Tender For Special Repair To Hosp Auditorium And special Repair Sewage Line At Bldg No. P-91 And special Repair To Bldg No. P-45 (1 To 8 Qtr) Ors Md Accn At Mh Under Ge Dehradun
Tender Value
1.15 Crore
Estimated cost
Bid Submission
03 Sep 2026
24 days left
EMD
1.90 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Hosp Auditorium And special Repair Sewage Line At Bldg No. P-91 And special Repair To Bldg No. P-45 (1 To 8 Qtr) Ors Md Accn At Mh Under Ge Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutter n. exc 1.5 sqm each without taking off shutter from the frame complete. |
| 2 | Taking down Chowkats with shutter of any description exceeding 1.50 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame) complete all as specified and directed. |
| 3 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed. |
| 4 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 5 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 40 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 6 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 7 | Providing and fixing fully automatic double sliding motion sensor operated sliding door of size 1.80x2.10m made of 12 mm thick clear toughened glass complete with aluminum track assembly motorized mechanism, sensor unit, patch fitting floor guide, locking arrangement, emergency break out facility all accessories testing and commissining complete all as specified and directed. |
| 8 | S&F in repair for powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fitting, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below including taking down old/ ventilator and making good of wall surface to match with existing surface complete all as specified and directed. Aluminium section shall be of size as given below:-Frame:- 44.5x44.5mmx 1.08mm thick, Top/ botton rails and middle / side styles of shutter - 44.5x 44.5 mm x 1.08 mm thick Including Glass: 5 mm thick frodted glass fixed with rubber gasket with aluminium beading, necessary aluminium beading,wire gauge incl aluminium gril with frame fixed to by means stainless steel screws complete all as specified and directed. |
| 9 | S&F aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading including taking down unserviceable existing partion etc complete all as specified and directed of following sizes;-Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thickBottom section;-100x44.5x1.22 mm thick |
| 10 | S&F in repair factory made 100 % solid colured wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of density 600 kg per cum manufactured by ISO-9000 certified company using for shutter cilica ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification. |
| 11 | S & F Continuous (Piano) hinges , mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected. |
| 12 | S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 13 | S&F stainless steel handle fency type 100 mm size for kitchen cabinet shutters complete all as specified and directed |
| 14 | S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. |
| 15 | S & F steel window with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bar dovetailes or welded complete al as specified and directed |
| 16 | S & F steel window with side hung shutter including box type hinges with steel handle and steel peg stay complete without glazing bar dovetailes or welded complete al as specified and directed |
| 17 | M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 18 | M&L for one coat of synmthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified. and as directed. |
| 19 | S&F 100 mm size stainless steel butt hinges 204 grade, and fixed with stainless steel screws, complete all as specified and directed. |
| 20 | S&F 200 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed |
| 21 | S&F 150 mm size solid in one piece stainless steel handles, in 304 grade and fixed in stainless steel screws complete all as specified and directed |
| 22 | S&F stainless steel sliding door bolts 204 grade, with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts,and fixed 250mm long complete all as specified and directed. |
| 23 | S&F floor door stopper of alluminium alloy body and tongue anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed. |
| 24 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone concrete bricks surrounds glazed with putty or fixed with beads complete all as specified and directed. |
| 25 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.50sqm each pane.complete all as specified and directed |
| 26 | S&F 4mm thick sheet glass, frosted quality and glazing with oil putty in square exc 0.50sqm each pane.complete all as specified and directed |
| 27 | Repair to steel window /ventilator/ Steel gate etc in any size with easing and adjusting including fittings of any size without taking down and making the windows smooth functional with change of box type of hinges, peg stay , left and right handle, pintal hinges as in gate fixed with weilding and hammering complete all as sepcified and as directed. ( Note : All the necessary fitting such as hinges, Handle, Peg Stay etc are included this item rate quoted by contractor) |
| 28 | S&F in repair Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed. |
| 29 | S&F in repair 25mm dia stainless steel 202 Gde curtain rod /drapery rod with incl brackets, decorative finials at both ends complete all as specified and directed. |
| 30 | Dismantling of timber scantlings 40 Sqcm and over in section in any position and in any situation (unframed work) complete all as specified and directed. |
| 31 | S & F for joist channel angle or tee section fixed independently with out connecting plate as in main and cross beam hip and jack rafters, purline where connected to comman rafter and runing rails and guides etc complete all as specified and directed |
| 32 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old sheets of any description complete all as specified and directed. |
| 33 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed. |
| 34 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed. |
| 35 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in path/hardstanding etc surface finished even and smooth without using extra cement including demolition existing PCC, complete all as specified and directed. |
| 36 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds mitered or stopped ends etc. complete all as specified and directed. |
| 37 | Add or deduct for each 25 mm girth or part thereof over or under 30 cm girth all as directed. |
| 38 | M&L for prepolished chequered cement concrete coloured tiles 30cmx30cmx22-25mm thick, set jointed and pointed in neat cement slurry @ 3.00Kg/Sqm with grey cement and pigment over and including 15mm thick screed bedding layer (1:6) complete all as specified and including dismantling of old tiles complete all as specified and directed |
| 39 | M&L for non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry @ 3.00Kg/Sqm and pointed in white or coloured cement to match the surface of tile laid over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of old tiles complete all as specified and directed |
| 40 | M&L for Glazed ceramic tiles coloured of size 450x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white cement to match over and including 10mm thick rendering in CM 1:4 for receiving tiles as in backing coat including dismantling of old tiles complete all as specified and directed |
| 41 | M&L for Digital Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile size 1200x600 mm in floor etc. set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white or coloured cement to match the surface of tile laid over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 including dismantling of old tiles complete all as specified and directed. |
| 42 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, complete all as specified and as directed. |
| 43 | M&L 18-20 mm thick granite ( of any type) (table rubbed and polished ) in steps, jambs, pillars, window-cills, cooking plateform, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including necessary grinding, rubbing, rounding to exposed edges complete all as specified and directed. |
| 44 | M&L for 20 - 25 mm thick machine cut Kota stone slab as in flooring, staircase step etc over and including 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry @ 3.00 Kg/Sqm mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed. |
| 45 | M&L for 20 - 25 mm thick machine cut Kota stone slab as in vertical surface such as dado, riser etc over and including 10 mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry @ 3.00 Kg/Sqm mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed. |
| 46 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 47 | M & L Hardcore of guage exc 63mm, but nexc 100 mm depositied, spread, and levelled in layers n exc 15 cm thick watered and rolled /rammmed to a ture surface all as specified and directed. |
| 48 | M&L for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment, complete all as specified and directed. |
| 49 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement:3 coarse sand), including making joints with or without grooves (thickness of joints with or without grooves (thickness of joints except at shrap curve shall not to more than 5 mm),including making drainage opening whereeer required complete. |
| 50 | M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) and including demolition of old brickwork complete all as specified and directed. |
| 51 | All As per item no above but except bricks complete all as specified and directed. (Old bricks obtained from demolition shall be re-used) |
| 52 | M&L for brick work with sub class ’B’ bricks old size straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) and including demolition of old brickwork complete all as specified and directed. |
| 53 | Cutting openings through brick / block masonary walls for door, window and other openings or enlarging existing openings, converting window into door opening etc. or cutting out defective brick work for under pinning, including providing fixing and removing shoring complete all as specified and directed. |
| 54 | Forming jambs etc openings etc including cutting toothing and properly bonding into old work also facing, jointing and pointing to match existing work built in cm 1:6 complete all as specified and directed. |
| 55 | Making good under cill or over arches, lintels including all pinning in with cement mortar 1:4 complete all as specified and directed. |
| 56 | M&L for Cutting/grinding and polishing of exterior kota sotne/ terrazzo flooring/granite, etc complete all as specified and directed. |
| 57 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified |
| 58 | M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick & concrete surfaces and finished even and smooth (without using extra cement) including taking down the existing plaster complete all as specified and directed. |
| 59 | M&L for rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound on brick or concrete surface, finished even and fair without using extra cement complete all as specified and directed. |
| 60 | M&L for rendering 10mm thick in cement mortar 1:3 on ceiling or concrete colum , beam etc surface, finished even and fair without using extra cement complete all as specified and directed. |
| 61 | M&L for applying two coats of oil bound distemper in any tint on walls including preparation of new plastered surfaces of walls and finally clean with sand paper complete all as specified and directed. |
| 62 | M&L for applying two coats of oil bound distemper in any tint on ceiling including preparation of new plastered surfaces of ceiling and finally clean with sand paper complete all as specified and directed. |
| 63 | M&L for preparation of wall and applying wall care putty 1 to 1.5 mm thick to make the surface smooth as specified and directed |
| 64 | M & L for preparation of new plaster surfaces of walls and applying two coats of Damp Proof paint on already prepared surface complete all as specefied and directed . |
| 65 | M & L for complete removal of existing treatment of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and washing down with water and applying two coats of exterior paint over a coat of alkali resistant primer complete all as specified and directed. Note - Work will be carried out up to 5th storey |
| 66 | M & L for applying two coats of Damp Proof paint in any tint on old plastered surfaces of walls complete all as specified and directed. Note: Work will be carried out up to 5th Storey. |
| 67 | M&L for applying two coats of oil bound distemper on old decorated plastered or unplastered surfaces of walls on already prepared surface complete all as specified and directed. |
| 68 | S&F Rotational moulded polyethylene(triple layer white) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with 20 mm dia PVC flat valve including dismantling of old water tank and remove from site complete all as specified and directed. |
| 69 | S&F in repairs 20 mm dia ball PVC valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed all as specified and directed. |
| 70 | S&F in repair vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete all as specified and directed. |
| 71 | S&F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including P&S trap connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor, complete all as specified and directed. |
| 72 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern) (cascade) single piece, white including dual wash flushing cistern, Plastic water closet seat, white, closed pattern with flat bottom, and cover etc complete all as specified and directed. |
| 73 | S&F in repair half stall china urinals (wall type) complete incl plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cement and waste pipe etc complete all as specified and directed. |
| 74 | S&F in repair china ceramic partion for urinal fixed with 60 mm long screw complete all as specified and directed. |
| 75 | S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with hand elbow operated handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 76 | S&F in repair 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. |
| 77 | S&F in repair CP brass angle cock 15 mm bore complete all as specified and directed.. |
| 78 | S&F in repair CP health faucet with 1.20 mtr metallic expandable tube & hook complete all as specified and directed. |
| 79 | S&F in repair stainless steel Soap dish of size 125mm complete all as specified and as directed. |
| 80 | S&F in repair 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed. |
| 81 | M&L for high quality looking mirror with fancy type beading fixed to wall with chromium plated screw etc complete all as specified and as directed. |
| 82 | S&F in repair looking mirror in size (450 X 600mm) mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified . |
| 83 | S&F in repair CP Brass 600 mm long towel rack with hook fixed on wall with screw complete all as specified . |
| 84 | S&F in repair corner glass self fixed on wall with steel screw complete all as specified . |
| 85 | S&F in repair stainless steel peg set of Five fixed on screw on wall surface complete all as specified and directed. |
| 86 | Demolition of cement concrete(reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 87 | M&L for RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall,beam and columns in floor, roof landing,, balconies,conopies, deck slab and shelves including formwork etc complete all as specified and directed. |
| 88 | M&L for mild steel TMT bars 10 mm dia and over cut to length and bent to shape required and binding with mild steel wire dia not less than 0.9 mm (annealed) complete all as specified and directed. |
| 89 | S&F for Fluid pattern Acoustic wall Panelling made of high density PET polyester fibre acoustic panels of approved make and design having minimum NRC 0.80 fire retardant properties fixed with screws trims accessories complete all as specified and directed. hollow PVC sheet wall panelling of thickness 24 mm, consisting of panel having size 1220x2440 stuck on inner frame work of 50mm wide strips.The strip shall have in their centre a groove of 6mm width and 1mm depth of sinking the head of the screw used to fixed the strip to the wall vertically at an equal interval of 250mm between two PVC strip. The PVC strip shall be fixed to wall using 65mm long MS screw & through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. |
| 90 | M&L for 15 mm thick acooustic false ceiling in auditorium acooustic ceiling tiles/ panel of approved make make and design having NRC minimum 0.70 suspended from roof/ ceiling by GI suspension system panel sizr 595 mm x 595 mm fixed on walls consisting of approved make acoustic panel made of hogh Density minral fibre /glass wool/ polyster fibre with perforated MDF/ fabric finish surface having NRC not less than 0.75, fixed over aluminum/GE frame aluminum anodised snal grid ceiling of frame of size (600mm X 600mm x 4mm) maint 'T' section of size 36mm X 25 mm X 1.40 mm thick cross'T' section of size 23.50mm X 23.50mmX 1.4mm thick support at ends all along the wall with aliminum anodised angle of size 25mm X 25mm X2mm thick and 1.6 mm dia suspender complete with back insulation, screws, adhsives and edge trims as required Colour or pattern approved by Engr in Charge Gloss Tile made up to ' wooden fiber cement composite 15 mm thick covered with Acoustically Transparent Absorptive microfibers on the frount side with an option of colour size 595/595mm/595x 1195 mm having excellent noise absorption of 0.85 NRC as per ISO 354 Fire rating as per BS 476 Part 5,6 and 7 class 1 and P water resitance and thermal insulated Insulated on T 24 grid system of 0.6 mm thick Main T length minium 3000 mm web minimum 35 mm to be placed at 600 mm web minimum 35 mm inter locking wire support for main T to be taken at every 1200 mm length wise and 600 mm width wise with a backing of 50 mm 1000 GSM THick absorb wool tested as per Fire Retardant IS 15061-2002 ( The frame of ceiling incldued in this item) |
| 91 | Cleaning of existing covered / uncovered (partly / semi or fully filled up) drain, of any opening width and depth by removing and re-fixing of cover-slab (wherever applicable) taking out accumulated silt, mud, earth, rubbish, vegetation etc from the drain and removing the same at a distance exceeding 500 metre but not exceeding 1 Kilometre where directed, washing of the drain with water complete all as directed. |
| 92 | S&F in repair 75mm bore PVC (SWR) pipe 6 Kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and directed. |
| 93 | S&F in repair 110 mm bore PVC (SWR) pipe 6 Kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and directed. |
| 94 | S&F in repair PVC (SWR) bend, 75 mm bore' complete all as specified and directed. |
| 95 | S&F in repair PVC (SWR) bend, 110 mm bore' complete all as specified and directed. |
| 96 | S&F in repair PVC (SWR) junction single, (Single T) equal or unequal, 75 mm bore with oval access door complete all as specified and directed. |
| 97 | S&F in repair PVC (SWR) junction single, (Single T) equal or unequal, 110 mm bore with oval access door complete all as specified. |
| 98 | S & F PVC Cowl 110 mm dia complete all as spcified and directed. |
| 99 | S & F PVC 'S' Trap 110 mm dia any type complete all as specified and directed. |
| 100 | S & F 75 mm dia PVC floor trap plain with grating including jointing with solvent cement of with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggreate complete all as specified and directed. |
| 101 | Cutting chases, pinning in making good to faceings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshedes, shelves, lintels, etc and cutting chase for concealed water tubing or conduit wiring etc and making good cutting exceeding 20 cm girth on brick/ stone wall complete all as specified and directed. |
| 102 | Supply & laying in repairs of 20 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed. |
| 103 | Supply & laying in repairs of 25 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed. |
| 104 | S & F in repair Brass elbow 20 mm dia fixed on CPVC PIPE on wall complete all as specified and directed. |
| 105 | S & F in repair Brass Male/Female threaded adaptor for 20/25 mm dia fixed on GI pipe complete all as spcified and directed. |
| 106 | S & F as in repair CPVC gate valves with left and right handle screwed both ends for CPVC pipe 20 mm bore complete all as specified and as directed |
| 107 | S & F as in repair CPVC gate valves with left and right handle screwed both ends for CPVC pipe 25 mm bore complete all as specified and as directed |
| 108 | M&L for PCC (1:4:8) type D-2 (using 20 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed. |
| 109 | S&F SGSW Pipe 150 mm dia pipes grade 'A' laid in trenches and jointed complete all as specified and directed. |
| 110 | S & F RCPC (Reinforced Cement Polymer Concrete) grating slab on size 900mm X 450mm X 75mm (5 MT) thick fixed in proper position complete all as specified and as directed |
| 111 | S & F FRP Squre Manhole cover with frame of size 300x 300 (5 MT) havey Duty , anti corrosive, non rusting with suitable load bering capacity fixed in proper position complete all as specified and as directed |
| 112 | S & F FRP Squre Manhole cover with frame of size 750x 750 (5 MT) havey Duty , anti corrosive, non rusting with suitable load bering capacity fixed in proper position complete all as specified and as directed. |
| 113 | S & F FRP Squre Manhole cover with frame of size 900x 900 (5 MT) havey Duty , anti corrosive, non rusting with suitable load bering capacity fixed in proper position complete all as specified and as directed. |
| 114 | M & L for providing and fixing stainless steel ( Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nut and bolts complete including fixing the railing with necessary accessories and stainless steel dash fastners, stainless steel bolt etc of required size on top of floor or the side of waist slab with suitable arrangement as per design complete all as specified and as directed. |
| 115 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in any type soil complete all as specified and directed. |
| 116 | Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in any type of soil complete all as specified and directed. |
| 117 | Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed. |
| 118 | Taking down shutter of any description, not exc. 1 Sqm each complete all as specified and directed. |
| 119 | Taking down shutter of any description, exc. 1 Sqm but n. exe 2 sqm each complete all as specified and directed. |
| 120 | Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and directed. |
| 121 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 122 | S&F in factory made single extruded WPC (Wood Polymer Composite) solid decorative type Glazed door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. |
| 123 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as per specified and directed. |
| 124 | S & F in repair steel section window handles left & Right fixed with nut at existing window complete all as specified and directed |
| 125 | S & F in repair steel section window peg stay 450 mm long fixed with nut at existing window complete all as specified and directed |
| 126 | S&F in repair 0.63 mm thick aluminum sheet fixed on wooden door bottom side and back side, Crumple joints of bldg, colum, beam etc fixed in proper as per instructions of manufacturers complete all as specified and as directed. |
| 127 | M&L for double Charge Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc 0.36 sqm as in floor etc. set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white or coloured cement to match the surface of tile over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of old tiles complete all as specified and directed |
| 128 | S&F in repair stainless steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed. |
| 129 | S&F in repair Wash basin, vitreous China (Flat back) of size 550x400mm including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified. |
| 130 | S&F in repair vitreous China semi pedestal pattern ( Anglo Indian Type ) with wash down (EWC) water closet pan(pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat and cover white for pedestal pattern complete all as specfied and directed. |
| 131 | S&F in repair 15 mm dia CP brass Sink mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. |
| 132 | S & F in repair 15 mm dia CP brass Wall mixer with provision of over head shower complete with 115 mm long bend pipe, connecting legs & wall flange complete all as specified and directed. |
| 133 | S&F in replacement stainless kitchen sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed |
| 134 | S&F in repair stainless steel plate rack of size 900mm x 600mm x 250mm made with not less than 1.00 mm thick ss sheet complete all as specified and as directed . |
| 135 | Cleaning the existing man holes of any size upto 1.5 Mtr depth by removing the sludge/foul by any means & removing the sludge and deposited where directed and flushing the man holes with clear water complete all as specified and directed. |
| 136 | M & L cleaning of inaccesible areaa of roof including perapet walls upto 0.50 metre hight removal of vegetation growth including uprooting if required applying two coat of tartariv acid and repair to broken/ chipped off plastered surfaces with cement mortar 1:4 finished fair and even including necessary ladder/scaffolding complete all as specified and directed. |
| 137 | S & F PVC gully Trap125/110 mm setting and jointing with solvent cement of with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggreate complete all as specified and directed. |
| 138 | Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down old tubing complete all as specified and directed. |
| 139 | Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down old tubing complete all as specified and directed. |
| 140 | Taking down existing old roof treatment as Tar-felt from RCC roof, stone roof etc carefully including cleaning the roof surface by wire/coir brush and remouving all grits, stones, fungus , moss and finally washing down with water to the entire satisfaction of Engr-in-Charge and removing debris and rubbish out of the proedmises to a distance exc 1000m and n.exc 250m and depositing where directed . Roughening the existing concrete surfaces especially where the surface preparation is required, including complete cleaning of surfaces, and providing 15mm thick screed bed or bedding layer in CM (1:3) mixed with integral water proofing compound (WPC) and finishing the surfaces even and fair and proper curing to be done by pouring water through ponding the entire plastered area to the entire satisfaction of Engr-in-Charge complete after Cleaning the entire prepared roof surfaces and applying one coat of cold bituminious primer @ 250 grams/ Sq.m Providing/laying of 3 mm thick polyester APP membranes over the cold bitumionus primer. Application of APP membranes shall be by torch application. The overlaps shall be minimum 100 mm and thermo fused. Provide a uniform coat of blown bitumen 85/25 grade @ 1.20 Kg/Sq,m over the polyester APP membranes.Blown bitumen surfaces shall be coated with aluminium primer @ 110 grams/Sq.m complete all as specified and directed. |
| 141 | M & L for providing 50mm thick (average) PCC (1:2:4) Type B-1 (with using 20mm graded stone aggregate) as in roof padding including finishing even and smooth without using extra cement and proper curing to be done by pouring water through ponding the entire roof padding area to the entire satisfaction of Engr-in-charge complete all as specified and directed. |
| 142 | Excavation in trenches not exc 1.5 metre width and not exceeding 1.5 metre in depth in hard/dense and getting out complete all as specified and as directed. |
| 143 | Cleaning of blocked water closet (of any type / pattern) including connected CI pipe line (of any bore) up to 1st manhole complete all as directed. |
| 144 | Cleaning of blocked nahni / floor trap (of any size /type), sink / urinal / wash- hand basin including connected GI / CI pipe line (of any bore) up to gully trap complete all as directed. |
| 145 | M&L for cleaning of sewer lines (removal of blockage between two manholes) of various sizes for sewage by any means of rodding etc (manually) and flushing with water including removing rugs of any type, dirt, foreign matter etc and removing out side of MOD land complete upto the entire satisfaction of Engineer-in-charge complete all as specified and directed. |
| 146 | Cleaning of manhole chamber of depth not exceeding 1.0 metre each, by taking out accumulated sludge, silt, mud etc and removing the same at a distance not exceeding 50 metre (where directed), washing and well flushing of the manhole chamber with water complete as directed. |
| 147 | Cleaning of manhole chamber of depth exceeding 1.5 metre but not exceeding 2.5 metre each, by pumping out deposited water, taking out accumulated sludge, silt, mud etc and removing the same at a distance not exceeding 50 metre (where directed), washing and well flushing of the manhole chamber with water complete as directed |
| 148 | Cleaning of manhole chamber of depth exceeding 2.5metre but not exceeding 3.5 metre each, by pumping out deposited water, taking out accumulated sludge, silt, mud etc and removing the same at a distance not exceeding 50 metre (where directed), washing and well flushing of the manhole chamber with water complete as directed |
| 149 | Cleaning the garbage bins removing wet and dry garbage etc. by any means and removing outside MOD land complete all as specified and directed |
| 150 | M & L cleaning of outer surface of down take pipes any type treating minor leakages at joints clearing of vegetation scraping of algae growth with wire brush chipping of damaged plaster at the joints (area not exc 0.50 Sqm) and making good with cement mortar 1:4 duly mixed liquid water proofing compound @200 m/ per 50 kg bag of cement and applying one coat of tartaric acid on dry finished plaster surface including necessary ladder / scaffolding complete all as specified and directed. |
| 151 | M & L for cutting around the pipe 75/110 mm bore waste pipe soil pipe including taking out plants roots up to any depth in brick masonery and rejounting in pipe joint in epoxt mortar ( Asain/Berger) and making good to existing surface all as directed by Engr-in charge ( After the jointing pipe one week to open for chacking of leakage including scaffolding) complete all as spcified and directed. |
| 152 | M & L for cutting the existing RCC Pillar up to Pipe hight cover with decorative bricks tiles for waste pipe/ soil pipe/ Rain Water pipe including taking out plants roots up to any depth in brick masonery and Change the existing pipe with proper postion and fixed with clamp and making good the distrubed portion with cement Mortar 1:4 and finsh the existing colours and stop the leakage / sepage including scaffolding complete all as spcified and directed. ( Note: Pipe shall be measured seprately & work carried out at 5th Storey) |
| 153 | Taking up/down plants or vegetation groth wall upto roof level by means of cutting hole into brickwall and making good the surface of dismantled portion (not exc 150 Sqm cm superfical area and not exc one brick depth) using bricks bats / aggragate and plastering in cement mortar (1:4) to distributed portion and applying two coat of cement base paint to match the existing surfaces up to forth floor complete all as specified and directed. |
| 154 | M&L for PCC 1:5:10 type E-2 (using 40 mm graded agg) filling in sunken floor complete and including demolition of existing cement concrete and removing to out of defence land complete all as specified and directed. |
| 155 | M & L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in surface chanel and drains including necessary form work complete all as specified and as directed. |
| 156 | M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring benching to drain, coping, etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed. |
| 157 | M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement ncluding demolition of existing cement concrete and removing to out of defence land complete all as specified and directed complete all as specified |
| 158 | M&L for 40mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with including demolition of existing cement concrete complete all as specified and directed complete all as specified |
| 159 | M&L brick work with old size brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 160 | All as per item No. 159 above but except bricks complete all as specified and directed. (Old bricks obtained from demolition shall be re-used) |
| 161 | M&L for brick work with old size brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed. |
| 162 | M&L for random rubble stone masonary, uncoursed well bounded, bedded and soilidly hearted in cement mortar (1:4) completed all specified and directed. |
| 163 | M & L for raised pointing to random rubble, uncoursed masonry in CM 1:4 without using extra cement complete all as specified and directed. |
| 164 | Taking down cement plaster from RR stone masonry walls, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 165 | M & L for rendering 15 mm thick in CM 1 : 4 on any faces of stone masonry or concrete block surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 166 | M & L for preparation of newly plastered wall surfaces and applying two coasts of cement base paint complete all as specified and directed. |
| 167 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 200 mm set in cement mortar complete all as specified and directed. |
| 168 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 450 mm set in cement mortar complete all as specified and directed. |
| 169 | Supply and laying 200 mm bore reinforced concrete pipe of Class NP-2, with collars, laid and jointed complete all as specified and as directed. |
| 170 | Supply and laying 450 mm bore reinforced concrete pipe of Class NP-2, with collars, laid and jointed in trenches complete all specified and as directed. |
| 171 | Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), finished smooth and reforming benching for any bore pipe as required and as directed. |
| 172 | S&F in repairs vitreous china wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device complete all as specified and directed. |
| 173 | Dismantling of 75/90/100/110/160 mm dia AC /cast iron or PVC pipes,jointed in CM and taking out etc complete all specified and directed. |
| 174 | S & F cast iron soil waste pipe (spun type) 100 mm bore in any length with or without ears with cement glands and fixed to wall with suitable clamps on wall complete all as specified and directed. |
| 175 | S & F cast iron soil waste pipe (spun type) 75 mm bore in any length with or without ears with cement glands and fixed to wall with suitable clamps on wall complete all as specified and directed. |
| 176 | S & F CI (spun pipe)100 mm bore Plain Bend for spun pipe complete all as specified and directed. |
| 177 | S & F CI (spun pipe) 75 mm bore plain bend for spun pipe complete all as specified and directed. |
| 178 | S & F cast iron (spun pipe) 100 mm bore of Bend with oval access doors complete all as specified and directed. |
| 179 | S & F cast iron (spun pipe) 75 mm bore of Bend with oval access doors complete all as specified and directed. |
| 180 | S & F cast iron (spun pipe) 100 mm bore of Tee with oval access doors complete all as specified and directed. |
| 181 | S & F cast iron (spun pipe) 75 mm bore of Tee with oval access doors complete all as specified and directed. |
| 182 | S & F cast iron (spun pipe) cowls for 100 mm bore of pipe complete all as specified and directed. |
| 183 | S & F cast iron (spun pipe) cowls for 75 mm bore of pipe complete all as specified and directed. |
| 184 | S & F spun iron floor trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggreate complete all as specified and directed. |
| 185 | S & F spun iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggreate complete. |
| 186 | S & F in repair Salt-glazed stoneware gully Trap square or Round mouth of size 150x150 mm type 'P' fixed with PCC 1:2:4 type B-0 using 20 mm graded stone aggregate complete all as specified and directed. |
| 187 | S & F in repair PVC gully Trap square or Round mouth of size 150x150 mm type 'P' fixed with PCC 1:2:4 type B-0 using 20 mm graded stone aggregate complete all as specified and directed. |
| 188 | S & F FRP Squre Manhole cover with frame of size 1200x 450 (5 MT) havey Duty , anti corrosive, non rusting with suitable load bering capacity fixed in proper position complete all as directed. |
| 189 | S & F in repair RCPC (Reinforced Cement Polymer Concrete) Man hole cover with frame of size 1200mm x 1200mm (anti skid top) fixed in proper position in existing man hole complete all as directed. |
| 190 | S & F in repair RCPC (Reinforced Cement Polymer Concrete) Man hole cover with frame of size 1500mm x 1200mm (anti skid top) fixed in proper position in existing man hole complete all as directed. |
| 191 | S & F in repair RCPC (Reinforced Cement Polymer Concrete) Man hole cover of size 600mm x 450mm x 75 mm (anti skid top) fixed in proper position complete all as directed. |
| 192 | Providing Factory Made Pre cast RCC drain of size 300mm x300 mm wide channel/saucer drain with RCC cover slabs suitable for storm water drainage complete all as specified and directed |
| 193 | M&L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab and man hole covers etc set in cm 1:6 complete all as specified and directed. |
| 194 | S&F 160 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/ wall etc with PVC clamp and holder bats complete all as specified and directed. |
| 195 | S&F in repairs PVC (SWR) bend of dia 160mm complete all as specified and directed. |
| 196 | M&L 18 to 20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of old stone complete all as specified and directed. |
| 197 | M&L for Pre polished Chequered cement concrete tiles 30cm x 30cm x 22 mm thick , machine pressed set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment and cut and polished laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 198 | S&F machine pressed precast cement concrete interlocking paver block of 60 mm thick M-35 with top layers of colour rubrised ante abrasive material laid over sand cushion including dismantling of existing paver blocks complete all as specified and directed. |
| 199 | Refixing of Serviceable machine pressed precast concrete interlocking paver blocks any shape and size obtained from ser item No.198 above complete all as specified and as directed. |
| 200 | M&L for point wiring with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through and including non metallic medium duty rigid PVC concealed conduit 20mm dia or higher size complete including factory made MS pressed modular metal flush boxes with zinc coated duly concealed in wall of thickness 1.2 mm including polycarbonate frame for housing modular switches, sockets, fan regulators etc including modular white cover plates of suitable size/module as required at site and 1.5 sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes including taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc as existing for the followings: Note : The wiring to be done as per IE rule and as per colour code. |
| 201 | One light point, controlled by one way switch. |
| 202 | One fan point, controlled by one way switch through regulator. |
| 203 | One bell point, controlled by bell push switch. |
| 204 | One three pin 5 Amp socket on same board with other switches. |
| 205 | One three pin 5 Amp socket on independent board. |
| 206 | All as per item No.200 here in before but point wiring with 4 sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 4sqmm PVC insulated multi strand copper conductor cable as continous earth wire. |
| 207 | S&F modular switch single pole one way, one module, 230 Volts 6 Amp complete all as directed. |
| 208 | S&F modular socket 6 Amps, 2/3 pin combined, two module, 230 Volts complete all as directed. |
| 209 | S&F modular switch single pole one way, one module, 230 Volts 16 Amp complete all as directed. |
| 210 | S&F modular socket 16 Amps, 2/3 pin combined, two module, 230 Volts complete all as directed. |
| 211 | S&F bell push modular flush type, single pole one way 6 Amps, one module, 230 volts complete all as directed. |
| 212 | S&F calling bell ding dong type AC 230 Volt single pole complete all as specified and directed. |
| 213 | S & F ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as specified and directed. Please Enable Macros to View BoQ information |
| 214 | S & F ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender