Tender For Provn Of Ring Main System Alongwith Ht Ug Cable And special Repair For Conversion Of Oh Ht Line To Ug Ht Cable Alongwith Connected Items Under Ge Gwalior
Tender Value
91 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
11 days left
EMD
1.62 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Ring Main System Alongwith Ht Ug Cable And special Repair For Conversion Of Oh Ht Line To Ug Ht Cable Alongwith Connected Items Under Ge Gwalior
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: HQ CWE Jhansi Name of Work: PROVN OF RING MAIN SYSTEM ALONGWITH HT UG CABLE AND SPL REPAIR FOR CONVERSION OF OH HT LINE TO UG HT CABLE ALONGWITH CONNECTED ITEMS UNDER GE GWALIOR Contract No: CA NO CWE/JHA/GWL/TOKEN/60 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Supply and erection of Steel tublar swaged poles, complete with cast iron base plate, finials taper plug , bolts, nuts & screws as specified type 410 SP-55 (11.00 mtr long) including painting of poles with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces. Note : Earth work and PCC shall be measured & paid separately under respective items. |
| 3 | Supply, laying & testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 11000 Volts grade with stranded aluminium conductor of sizes 120 sqmm 3 core complete all as specified and directed. |
| 4 | Supply and fix cable jointing kit for 11 KV grade cable for indoor termination, heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 120 sqmm |
| 5 | Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination, heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 120 sqmm |
| 6 | Supply and fix cable jointing kit for 11 KV grade cable for straight through heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 120 sqmm |
| 7 | Supply laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) with stranded aluminum conductor, 11000 volts grade, of size 3 core 95 sq mm. |
| 8 | Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination, heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, aluminium conductor cable of size 95 sqmm |
| 9 | Supply and fix cable jointing kit for 11 KV grade cable for indoor termination, heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, aluminium conductor cable of size 95 sqmm |
| 10 | Supply and fix cable jointing kit for 11 KV grade cable for straight through heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, aluminium conductor cable of size 50 sqmm to 95 sqmm |
| 11 | Supply, install, testing and commissioning of 11kV 630 Amp SF6 insulated 4 way Ring Main Unit (02 Nos SF6 Circuit breakers Incoming & 02 Nos VCB Outgoing) of Outdoor type (IP 54), Motorized operated, One side extensible with PT panel / Metering enclosure, consisting of copper busbar in SF6 insulated 304 (Non-Ferrite Non-Magnetic Grade) stainless steel enclosure of thickness 2.5mm with manometer fixed on the tank. The Breaker shall have mechanical ON /OFF indicator with hand trip device and spring charging, spring release coil, auxiliary switch of 2 NO +2NC. The HV switchgear and control gear should be confirming to IEC-62271-100, 200. The RMU gas tank should be internal arc tested for 21KA for 1Second with IAC-AFLR classification for gas tank and Cable chamber. The complete RMU mimic and cable chamber shpuld be covered by a single door to have ingress protection of minimum IP54. The RMU design should support site replaceable HT cable bushing and VI of VCB should be RMU Manufacturer’s own make. All the type test certificated as per IEC from Third party lab to be submitted. |
| 12 | RMU Should have followings:- Rated voltage 12 kV, Rated power frequency withstand voltage 28 kV for 1 min, Rated lighting withstand voltage 75 kVp, Rated peak current 52.5 kA, Rated short time current 21 kA for 3 sec, filling pressure 0.4 Bar.- 1 No microprocessor based Self powered numerical relay with over Current/ earth fault & short circuit protection with each VCB feeder. - 3 Nos Protection CT shall be of Burden 2.5VA, ratio 100/1A, Class of Accuracy class 5P10 for O/C and E/F protection for each VCB.- 3 Nos Metering CT shall be of Burden 2.5VA, ratio 100/1A, Class of Accuracy class 0.5(CT ration is indicative and may vary during detailed engineering )- 1 No Manometer for each tank- 1 Nos Voltage passage indicator for each feeder.- 11KV/V3/110V/V3 PT for metering purpose with 20 VA & Accuracy class 0.5. - Right angle boots for all the feeder Modules - Multifunction meter having A, V, PF, active power etc for each VCB feeder. - VCB module should confirm to O-0.3Sec-CO-3min-CO operating sequence. - VCB modules should confirm to 10000 mechanical operation without any Maintenence. - Basic insulation level of complete system shall be 28KV(RMS)/75KV(Peak) 1 set 1000VA, 11KV/230V , Auxiliary PT for Battery & Charger 1 Set 12VX2-24V Battary & Charger for motorized operation.NOTE :- RMU shall be placed on PCC platform of size and design recommended by manufacturer and the cost of the same shall be deemed to be included in unit quoted rates. |
| 13 | M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground, earth pit not less than 2.25m deep below normal GL with top edge of the earth plate not less than 1.25m below GL connected with earth strip 32 x 6 by means of check nuts, bolts, nuts, washers of GI or steel all as shown in plate no. 3 of MES sch. Pt 0I, connected to main switch board all as specified and testing on completion including provision of earth strip protected by galvanized iron 40 mm dia light grade including all excavation, earth work, PCC, RCC cover, watering by funnel etc. complete including testing on completion, complete all as specified as directed |
| 14 | M and L boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique & necessary machine and including HDPE pipe of 150 mm dia suitable for 0.4 Mpa working pressure complete all as specified and directed. |
| 15 | M and L providing cable route indicator of size 100mm dia embossed as HT round shaped 10mm thick with marking of 11 KV, HT welded bolted on angle iron of 25x25 of 60cm length grouted in PCC (1:3:6) type C-2 using block size of 150x150x150mm embedded in ground including not exceeding earth work complete all as specified and as directed. |
| 16 | M & L for GI Pipe light grade complete with fittings laid in floor/ trenches/ wall as cable protection of 100 mm dia complete all as specified and as directed. |
| 17 | Excavation in tenches not exceeding 1.5m wide and not exc 1.5m depth and getting out in any type of soil complete all as specified and as directed. |
| 18 | Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25 cm in soft/loose soil complete all as specified and as directed. |
| 19 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed. |
| 20 | M&L for sand cushioning in trenches for cable protection including consolidation complete all as specified and as directed.Note : Contractor provided sand consider 15 cm below cable and 8cm above cable and panned down gently and measured for payment 18 cm. |
| 21 | Supplying and laying un-reinforced pre cast concrete cable cover of class HV type1 flat size 300 mm x 180 mm x 40 mm fixed in replacement of any type bricks or PCC covers complete all as speicified and as directed. |
| 22 | M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 23 | M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 24 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded & stone aggregate as in bed block for hold fast or coping including necessary form work complete all as specified and as directed. |
| 25 | M & L for cross arms, bracing, supports, clamps and back plated fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as directed inclusive of 2 coats of aluminium paint over one coat of red oxide primer after complete all as specified and as directed. |
| 26 | S&F pin type, pocelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000 volts grade complete all as specified and directed. |
| 27 | S & F vertical type air break switch, gang operated, tripple pole mechanically operatd, outdoor type, with fittings and aaccessories, mounted on and including HT 11 KV porcelain insulators 12 Nos and steel channel frame, GI operating rod 25 mm dia of suitable length to worked from ground including locking arrangements suitable for 200 Amps current rating etc complete all as specified and as directed. |
| 28 | M&L for lightning arresters non linear resistor type complete with all fittings, transmission class, discharge capacity 10 kilo amp, suitable for 11000 volts complete all as specified and as directed |
| 29 | Dismantling & taking down ACSR conductor of any size after taking necessary shut down for 11KV OH line by loosening the binding wires jumpers ect complete all as specified and as directed. |
| 30 | Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside complete all as specified and as directed. |
| 31 | Dismantling GI wire of size 4 sqmm etc. complete and setting aside complete all as specified and as directed. |
| 32 | Dismantling insulators any type, any size setting aside complete all as specified ans as directed. Total in Figures 23 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender