Tender For Electricity Supply Work In Meerut Mandapam Located In Vedvyaspuri Yojana.
Tender Value
30.21 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
4 days left
EMD
60425
Bank guarantee accepted
Document Fee
3450
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electricity Supply Work In Meerut Mandapam Located In Vedvyaspuri Yojana.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Erection of S.T.Pole 11 mtr long. 410- S.P 55 (G.I Bottom)complete in all respect as per direction of the Engineer-Incharge. (PSR-20) |
| 2 | Supply & Fixing M.S. Channel 75x40mm, 2.24mt long complete in all respect as per direction of the Engineer-Incharge. (PSR-27) |
| 3 | Supply & Fixing M.S. Channel 100x50mm, 2.24mt long.complete in all respect as per direction of the Engineer Incharge. (PSR-26) |
| 4 | Making suitable earth of S.T.Pole with 2.5 mt long 20 mm dia G.I rod, 4 S.W.G.G.i wire include the cost of all material, labour, T&P etc complete in all respect. (PSR-29) |
| 5 | Painting of S.T Pole with 2 coats of aluminium paint over red oxide primer complete in all respect SOR 2018/634 |
| 6 | Supply & erection of stay set at least 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm x 600 double screw tightener, 7/4.00 mm G.I stay wire etc. in 1:3:6 cement concrete complete in all respect.(SI No-630/2018) |
| 7 | S/F of 11 KV TPMO set with required channel, handle switch and insulator etc. complete as per UPCCL norms.(PSR Rate) |
| 8 | S/Fof 11 KV lighting arrestor set Complete in all respect as per direction of Engineer-Incharge. (PSR-11) |
| 9 | S/F of 11 K.V.D.O. fuse set on pole complete as per UPCCL norms. (PSR Rate) |
| 10 | S/F of 11 KV disc insultor (70KN) including gun fitting. Complete in all respect as per direction of Engineer-Incharge. (PSR-08) |
| 11 | S/F of 11 KV pin insulator with G.l. pin Complete in all respect as per direction of Engineer-Incharge. (PSR-07) |
| 12 | Supply & Making of transformer Plinth Size 2.50x2.00x1.50mt.complete in all respect as per direction of the Engineer-Incharge. (PSR-28) |
| 13 | supply installation testing and conmissioning of T/F 11/0.4 KV, 250 KVA Lavel-2 Four Star Rating. (PSR-33) |
| 14 | S/F of HT/LT jumpering & connection of double pole & T/F as per direction of E/I. (PSR Rate) |
| 15 | Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked.complete in all respect as per direction of the Engineer-Incharge. SOR-2018/1142 |
| 16 | Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. SOR-2018/804, Incoming, 400 Amp. TPN-1 No, Outgoing, (b) 315 Amp.TPN-1 No, 100 Amp.TPN-1 No and 63 Amp.TPN-1 No (ii) Cat. B. Cubicle Type |
| 17 | Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. SOR-2018/801, Incoming, 100 Amp. TPN-1 No, Outgoing, (b) 32 Amp. TPN-3 Nos. (ii) Cat. B. Cubicle Type |
| 18 | Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. (f) 120 sq. mm 3 core SI No-506a/2018 |
| 19 | Supply & Fixing of 11 KV Cable Indoor heat shrinkable Jointing Kit (3 x 120 sq mm):- Indoor complete in all respect as per direction of the Engineer-Incharge. (PSR-28) |
| 20 | Supply & Fixing of 11 KV Cable Outdoor heat shrinkable Jointing Kit (3 x 120 sq mm):- Outdoor Complete in all respect as per direction of Engineer-Incharge. (PSR-39) |
| 21 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SOR-2018/501 (r) 240 sq. mm 3-1/2 core |
| 22 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SOR-2018/501 (t) 400 sq. mm 3-1/2 core |
| 23 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SOR-2018/504 (m) 240 sq. mm |
| 24 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SOR-2018/504 (o) 400 sq. mm |
| 25 | Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. complete in all respect as per direction of the Engineer-Incharge. SOR-2018/725(D) |
| 26 | 701 Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. |
| 27 | S/L of following size dia. B class G.l. pipe complete in all respect as per direction of the Engineer-Incharge. iii-100 mm (PSR-17) |
| 28 | S/F of HDPE (Dwc pipe for road crossing etc. (PSR-15) (t) 120/103.05nim (O.D/I.D) |
| 29 | Supply & erection of overhead line with ACSR conductor on poles / service bracket including binding etc. complete in all respects. SI No-627 SOR/2018 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender