Tender For Repair/Maint Of Ci/Gi/Ms Pipe Line, Sluice Valves Connected Wks At Afs Amla
Tender Value
30 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
17 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Betul → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Ci/Gi/Ms Pipe Line, Sluice Valves Connected Wks At Afs Amla
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation etc or for laying pipe lines and getting out as in hard/dense soil complete all as specified and directed. |
| 2 | Returning filling in including spreading leveling, watering and well ramming in layer not exceeding 25 cm in hard/dense soil, complete all as specified and directed. |
| 3 | Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 4 | Supply only pig lead ingot of 200 gm each piece complete all as specified and as directed. |
| 5 | S & F in replacement, mild steel clamp suitable for 100mm bore pipe made from 25x3mm flat iron including 20mm socket welded in the clamp complete all as specified and as directed. |
| 6 | S & F in replacement, mild steel clamp suitable for 150mm bore pipe made from 25x3mm flat iron including 20mm socket welded in the clamp complete all as specified and as directed. |
| 7 | Repair to leaking joint of 100mm bore CI/DI pipe line in trenches, opening the leaking joint by opening CI/DI fitting, fixing CI/DI fittings, providing lead/ rubber tighten joint, testing of repaired joint, returning, filling in to make good the disturbed surface to match with the existing one complete all as specified and as directed. Note: (a) Earth work, DI pipe, CI/DI fittings, lead wool and rubber tighten joint as required shall be measured and paid separately under respective item of BOQ. (b) Pig lead retrieved during opening of old joints shall be used for lead joints, however, additional lead, if required, shall also be measured and paid separately under respective item of BOQ as supply only. |
| 8 | All as per item Srl No. 7 above but for 150mm bore pipe complete all as specified and directed. |
| 9 | All as per item Srl No. 7 above but for 200mm bore pipe complete all as specified and directed. |
| 10 | Taking up CI/GI pipes 100/80 mm bore removing from site (including all fittings) with spigot & socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed. |
| 11 | All as per item Sr No: 10 above but 150 mm bore complete all as specified and directed. |
| 12 | All as per item Sr No: 10 above but 200 mm bore complete all as specified and directed. |
| 13 | Supply, laying, jointing and testing of ductile iron pressure pipe with socket & spigot ends having ISI stamping marking confirming to IS:8329/2000 in standard length of 5.50 - 6.00 meter of classification K-7 suitable for and including push on rubber tyton (gasket D-jointing) with cement mortar lining in the pipes having 100 mm bore, including aligning the pipes inside trench as per IS:12288/1987 and testing the joints with required water pressure complete all as specified & directed. Note: (i) Cutting of pipe shall be measured and paid for separately (ii) Excavation earth works shall be measured and paid for separately. (iii) CI/DI specials shall be measured and paid for separately. |
| 14 | All as per item Sr No: 13 above but 150 mm bore complete all as specified and directed. |
| 15 | All as per item Sr No: 13 above but 200 mm bore complete all as specified and directed. |
| 16 | S & F DI/CI pipe fittings such as bends, tapers, tee pieces single branch, \\"Y\\" junction, collars, caps and plugs etc spigot socketed or flanged ends type of size upto 150 mm nominal bore including push on rubber tyton joint conforming to IS-9520/2000 with pressure rating PN-1 (all the fittings shall be coated for rust prevention i.e. external coating zinc rich paint with finishing layer of bituminous as per Annexure - A of IS:9523/2000 and internal lining shall be of cement mortar with seal coat as per Annexure 'B' of IS-9523/2000) complete all as specified and directed. |
| 17 | All as per item Sr No: 16 above but of size 200 mm to 300mm complete all as specified and directed. |
| 18 | Cutting to existing CI/DI pipe line of size 80/100mm dia required for repair/replacement of pipe line and insertion of collars/tail pieces, tee etc including dewatering of pit if any complete all as specified and directed. Note: Excavation and earth work if, any shall be measured and paid for separately. |
| 19 | All as per item Sr No: 18 above but 150 mm bore complete all as specified and directed. |
| 20 | All as per item Sr No: 18 above but 200 mm bore complete all as specified and directed. |
| 21 | Taking down existing old and unserviceable sluice valve removing from site and depositing to MES store. S & F cast iron non rising sluice valve, brass spindle 100 mm bore, flanged ends PN-1.6 ISI marked as per IS:14846/2000 and CI operating wheel including gasket, nuts, bolts and washers complete all as specified & directed. |
| 22 | All as per item Sr No: 21 above but 150 mm bore complete all as specified and directed. |
| 23 | All as per item Sr No: 21 above but 200 mm bore complete all as specified and directed. |
| 24 | Taking down existing old and unserviceable non return valve removing from site and depositing to MES store. S & F cast iron non return valve, brass spindle 100 mm bore, flanged ends PN-1.6 ISI marked as per IS:5312 2004 including gasket, nuts, bolts and washers complete all as specified & directed. |
| 25 | All as per item Sr No: 24 above but 150 mm bore complete all as specified and directed. |
| 26 | Supply and fixing in replacement 20 mm bore galvanised steel tubing medium grade, ISI marked including necessary fittings complete all as specified and as directed. |
| 27 | All as per item srl No. 26 above but GI pipe 25 mm bore complete all as specified and directed. |
| 28 | All as per item srl No. 26 above but GI pipe 40 mm bore complete all as specified and directed. |
| 29 | All as per item srl No. 26 above but GI pipe 50 mm bore complete all as specified and directed. |
| 30 | Supply and fixing in replacement gun metal gate valve with iron wheel head screwed both end suitable for 20 mm bore pipe, ISI marked, complete all as specified and as directed. |
| 31 | All as per item srl No. 30 above but for 25 mm bore GI pipe complete all as specified and directed. |
| 32 | All as per item srl No. 30 above but for 40 mm bore GI pipe complete all as specified and directed. |
| 33 | All as per item srl No. 30 above but for 50 mm bore GI pipe complete all as specified and directed. |
| 34 | M&L for construction of valve chamber of internal size 900 x 900 x 900mm suitable including necessary earth work excavation PCC 1:4:8 in foundation type D2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle frame 40 x 40 x 5mm all round and at diagonals of size 25 x 6mm and MS plate welded to MS angle as shown in drawing, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc, all as specified and as directed. |
| 35 | M & L for brick work with sub class 'B' bricks straight or curved on plan of any radius built in CM 1:6 complete all as specified and directed. |
| 36 | M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass- concrete, complete all as specified & directed. |
| 37 | M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping and the like including necessary form work etc, complete all as specified & directed. |
| 38 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender