Tender For Repairs To Drain, Boundary Wall, Fencing And Hardstanding At G & H Area & Technical Area Garuda At Naval Base Kochi Under Ge(Nw) Kochi
Tender Value
69.90 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
2 days left
EMD
1.29 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Drain, Boundary Wall, Fencing And Hardstanding At G & H Area & Technical Area Garuda At Naval Base Kochi Under Ge(Nw) Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Demoiltion of Brickwork or stone/boulder masonry, build in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles all as specifed and directed. |
| 2 | Demolition of cement concrete (Un-reinforced) in ground floor and pavings n exc. 15 cm thickness (below or above the ground level) and removing to a distance not exc 50 meter all as specified and as directed. |
| 3 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for all as specifed and directed. |
| 4 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embedded in natural ground all as specifed and directed. |
| 5 | Dismantling chainlink fencing, any thickness or mesh, fixed with steel fillet and nut bolt. n.exc 4kg per Sqm all as specified and directed. |
| 6 | Supply only MS galvanised chain link fencing of grid size 50x50x3.10mm dia wire (Weight not less than 3.25 Kg/Sqm) including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and as directed |
| 7 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire all as specified and as directed |
| 8 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface all as specifed and directed. |
| 9 | Demolition of stone slabs and tiles of any description or thickness in floors all as specified and as directed |
| 10 | M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundation/ mass concrete all as specified and as directed |
| 11 | M&L for RCC 1:1.5:3, type A1, using (20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed. |
| 12 | Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundations etc and getting out soft/loose soil all as specifed and directed. |
| 13 | M&L for concrete bed to 150mm bore dia of drain pipes incl packing under and haunching against the sides of the pipes after they are laid and tested in PCC 1:3:6 type C2 using 40mm graded stone aggregate all as specifed and directed. |
| 14 | Returning filling in including spreading levelling watering and well ramming of soil in layers nexc 25 cm thick all as specifed and directed. |
| 15 | Removing excavated material from drains exc 1.50 Km but n exc. 5.0 Km above the starting point depositing where directed completed all as specifed and directed. |
| 16 | S&F 150mm dia reinforced concrete pipes,class NP2, laid and jointed complete with collars all as specified and directed. |
| 17 | S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework conforming to Fe.290.Gde-E-165 all as specified and directed. |
| 18 | M & L for providing precast reinforced cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in cover slab for manholes and similar articles with plain face set in cm 1:6 all as specifed and directed.Note : Reinforcement shall be measured and paid seperately |
| 19 | M&L for reinforced cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like complete all as specified and as directed |
| 20 | Demolition and breaking-up of 150mm nominal dia unserviceable SGW, AC,PVC or re-inforcement concrete, set in cement mortar including PCC haunching complete and removing to a distance not exc 50 meter complete all as specified and directed. |
| 21 | M&L for use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat fair finshed surfaces complete all as specified |
| 22 | M&L for PCC type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 23 | M&L for TMT bars in reinforcement 10mm dia and over cut to length , bend to required shape , cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and as directed. |
| 24 | M&L for TMT bars 5mm dia and over and including 10mm dia in stirrups, spacers and binders etc , cut to length, bent to shape required, including cranking bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 25 | M& L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, Type C1, 1:3:6 (using 20mm graded stone aggregate), complete all as specified and as directed. |
| 26 | Taking down cement plaster on Brick/Concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with watercomplete all as specified and as directed. |
| 27 | M & L, 15mm thick rendering in C.M. 1:4 on fair faces of brick work finished even and fair without using extra cement all as specified and as directed |
| 28 | Material & Labour complete removal of existing surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and as directed. |
| 29 | Restaining rescuring including making good staples etc of barbed wire fencing galvanised two strand, galvanised steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacings including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pin, etc as directed. (Each line wire to be measured) all as specified and directed. |
| 30 | S&F (in repairs)Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and staining and fixing to any type of standard rails strain -ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and as directed (each line wire to be measured.) |
| 31 | S&F in repairs concertina coil of 450mm diameter made out of 2.6mm dia spring steel core wire having zinc coating on core wire 230G/Sqm (min) dipped with corrosion preventive fluid (rusilo 901) of castrol make in white colour and each coil having a minimum 50 turns (circles) and an average weight not less than 8.75 kg (plus of minus 5%) including handle and spike at both ends of coil errected in position on top of compound wall by fixing with MS rod for securing including necessary welding to the MS section etc all as specified and as directed. Note: MS rods willl be measured and paid separately. |
| 32 | S&F angle iron posts and struts in fencing incl cutting tops to shape as directed in fillets (in securing barbered wire etc) incl all necessary incl drilling , bolting and revetting etc.Fe 410 W(Gde-E-250) quality B all as specified and as directed |
| 33 | M&L for mild steel screw bolts (machine made) with hexagonal or square heads at on end and screwed the other, or screwed both ends each screwed end to be fixed with washers and one hexagnal or squre nut, dia 5 to 10mm and length not exceeding 5cm all as specified and as directed |
| 34 | M&L for two coats of syenthic enamel paints on new steel surface over 10cm width or girth over a coat of red oxide primer including preparation of surfaces all as specified and as directed. |
| 35 | M&L for PCC 1:3:6, type C1, using 20mm graded stone aggregate as in foundation filling for and post hole and mass concrete etc all as specified and directed. |
| 36 | S&F mild steel round bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clip all as specified & directed. |
| 37 | M&L for chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick with white cement and pigment, top surface treated with antifungal paint set and jointed and pointed in neat cement slurry with pigment in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed. |
| 38 | M&L for Hard core of Gauge exc. 63mm but n. exc 150mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rolled / rammed to a true surface complete all as specified and as directed. |
| 39 | M&L for 100mm thick cement concrete, 1:4:8, type D2, using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 40 | M&L for 75mm thick plain cement concrete 1:3:6, type C1 using 20mm graded stone aggregate as in path or plinth protection and finishing surfaces of concrete even and fair complete all as specified and as directed. |
| 41 | M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm spreading, levelling and ramming as specified complete all as specified and as directed. |
| 42 | M&L for Machine pressed precast conctete paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 graded with grey cement and pigment complete all as specified and as directed. |
| 43 | All as per Item No 42 above but except machine pressed precast interlocking paver block complete all as specified and as directed. |
| 44 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed. |
| 45 | M&L for 50 mm thick Bangalore stone of size 600mmx600mm including screed bed 15 mm thick in CM 1:6 artificial grass strip 50mm width all around each stone flooring complete all as specified |
| 46 | M&L for PCC, 1:2:4, type B0, using 12.5 mm graded stone aggregate as in mass concrete around the Machine pressed precast conctete paver block or chamfered on edges all as specified and as directed. |
| 47 | Material & Labour for preparation of old external surfaces of wall and applying one coat of Premium acrylic emulsion paint, Alkali & fungal resistance, dirt resistance exterior paint of required shade complete all as specified and as directedMAKE : Apex Ultima Protect/Berger/Nelorac |
| 48 | M&L for PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and directed. |
| 49 | Material and labour for providing plain cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in surface channels and drains all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender