Tender For Construction of Community Hall- Common Facilities Centre At Bhalukpong (Sadbhavan).
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Aug 2026
4 days left
EMD
1.43 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kameng → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Community Hall- Common Facilities Centre At Bhalukpong (Sadbhavan).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in Hill Area in Soil by Mechanical Means |
| 2 | Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres. |
| 3 | Excavation in Hilly Area in Ordinary Rock by Mechanical Means not Requiring Blasting |
| 4 | Excavation in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slopes and disposal of cut material with all lift and lead upto 1000 metres. |
| 5 | Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 6 | a) Ordinary Soil |
| 7 | a) Hard Soil |
| 8 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 9 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 10 | SH: CEMENT CONCRETE |
| 11 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : |
| 12 | a) Foundations and plinth |
| 13 | Walls including attached buttresses, pilasters and their caps and bases and string courses etc.up to floor two level. |
| 14 | Centring and shuttering including strutting proping etc. and removal of form work for: |
| 15 | Walls including attached buttresses, pilasters etc. |
| 16 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering |
| 17 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : |
| 18 | a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 19 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. |
| 20 | a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 21 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. |
| 22 | a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 23 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 24 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement |
| 25 | Centring and shuttering including strutting, propping etc and removal of form work for : |
| 26 | a) Foundation, footings, bases of columns etc. and mass concrete. |
| 27 | b) Column, pillars, posts and struts etc. |
| 28 | c) Lintels, beams, girders, bressumers and cantilevers etc. |
| 29 | d) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 30 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 31 | b) Tar/TMT steel |
| 32 | Brick work with best available local bricks in foundations and plinth in cement mortar 1:6 (1 cement : 6 fine sand). |
| 33 | Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level. |
| 34 | Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth. |
| 35 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 36 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 37 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position. |
| 38 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled MS butt hinges with necessary screws. |
| 39 | a) 38mm thick best available local wood class - B I |
| 40 | Providing and fixing best available local wood glazed shutters for doors, windows and clerestory window using 7.5 kg/Sq.m. (3 mm thick glass panes) including black enamelled MS butt hinges with necessary screws. |
| 41 | a) 30mm thick |
| 42 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 20 mm nominal size). |
| 43 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. |
| 44 | a) Plain Grills |
| 45 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. |
| 46 | a) 300 X 16 |
| 47 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete. |
| 48 | a) 250 x 10 mm |
| 49 | b) 150 x 10 mm |
| 50 | Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete. |
| 51 | a) 125 mm |
| 52 | b) 100 mm |
| 53 | Providing and fixing MS Hooks and Eyes. |
| 54 | a) 200 mm |
| 55 | Steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. |
| 56 | a) In Flats up to 10 mm in thickness |
| 57 | Providing and fixing bolts up to 300 mm in length including nuts and washers complete. |
| 58 | Providing and fixing MS round holding down bolts with nuts and washer plates etc complete. |
| 59 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete. |
| 60 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confiorming to IS : 15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement:4 coarse sand), including grouting the joints with white cement and matching pigments etc.., complete. |
| 61 | b) Size of Tile 600x600 mm |
| 62 | Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confiorming to IS : 15622 of approved make, in all colours and shades, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc.., complete. |
| 63 | b) Size of Tile 600x600 mm |
| 64 | Providing tata durashine colour coated roofing sheet manufactured from zinc/aluminum alloy coated sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses. |
| 65 | a) 0.63 mm thick GI sheet |
| 66 | Providing ridges or hips 60 cm overall in plain tata durashine colour coated roofing sheet manufactured from zinc/aluminum alloy coated sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. |
| 67 | a) 0.63 mm thick GI sheet |
| 68 | Providing and fixing 12 mm thick insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately). |
| 69 | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling. |
| 70 | a) Best local approved quality wood. |
| 71 | Extra for making chamfered edges of beading. |
| 72 | Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand). |
| 73 | a) 100 mm dia pipe |
| 74 | Providing and fixing M.S. Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10 cm x 10 cm x 10 cm of 1 : 2 : 4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc. |
| 75 | a)100 mm diameter pipe |
| 76 | 12 mm cement plaster 1 : 4 (1 cement : fine sand). |
| 77 | 15 mm cement plaster 1 : 6 (1 cement : 6fine sand). |
| 78 | Neat cement punning. |
| 79 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 80 | Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade on old work (one or more coats) to give an even shade. |
| 81 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
| 82 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 83 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 84 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 85 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 86 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 87 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. |
| 88 | Providing and fixing 40 mm dia GI Pipe outlet in cement mortar 1 : 3 (1 cement : 3 fine sand) including cutting and making good the wall. |
| 89 | Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete. |
| 90 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design. |
| 91 | a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 92 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design. |
| 93 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). |
| 94 | b) 15mm nominal bore |
| 95 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work). |
| 96 | a) 20mm nominal bore |
| 97 | Providing and fixing brass bib cock of approved quality. |
| 98 | b) 15mm nominal bore |
| 99 | Providing and fixing brass Stop cock of approved quality |
| 100 | Providing and fixing PVC connection pipe with brass union. |
| 101 | A) 30 cm length |
| 102 | a) 15 mm nominal bore |
| 103 | Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required. |
| 104 | a) WC pan with white plastic seat and lid. |
| 105 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required. |
| 106 | a) Long Pan patten WC Pan |
| 107 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. |
| 108 | Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap. |
| 109 | Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. |
| 110 | a)100mm dia |
| 111 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. |
| 112 | a)100mm dia |
| 113 | Providing and fixing sand cast iron hel rest sanitary bend |
| 114 | a) 100 mm dia |
| 115 | b) 75 mm dia |
| 116 | Loading and Unloading of Stone Boulder/ Stone aggregates/ Sand/ Kanker/ Moorum. |
| 117 | Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage and return trip |
| 118 | Loading and Unloading of Cement / Steel / Structural Steel / RC Pipe /Wooden Logs / Bricks / Bitumen and Timber etc, by Manual Means and Stacking for hill roads. |
| 119 | Cost of Haulage Excluding Loading and Unloading on hill roads. Haulage of materials by tipper excluding cost of loading, unloading and stacking. |
| 120 | i) Surfaced Road |
| 121 | a) Cement, Steel (Lead - 110.00 Km) |
| 122 | b) Bricks (Lead - 110.00 Km for Hill Road) |
| 123 | c) Bricks (Lead - 60.00 Km for Plain Road) |
| 124 | d) Tiles (Lead - 110.00 Km) |
| 125 | e) Sand & Stone boulder & Stone aggregate |
| 126 | (Lead - 15.00 Km) |
| 127 | Internal Electrification & Installation. |
| 128 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 129 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 130 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 131 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 132 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 133 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 134 | 20 mm |
| 135 | Supplying and fixing metal box of following sizes (normal) on surface or recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. |
| 136 | 180 mm x 100 mm x 60 mm deep |
| 137 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 138 | 5/6 A switch |
| 139 | 2 way 5/6 A switch |
| 140 | 15/16 A switch |
| 141 | 3 pin 5/6 amp socket outlet |
| 142 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 143 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 144 | Supplying and fixing brass batten/angle holder including connection etc. as required complete. |
| 145 | SUB HEAD -2 (ACCESSORIES) |
| 146 | Supplying and fixing of brass batten / angle holder on 2\\" x 2\\" PVC board i/c connection etc as reqd. |
| 147 | Supplying and fixing of bulk head fitting suitable for 100 watt lamp complete with accessories i/c connection etc as reqd. |
| 148 | Supplying, installation, testing & commissioning of AC ceiling fan of size 1400 mm sweep i/c electronics regulator etc as reqd. |
| 149 | Supplying and fixing of fan hook of MS plate (35 x 6 mm) with nuts & bolts etc as reqd. |
| 150 | Supplying and fixing following way prewired Single Pole and neutral MCB distribution board of steel sheet, MCB distribution board, 240 volts on surface/ recess complete with tinned copper bus bar,earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) |
| 151 | 6 way, Double door |
| 152 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 153 | 25 amps |
| 154 | 40 amps |
| 155 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 156 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 157 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 158 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
| 159 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 160 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 161 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 162 | (SH: C/o Common Facility Centre) |
| 163 | Excavation in Hill Area in Soil by Mechanical Means |
| 164 | Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres. |
| 165 | Excavation in Hilly Area in Ordinary Rock by Mechanical Means not Requiring Blasting |
| 166 | Excavation in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slopes and disposal of cut material with all lift and lead upto 1000 metres. |
| 167 | Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 168 | a) Ordinary Soil |
| 169 | a) Hard Soil |
| 170 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 171 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 172 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : |
| 173 | a) Foundations and plinth |
| 174 | b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level. |
| 175 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering |
| 176 | Centring and shuttering including strutting, propping etc and removal of form work for : |
| 177 | b) Walls including attached buttresses, pilasters etc. |
| 178 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : |
| 179 | a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 180 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. |
| 181 | a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 182 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. |
| 183 | a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 184 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 185 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20 1 : 1.5 : 3 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 186 | Centring and shuttering including strutting, propping etc and removal of form work for : |
| 187 | a) Foundation, footings, bases of columns etc. and mass concrete. |
| 188 | b) Column, pillars, posts and struts etc. |
| 189 | c) Lintels, beams, girders, bressumers and cantilevers etc. |
| 190 | d) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 191 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 192 | b) Tar/TMT steel |
| 193 | Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth. |
| 194 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 195 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 196 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled MS butt hinges with necessary screws. |
| 197 | a) 38mm thick best available local wood class - B I |
| 198 | Providing and fixing best available local wood glazed shutters for doors, windows and clerestory window using 7.5 kg/Sq.m. (3 mm thick glass panes) including black enamelled MS butt hinges with necessary screws. |
| 199 | a) 30mm thick |
| 200 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 20 mm nominal size). |
| 201 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. |
| 202 | a) Plain Grills |
| 203 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. |
| 204 | a) 250 X 16 |
| 205 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete. |
| 206 | a) 250 x 10 mm |
| 207 | b) 150 x 10 mm |
| 208 | Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete. |
| 209 | a) 125 mm |
| 210 | b) 100 mm |
| 211 | Providing and fixing MS Hooks and Eyes. |
| 212 | a) 200 mm |
| 213 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 214 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confiorming to IS : 15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement:4 coarse sand), including grouting the joints with white cement and matching pigments etc.., complete. |
| 215 | b) Size of Tile 600x600 mm |
| 216 | Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confiorming to IS : 15622 of approved make, in all colours and shades, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc.., complete. |
| 217 | b) Size of Tile 600x600 mm |
| 218 | 12 mm cement plaster 1 : 4 (1 cement : fine sand). |
| 219 | 15 mm cement plaster 1 : 6 (1 cement : 6 fine sand) on the rough side of single or half brick wall. |
| 220 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
| 221 | Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 222 | Interior Walls : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 223 | Interior Walls : Finishing walls with water proofing cement paint of required shade : |
| 224 | a) New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 225 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 226 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 227 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 228 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 229 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. |
| 230 | Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete. |
| 231 | Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. |
| 232 | a) 100 mm dia SW pipes |
| 233 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. |
| 234 | a) 100 mm dia SW pipes |
| 235 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design. |
| 236 | a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm |
| 237 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design. |
| 238 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). |
| 239 | b) 15mm nominal bore |
| 240 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work). |
| 241 | a) 20mm nominal bore |
| 242 | Providing and fixing brass bib cock of approved quality. |
| 243 | b) 15mm nominal bore |
| 244 | Providing and fixing brass Stop cock of approved quality |
| 245 | a)15mm nominal bore |
| 246 | b) 20 mm nominal bore |
| 247 | Providing and fixing PVC connection pipe with brass union. |
| 248 | A) 30 cm length |
| 249 | a) 15 mm nominal bore |
| 250 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required. |
| 251 | a) Long Pattern WC Pan |
| 252 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. |
| 253 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. |
| 254 | a)100mm dia |
| 255 | Providing and fixing sand cast iron hel rest sanitary bend |
| 256 | a) 100 mm dia |
| 257 | b) 75 mm dia |
| 258 | Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 259 | a) 100 x 100 x 100 mm |
| 260 | Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors. |
| 261 | (b) 100 mm inlet and 75 mm outlet |
| 262 | Loading and Unloading of Stone Boulder/ Stone aggregates/ Sand/ Kanker/ Moorum. |
| 263 | Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage and return trip |
| 264 | Loading and Unloading of Cement / Steel / Structural Steel / RC Pipe /Wooden Logs / Bricks / Bitumen and Timber etc, by Manual Means and Stacking for hill roads. |
| 265 | Cost of Haulage Excluding Loading and Unloading on hill roads. Haulage of materials by tipper excluding cost of loading, unloading and stacking. |
| 266 | i) Surfaced Road |
| 267 | a) Cement, Steel |
| 268 | b) Bricks (for Hill Road) |
| 269 | c) Bricks ( Plain Road) |
| 270 | d) Tiles |
| 271 | e) Sand & Stone boulder & Stone aggregate |
| 272 | Internal electrification (Facilities centre) |
| 273 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 274 | Group - C |
| 275 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 276 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 277 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 278 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 279 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 280 | 20 mm |
| 281 | Supplying and fixing metal box of following sizes (normal) on surface or recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. |
| 282 | 180 mm x 100 mm x 60 mm deep |
| 283 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 284 | 5/6 A switch |
| 285 | 2 way 5/6 A switch |
| 286 | 15/16 A switch |
| 287 | 3 pin 5/6 amp socket outlet |
| 288 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 289 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 290 | Supplying and fixing brass batten/angle holder including connection etc. as required complete. |
| 291 | SUB HEAD -2 (ACCESSORIES) |
| 292 | Supplying and fixing of brass batten / angle holder on 2\\" x 2\\" PVC board i/c connection etc as reqd. |
| 293 | Supplying and fixing of bulk head fitting suitable for 100 watt lamp complete with accessories i/c connection etc as reqd. |
| 294 | Supplying, installation, testing & commissioning of AC ceiling fan of size 1400 mm sweep i/c electronics regulator etc as reqd. |
| 295 | Supplying and fixing of fan hook of MS plate (35 x 6 mm) with nuts & bolts etc as reqd. |
| 296 | Supplying and fixing following way prewired Single Pole and neutral MCB distribution board of steel sheet, MCB distribution board, 240 volts on surface/ recess complete with tinned copper bus bar,earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) |
| 297 | 6 way, Double door |
| 298 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 299 | 25 amps |
| 300 | 40 amps |
| 301 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 302 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 303 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 304 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
| 305 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 306 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 307 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 308 | Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 309 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering |
| 310 | P/L RCC 1:2:4 ……… |
| 311 | Centring and shuttering including strutting, propping etc and removal of form work for Foundation, footings, bases of columns etc. and mass concrete. |
| 312 | Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth |
| 313 | 12 mm Cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 314 | 20 mm Cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 315 | Reinforcement of RCC work including bending, binding and placing in position complete |
| 316 | Angle iron post (50 x 50 x 6 mm ) |
| 317 | G.I. barbed wire |
| 318 | G.I. Staples …… |
| 319 | Cost of Haulage Excluding Loading and Unloading on hill roads |
| 320 | a) Cement, Steel, Bricks Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender