel work conforming to Fe-410-0 or Fe-310 as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, walkways, railing, framed work of water tanks and similar works all as specified and directed. |
| 75 | Supply & fixing in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples all as specified and directed. |
| 76 | Supply & fixing in repair 100mm long butt hinges mild steel medium weight cold rolled complete all as specified and directed. |
| 77 | S&F in repair 150mm aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed. |
| 78 | S&F in repair aluminium handles anodised cast type 150mm long all as specified and directed. |
| 79 | Supply & fixing in repair helical door spring mild steel 300mm, ordinary rat tail rod pattern including roller and roller plate welded to chowkats complete all as specified and directed. |
| 80 | S&F in repair floor door stopper of aluminium of 140 mm alloy body and tongue, anodised, with hard drawn steel spring fixed in floor etc all as specified and directed. |
| 81 | S&F in repair 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed all as specified and directed.. |
| 82 | M&L preparing new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 83 | M&L preparing steel and iron surfaces (new) of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide , zinc chromate primer complete all as specified and directed. |
| 84 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc all as specified and directed. |
| 85 | M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified and directed. |
| 86 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 87 | M&L rendering 6mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 88 | M&L rendering 5mm thick on in cement mortar (1:3) on ceiling/ soffit of slabs finished even and smooth without using extra cement complete all as specified and directed. |
| 89 | M&L rendering 15mm thick on brick work or concrete surface in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified and directed. |
| 90 | M&L preparing newly plastered or pointed surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 91 | M&L preparing newly plastered or pointed surface of wall and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as specified and directed. |
| 92 | M&L prepration of newly plastered or pointed surface of walls and applying two coat of cement base paint complete all as specified and directed. |
| 93 | Supply & fixing in repairs 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to walls complete all as specified and directed. |
| 94 | Supply & fixing in repairs PVC (SWR) bend 110mm bore of any redius complete all as specified and directed. |
| 95 | Supply & fixing in repair 25mm dia fancy type stainless steel chromium plated curtain rod fixed in position with fixing brackets , stops rollers ete complete all as specified and directed. |
| 96 | Supply & fixing in repair plastic finial of 28 to 29mm bore (latest decorated market avlb design) type of any colour /Patern best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and directed. |
| 97 | Supply & fixing in repair mild steel prepainting bracket (latest decorated market avlb design) to hold the curtain rod and fixed to wall (concrete /brick masonary) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the distrubed surfaces complete all as specified and directed. |
| 98 | Supply & fixing in repairs wall Mixer/basin mixer/sink mixer cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified and directed. |
| 99 | S&F in repair PVC bathroom cabinet mirror size 350mm x 450mm all as specified and directed.e (SOAMI ; Carving the future of woods) |
| 100 | S&F in repair Soap dish fixed to walls with chromium plated brass screws(EASYHOME FURNISH soap dish holder) all as specified and directed.. |
| 101 | Supply & fixing in repair Glass self assembly with stainless steel frame Corner glass shelf (Plantex Glass corner shelf) etc complete all as specified and directed. |
| 102 | S&F in repairs stainless steel kitchen plate rack (Quench steel kitchen rack) fixed in wall having overall size 600mm X 750mmX 250mm complete, all as specified and directed.. |
| 103 | S & F in repairs health faucet mild steel cromium plated suitable for 15 mm dia pipe 1.25 metre lomg flexible tube and ABS wall hook including making connections andfixed to in position etc complete all as specified and directed. |
| 104 | S& F in repair door seal (length upto 1.2M) incl fixing with screws, complete all as specified and directed. (measurement done for each door). |
| 105 | S&F in replacement vitreous china one piece / wall mounted including connection to existing out joint pipe, including making good to floor etc complete all as specified and directed.. |
| 106 | Dismantling of stone slabs and tiles of any description or thichness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 107 | M&L, Granite slab 20 mm thick (table rubbed and polished) as in in steps, jambs,pillars, window-cill, cooking platform over and including 15 mm thick bedding layer in cement mortar (1:4) in and pointed with white or colour cement (1:2) using marble dust with admixture to match the shade of granite complete all as specified and directed. |
| 108 | M&L for Complete removal of existing treatment of wall etc by mechanical sander and applying 2mm thick wall putty for smoothness of surfaces incl rubbing and sanding and applying two coat of premium exterior acrylic emulsion paint over a coat of exterior primer on walls and ceiling all as specified and directed. |
| 109 | M&L Endura cement concrete tiles 30cmx 30cmx 10mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed in cement mortar 1:6 all as specified and directed. |
| 110 | Supply only water proofing compound (ISI marked) all as specified and directed. |
| 111 | S & F in repair vitreous china wash basin, white, flat back of size 550mm x 400mm fixed on existing brackets, with pedestal partion including 32mm bore CP waste coupling, PVC waste pipe, inlet & outlet, chrimium plated PVC pipe etc, complete all as specified and directed.. |
| 112 | M&L preparing newly plastered or pointed surface of wall and applying two coats of Plastic emulsion distmeperover 3mm thick wall care putty complete all as specified and directed.. |
| 113 | M&L preparing old plastered or pointed surface of wall and applying two coats of Plastic emulsion distmeper over 3mm thick wall care putty complete all as specified and directed. |
| 114 | Providing and injecting chemical emulsion for post constructional Antitermite Treatment along external wall below concrte or masonary apron using chemical emulsion @ 2.25 litres per linear meter incl drilling and plugging holes etc in apron all as specified and directed. |
| 115 | M&L for repairing RCC projection chajjas, roof, facia etc. by necessary preparation, scraping, cutting, chiseling derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2Kg per Sqm but n.exc 3Kg/Sqm (if required) with or without facia and finished with cement morte 1:3 using coarse sand and work in patches area n.exc 5 Sqm and thickness RCC member n.exc 70mm incl necessary formwork and applying two coats of finishes to match with the existing surfaces at any height complete, all as specified and directed.. (note: wlded mesh to be paid separately) |
| 116 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and directed.. |
| 117 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing all as specified and directed. |
| 118 | M & L for ATT treating the top surface of filled earth @ 5 Ltr of emulsion/square metre of surface all as specified and directed.. |
| 119 | M&L for complete removal of existing treatment of wall and applyng two coats of cement base paint at any height including curing before and after providing of each coat complete all as specified and directed. |
| 120 | Taking down carefully exising unserviceable point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and directed.. |
| 121 | Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed. |
| 122 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified and directed.. |
| 123 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories after cutting chases in wall/ceiling etc, heavy duty ISI marked, with GI Modular sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed. for the following :- |
| 124 | One light point controlled by one, one way switch 5 Amps |
| 125 | One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 126 | One bell point controlled by one, bell switch 5 Amps |
| 127 | One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 128 | One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 129 | All as per item No 122 above but with multistranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3/5 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly. |
| 130 | All as per item No 122 above but with multistranded copper conductor 4 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly. |
| 131 | S & F in replacement of Modular switch one way 6 Amps, 1 module complete all as specified and directed. |
| 132 | S & F in replacement of Modular switch one way 16 Amps, 1 module, with neon indicator complete all as specified and directed. |
| 133 | S & F in replacement of celling rose 3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified and directed. |
| 134 | S & F in replacement of modular step type fan regulator 120 watt two module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and directed.. |
| 135 | S & F in replacement of Modular socket, 6 Amps, 2/3 pin combination 2 module complete all as specified and directed.. |
| 136 | S & F in replacement of Modular socket, 16 Amps, 5 pin combination 2 module complete all as specified and directed.. |
| 137 | S & F in replacement of modular Bell push modular 6 Amps single module completeall as specified and directed. |
| 138 | Suply and fix in replacement of Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply including removal of old unserviceable one complete all as specified and directed. |
| 139 | S & F in replacement of lamp holder, PVC body of brass suitable for batten fitting complete all as specified and directed.. |
| 140 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- |
| 141 | One light point controlled by one, one way switch 5 Amps |
| 142 | One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 143 | One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 144 | One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 145 | Description all as per item No 134 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 146 | All as per item No 134 above but with stranded copper conductor 4 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly. |
| 147 | S & F in replacement of Switch piano flush type, single pole, one way, 5/6 Amp completeall as specified and directed.. |
| 148 | S & F in replacement of Switch piano flush type, single pole, one way, and 15/16 Amp complete all as specified. |
| 149 | S & F in replacement of Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified and directed. |
| 150 | S & F in replacement of Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, piano flush type complete all as specified and directed.. |
| 151 | S & F in replacement of Switch Socket outlet multipurpose having provision for 3/5 pin, 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed. |
| 152 | S & F in replacement of replacemnt step type fan regulator 120 watt suitable for 230 volt 50 Hz AC supply complete all as specified and directed.. |
| 153 | S & F in replacement of Bell push 6 Amps single complete all as specified and directed.. |
| 154 | S & F in replacement of Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified and directed. |
| 155 | S & F for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.. |
| 156 | S & F in replacement of sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed. |
| 157 | S & F in replacement of sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.. |
| 158 | S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.. |
| 159 | S & F for MCB tripple pole and neutral rated capacity 63 A, 415V breaking capacity 10 KA, C curve complete all as specified and directed.. |
| 160 | S & F for MCB Single pole and neutral rated capacity 40 amps, 240 Volts breaking capacity 10 KA,C Curve complete all as specified and directed.. |
| 161 | S & F for MCB Single pole and neutral rated capacity 32 amps, 240 Volts breaking capacity 10 KA,C Curve complete all as specified and directed.. |
| 162 | S & F for MCB Single pole rated capacity 5 to 32 amps, 240 Volts breaking capacity 10 KA,C curve complete all as specified and directed. |
| 163 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 4 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with one run of PVC insulated 4 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm cable, one run of 4 sqmm earth cable and one run of PVC heavy duty conduit will be measured as one unit, including taking down old wiring complete all as specified and directed. |
| 164 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with one run of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm earth cable and one run of PVC heavy duty conduit will be measured as one unit, including taking down old wiring complete all as specified and directed. |
| 165 | S & F in replacement of LED 8/10 watt 2 feet white 85lm/W 6500K batten extruded with decorative end caps complete all as specified and directed. Make- Goldmedal/Bajaj/Wipro/ Havells/Philips. |
| 166 | S & F in replacement of Highly efficient LED 9W inverter bulb B22 CDL, 100 lm/W used as a ready replacement for existing LED direct fit lamp complete all as specified and directed. Make- Goldmedal/Bajaj/Wipro/ Havells/Philips. |
| 167 | S & F in replacement of Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire 100 lm/W with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb and removal old existing unsv tube light fitting complete all as specified and directed. Make : Goldmedal Cat part No GL92891W or its equivalent in Wipro/Havells/Philips/Bajaj/Crompton |
| 168 | S & F in replacement of wall mounted LED 3/6 watts bed side lamp fitting with necessary electrical connections complete all as specified and as directed. |
| 169 | S & F in replacement of Decorative wall light fixture made up of Polycarbonate, suitable for 9 W LED lamp B22 base with unbreakable globe suitable for LED bulb and including provosion of inverter LED bulb 9/10 watts complete all as specified and directed. Make- Havells Cat part No -LHFOFWE1TZ1W012 or its equivalent in Wipro, Philips, Bajaj. |
| 170 | Supply and fix in replacement of LED lights fitting 1x 20W, 230V, not less than 110 lm/W AC decorative box type with driver, holder including LED tube light CRCA housing battens are equipped with specially designed Extruded aluminium heat sink, Milky white PC diffuser and Elegantly designed white colored ABS endcaps to enhance the aesthethetics of the luminaire. with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed. Make :- Havells/Gold medal/Philips/Wipro/Bajaj. |
| 171 | M&L for energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-65 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired complete all as specified. Make :- Havells/ Crompton/Bajaj/ Philips |
| 172 | S & F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 4 module including removal of old unserviceable one complete all as specified and as directed. |
| 173 | S & F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 6 module including removal of old unserviceable one complete all as specified and directed. |
| 174 | S & F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 8 module including removal of old unserviceable one complete all as specified and directed. |
| 175 | S & F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 12 module including removal of old unserviceable one complete all as specified and directed. |
| 176 | S & F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 18 module including removal of old unserviceable one complete all as specified and directed. |
| 177 | S & F modular plates white colour with frame of 2 module including removal of old unserviceable one complete complete all as specified and directed. |
| 178 | S & F modular plates white colour with frame of 4 module including removal of old unserviceable one complete complete all as specified and directed. |
| 179 | S & F modular plates white colour with frame of 6 module including removal of old unserviceable one complete complete all as specified and directed. |
| 180 | S & F modular plates white colour with frame of 8 module including removal of old unserviceable one complete complete all as specified and directed. |
| 181 | S & F modular plates white colour with frame of 12 module including removal of old unserviceable one complete complete all as specified and directed. |
| 182 | S & F modular plates white colour with frame of 18 module including removal of old unserviceable one complete complete all as specified and directed. |
| 183 | S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and directed. |
| 184 | M &L Earthing incl earth work complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender