Tender For Providing, Laying, Spreading And Compaction Of 75Mm Thick Wet Mix Macadam (Wmm) Each In Two Layers, 50 Mm Thick Dense Bituminous Macadam (Dbm) And 40 Mm Thick Bituminous Concrete (Bc) Including Cleaning Of Road Surface Applying Prime Coat
Tender Overview
Project Description
Tender for Providing, Laying, Spreading And Compaction Of 75Mm Thick Wet Mix Macadam (Wmm) Each In Two Layers, 50 Mm Thick Dense Bituminous Macadam (Dbm) And 40 Mm Thick Bituminous Concrete (Bc) Including Cleaning Of Road Surface Applying Prime Coat And Tack Coat And Road Marking From Upper Grn To Lower Grn Of 20 Kumaon Incl Sata Bty At Hyms Sumdo From Km 0.00 To Km 3.00 (Net Length 3.00 Km) All As Per Particular Specifications /Mort&H Specification (Fifth Revision) For Surfacing Works Under 108 Rcc/759 Brtf Of Project Deepak In Himachal Pradesh State
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Aug-2026 | Amendment No 1 | Date | 10-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Altitude Between (Below 5101-5400 ) mtr |
| 2 | Providing, laying, spreading and compacting graded stone aggregate grading as per Table-400-13 and satisfying the physical reqmt as per Table No. 400-12 of MORT&H specifications for WMM specifications to a thickness of 75 mm (Each in Two layer), including premixing the material with water to OMC in mechanical mix (Pug Mill) laying in uniform layers in sub base/base course on a well prepared base and compacting with power vibratory roller to achieve the desired density including guarding. |
| 3 | Providing, laying and compaction of DBM 75 mm thick (compacted) over finished non bituminous layer/WMM layer with minimum 4.5% Bitumen (VG-10) content to total mix conforming to MORT&H specifications for Road and Bridge works (Fifth revision) and as specified in particular specification. |
| 4 | Providing and applying primer coat on prepared WMM surface including cleaning of road surface and spraying bitumen emulsion (SS-1 grade) @ 7.50 Kg/10Sqm using bitumen pressure distributor conforming to MORT&H specifications for Road and Bridge works (Fifth revision) and as specified in particular specification. |
| 5 | Providing, laying and compaction of BC 40 mm thick (Compacted) over finished Bituminous surface/DBM layer with minimum 5.4% Bitumen (VG-10) content to total weight of mix conforming to MORT&H specifications for Road and Bridge works (Fifth revision) and as specified in particular specification. |
| 6 | Providing and applying of tack coat on prepared Bituminous surface/WMM layer and DBM layer including cleaning of road surface and spraying bitumen emulsion (RS-1 grade) @ 2.50 Kg/10 Sqm using bitumen pressure distributor conforming to MORT&H specifications for Road and Bridge works (Fifth revision) and as specified in particular specification. |
| 7 | Providing and laying of Road marking with thermoplastic paint 2.5 mm thick conforming to MORT&H specifications for Road and Bridge works (Fifth revision) and as specified in particular specification and as directed by Engineer in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender