Tender For Construction Of Skill Development Centre At Moti Bagh, New Delhi.
Tender Value
36.36 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
0 days left
EMD
72723
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Skill Development Centre At Moti Bagh, New Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing of 2 hour fire rated Steel Fire Door Frame 100x57mm single rebated as per site and location complete with directions of Engineer-in-charge/ Fire Officer.a) The door frame shall be 2 hours 3 criteria rating (Stability, Integrity and thermal Insulation) fire door- fabricated and complying with requirements of CBRI Roorkee/Government Department and conforming to relevant BS: 476 Part 20 & 22 & IS: 3614 Part II.b) The frame shall be fabricated from 1.6 mm thick galvanized steel sheet conforming to IS:277 with a factory pre-punhced groove so as to accomodate Fire & smoke seal size 10 x 4mm Frames should be butt jointed and field assembeled with bolting sytem for proper strength. Frames shall be provided with holdfasts, fasteners etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge.Note: The frame shoule be finished with Powder coating in desired shade. |
| 2 | Providing and Fixing 46 mm thick Steel fire check door shutter of 120 minutes fire rating for stability & Integrity & 20 minutes of insulation confirming to BS:476 Part 22 and IS: 3614 Part II fabricated with 2 nos. 1.2 mm thick galvanized sheet with infill of fire rated Mineral Wool insulation filler of 64 Kg./M3 bonded to both faces of sheet with lock seam joints at stile edges and internal reinforcement at top, bottam and stile edges for fire rating. The door frames are manufactured from 1.6mm thick galvanized steel sheet pressed form to single Rebate profile of size 100mm 57mm. The door frames and door shutters are finished with \\"H\\" primer plus powder coating etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge.Note: The shutter shoule be finished with Powder coating in desired shade. |
| 3 | Supply and fixing of 6mm thick, 2 Hrs. Fire Rated clear glass which can also withstand thermal shock upto 800 degree centigrade shall be used as in vision panel and is to be fixed in between the glass beading by using ceramic fiber and fire rated acrylic sealant in accordance with BS : 476 Part 22, EN 1363/EN 1364 for stability and integrity etc complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge.(Make - SCHOTT / Saint-Gobain / equivalent) |
| 4 | Providing & Fixing glazing in Fire Resistant Door Shutter, fixed panels and partitions etc with GI beading made out of 1.6mm thich GI sheet (Zinc coating not less than 120gm/sqm) of size not less than 20 x 33 mm screwed with M4 x 38 mm screws at distance 75mm from the edges and 150mm c/c, including applying a coat of fire resistant primer / powder coating of not less than 30 micron of GI beading & special ceramic tape of 5 x 20mm size etc complete in all respect as per Engineer in Charge. The glass shall be clear, toughened, non wired, Interlayer fire resistant of having 11mm thickness of SAINTGOBAIN/ PYROBECK /EQ approved brand with 120 minutes of fire resistance both Integrity & radiation control (EW=120) and minimum 20min insulation (EI=20)with symmetrical (Bi-Directional) fire protection . The glass shall be able to withstand fire attack from both side. The Glass only is having a sound reduction of 37dB and LT of 86%. Glass shall be compliant to class 2B2 category of impact resistance as per EN 12600. The glass should be manufactured in UL & TUV audited facility and including UL-EU certification. The maximum glazing size cant be more than 1100mm x 2200mm (w x h) or 2.42 sqm in total area. The test report for the complete system (Glazed Door/Partition) will be considered valid only if it contains the stamp and signature of the authorised signatory from the glass manufacturer (Actual supplied glass size at site to be measured for payment)(Glass = 11 mm thick) |
| 5 | Providing and fixing of 2 hour fire rated Door Closers UL tested for fire doors, fire tested in accordance of EN 1634-3 and for mechanical test to EN 1154 for 50000 cycles and shall be tested with fire door for 2 Hours fire rating door weight upto 36 kg, to 80 Kg and door width from 701mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. |
| 6 | Supplying and Fixing of Stainless Steel Tower Bolt of 300 x 10 mm 2 hrs Fire rated on existing double leaf door shutters openable inside or outside etc. complete U.L. listed, CBRI tested complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. |
| 7 | Providing and fixing stainless steel 304 Grade D - Type pull handle 2 hrs fire rated of size 300 mm long and 22 mm Dia including stainless, Caps, nuts and bolts etc. of required size complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. |
| 8 | Providing and Fixing of 2hrs fire rated Mortice dead Lock of superior quality complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. |
| 9 | Supply & application of 2 hour fire rated Fire Sealant in Joints between frame & wall and Filling upto 25mm in width as per manufacturer’s specification with backup rod, paper taping on both the faces to avoid spoiling of adjacent walls, as required and as per direction of Engineer-In-Charge.(Note : Above 25 mm in width, the measurement will consider 25 mm in width) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender