Tender For Providing 200Mm Deep Borewell At Girija Mariyamman Kovil In Thirukattupalli Town Panchayat.
Tender Value
5 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
3 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing 200Mm Deep Borewell At Girija Mariyamman Kovil In Thirukattupalli Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm/200mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers) including construction of mud pit. |
| 2 | Upto 60 mt. Depth ending below ground level |
| 3 | Reaming 140/150/200mm dia pilot bore to 300mm dia bore as directed by the TWAD Board Officer. |
| 4 | Upto 60 mt. Depth ending below ground level |
| 5 | Supply of the following casing pipes of ISI approved quality with wall thickness not less than 7.5mm to 8.5mm with PVC couplers and cement Paste etc. Complete and including packing the annular space with pebbles quality and size of pebbles and the PVC pipe should be approved by the departmental officer.TWAD P-17 |
| 6 | Plain Pipe CM |
| 7 | Ribbed screen pipe |
| 8 | 200mm dia OD PVC end cap |
| 9 | Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the executive engineers of TWAD Board |
| 10 | Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by TWAD Officers and conducting yield test by 'V' notch method. |
| 11 | Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 with latest amendments and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainlesss steeel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/difuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor asper IS9283 suitable for operation in AC 3 phase 415 V+/- 10 %, 50 HZ +/- 5 % {7.5HP (600 x 240)} TWAD P-121 |
| 12 | Supply and delivery of Star-Delta 7.5 hp starter confirming to IS 13947 and IEC 947 suitable KW rating for operation in AC/ three Phase/50HZ(+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter(65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next tandard higher KW rating, Single phasing reventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable powder coated vermin proof box, including the capacitor(the cost of capacitor is to be taken separately). |
| 13 | PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE 6.0SQ.MM COPPER CABLE CONFORMING TO IS 694/1990 FOR THE YEAR |
| 14 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 15 | Supply and fixing of 63A TPNMC switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing |
| 16 | Supply and fixing of 80mm UPVC Column pipe including cost and conveyance of all materials and labour charges etc complete as per standard specification. |
| 17 | Supply and run of 4x6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7/20 GI bearer wire for service connection mains SD 68 |
| 18 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., |
| 19 | Supplying and fixing of GI and pvc specials as follows |
| 20 | 80 mm GI coupling |
| 21 | 80 mm GI elbow |
| 22 | 80 mm GI union |
| 23 | 80 mm GI Hex nipple |
| 24 | 80 mm GM Non Return valve |
| 25 | 80 mm GM Gate valve |
| 26 | 80 mm TEE |
| 27 | 80 mm Dummy |
| 28 | 80mm ClamP Set |
| 29 | 80mm GI Flange set Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender