Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #56866321

Tender For Provision Of Various Special Repair And Revenue Works At Tawang Mil Stn Under Ge 859 Ews

Issued by Statutory Bodies & Commissions/Committees · Tawang, Arunachal Pradesh
Tender Value
47.41 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
19 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Tawang → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Provision Of Various Special Repair And Revenue Works At Tawang Mil Stn Under Ge 859 Ews- 1 Demolition Of Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For 2 Demolition Of Concrete In Ground Floors And Pavings N Exc 15 Cm Thickness (Below Or Above Ground Level) 3 Dismantling Boarding, Any Description, Fixed In Any Position Fixed With Screws 4 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified And Directed. 5 Dismantling Of Framed Timber Scantlings 40 Sq. Cm And Over In Section, In Any Position 6 Dismantling Plain Or Corrugated Steel Sheeting Any Thickness, Complete All As Specified And Directed. 7 Dismantling Stone Slabs And Tiles Laid Bedded And Pointed In Any Mortar Of Anydescription Or Thickness Infloors, Aprons Etc. 8 Dismantling Timber Scantling With Framed Work In Fillets, Rails, Posts, Rafters, Purlins, Etc. Under 40 Sq Cm In Section , In Any Position All As Specified And Directed. 9 Dismantling Wall And Ceiling Boards Of Any Description Including Cover Fillets Complete All As Specified And Directed. 10 Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For 11 M&L For 18Mm Prelaminated Both Sides With Decorative Choice Laminations Fixed With Screws To Timber Frame Work 12 M&L For Pre-Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Setting In Cm 1:6 Type C1 1:3:6, Complete All As Specified And Directed. 13 M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Complete All As Specified And Directed. 14 M&L For Rcc Type B1 1:24 On Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like 15 M&L Machine Cut Kota Stone Slab Flooring 20-25Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete 16 S & F 20Mm 3-Layer Pp-R P O L Y P R O P Y L E N E Random Copolymer Concealed Pipes Sdr 7.4 Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Watersupply Including All Pp-R Plain & Brass Threaded P O L Y P R O P Y L E N E Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. 17 S&F 4Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed. 18 Compound Girders And Stanchions, Lattice Girders, Aerial Masts, Staging For Water Tanks And The Like Including Caps, Bases, Splices Etc. Built Up From Two Or More Beam Or Channel Sections Or Angles With Plates, Including All Lattice Bars, Stiffeners, Gusset Plates, Etc.(Fe-290 (Gde E -165). 19 Demolition Of Brickwork Or Stone/Boulder Masonry, Laid Dry Built In Cement Mortar Or Cement Lime Mortar 20 Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cu. M, Getting Out In Hard/Dense Soil, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25 Cm, 21 Excavation In Trenches N.Exc 1.5 M Wide And N.Exc 1.5 M Deep For Foundation Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Hard/Dense Soil. 22 Hacking Out Old Broken Glass (Any Hickness, Size, Quality )From Metal Frame Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones 23 M & L Chequered Cement Concrete Tiles 20Cm X 20Cm X 25Mm/30Cm X 30Cm X 25Cm Thick, Set, Jointed And Pointed In Neat Cement Slurry In Floors With Grey Pigment Cement & Pigment Incl Screed Bed Or Bedding Layer Of Cm(1:6) 15 Mm Thick For Laying Floor Finishes 24 M & L For 350 X 250 X 7 Mm/450 X 300 X 6-7 Mm Thick Glazed Coloured Ceramic Tiles On Vertical Surface Of Wall Set And Jointed In Neat Cement Slurry And Pointed In White/Coloured Cement To Match The Shade. (Make; Kajaria/ Orient/ Bell/ Johnson/ Somany). 25 M & L For Pcc 1:4:8 Type D-2 (Using 40Mm Graded Aggr) As In Foundations, Filling And Mass Concrete. 26 M & L For Preparation Of New Steel Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Zinc Chrome Primer Complete All As Specified. 27 M & L For Preparation Of New Wooden Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified. 28 M & L For Providing, Cement Concrete In In Lintels Upto 1.5M Clear Span, Cills, Steps; Seismic And Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets And Railings Upto 60 Cm In Height, Copings, Kneelers, Apex Stones, Bed Plates, Kerbs Not Provided For In Item 04028, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating, As Directed 29 M & L For Rendering 10 Mm Thick In Cm (1:4) On Fair Faces Of Brick Work Or Concrete Surfaces Finshed Rough To Receive Tiles . 30 M & L For Second Class Hardwood Plain Fillets Cross Sectional Area N Exc 3 Sq Cm . Square, Rectangular Or Triangular In Section, Clean Sawn, Secured With Nails Or Brads 31 M & L For Soakage Wells Excavation, In Any Type Of Soil, Foundation In Pcc 1:3:6, Walls Of Honey Compbed Masonry With Top Ring Of M25 Concrete Including Intercepting Chamber And Screen Chamber Made Of Brick Masonry In Cm, Rcc Cover Slab In M25/Sfrc Cover, Inter Connecting Pipes Of Rcc/Dwc Complete Filled With Brick Bats Of Size.(1.20 Mtr X 3.00 Mtr) 32 M & L Mild Steel Bars 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips. 33 M & L Virified Ceramic Tiles (Light Shade) 8 Mm To 9 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Incl Screed Bed With Cm (1:6) 15 Mm Thick For Laying Floor Tiles Complete All As Specified And Directed. 34 M&L 32Mm Waste Coupling Of Ptmt(Half Or Full Threaded) .(Minimum Weight 32Mm 45Gms/40Mm-60 Gms) 35 M&L Fancy Type Pillar Taps, Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed 36 M&L For Rendering 15 Mm Thick Cm (1:6) On Fair Faces In Two Layers Of Concrete Surfaces Of Wall , Finshing The Surface Even And Smooth Without Using Extra Cement Complete. 37 M&L For 100 Mm Thick Pcc 1:3:6 Type C2 (Using 40 Mm Graded Stone Aggregate) As Cement Concrete In Sub-Base Floor And Pavings Etc Complete All As Specified. 38 M&L For 25 Mm Thick Pcc 1:2:4 Type B-0 (Using 12.5 Mm Graded Stone Aggregate) As In Floor Finishes. 39 M&L For 2Nd Class Hard Wood 30Mm Thick Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc. (Without Sash Bars), Edges Of Framing Plain, Chamfered Or Rounded. Fitted With Cut And Mitred Beads For Securing Glass, Etc.; Sizes Of Me-Mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A); Supplied And Fitted To Chowkats Complete All As Specified And Directed. 40 M&L For 3Mm Thick Cover Fillet Of Standard Hard Board, 40Mm Wide And Fixing With Screws Complete All As Specified And Directed By Engr-In-Charge. 41 M&L For 4Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Screws To Timber Frame Work In Ceiling, Complete All As Specified And Directed By Engr-In-Charge. 42 M&L For 6Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work (05 No Of Ply), Complete All As Specified And Directed By Engr-In-Charge. 43 M&L For 75 Mm Thick Plain Cement Concrete Type C-2, 1:3:6, (40Mm Graded Stone Aggregate)As In Plinth Protection, Finishing The Top Surfaces Even And Smooth W/O Using Extra Cement. 44 M&L For Broken Stone Or Boulders Hard Core Of Gauge N.Exc 63Mm, Deposited, Spread And Levelled In Layers Nexc 15 Cm Thick, Watered And Rammed To A True Surface. 45 M&L For Hallow/Solid Pvc Wall Panel Plain In Colour Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc/Metal Frame Including 5Mm Fillet For Wall Panelling Omplete All As Specified And Directed By Engr-In-Charge. 46 M&L For Preparation Of Newly Plastered Surfaces Of Walls And Applying Two Coats Of Oil Bound Destemper, Over A Coat Of Primer Complete All As Specified And Directed. 47 M&L For Prepration Of Old Wooden Surfaces Of Any Description ,Over 10Cm In Width Or Girth And Applying Two Coats Of Finishing Coat With Synthetic Varnish Complete All As Specified And Directed. 48 M&L For Providing Precast Cement Concrete Type B1 1:2:4 (20Mm Graded Stone Aggregate) Solid Building Blocks Or Slabs 10Cm Thick (With Plain Or Interlocking Joints As Directed)Setting In Mortar 1:6 ,Complete, In Walls 49 M&L For Rendering 15Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 Complete All As Specified And Directed. 50 M&L For Screed Bed Or Bedding Layer Of Mortar 15Mm Thick For Laying Floor Finishes In Cm 1:6, Complete All As Specified And Directed. 51 M&L For Second Class Hard Wood In Scantling, Clean Sawn, Timber Framed And Fixed, Complete All As Specified And Directed By Engr-In-Charge. 52 M&L Non - Skid Ceramic Tiles 7 To 8 Mm Thick (Square/Rectangular) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match 53 M&L Tmt Bars Mild Steel Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips → 54 Material & Labour For Applying Two Or More Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Over New Surfaces. 55 Plates (Plain Or Chequered) Channels, Square Cut Or Notched (Ordinary And Counter Sunk) Forming Holes, With Riveted, Bolted Or Welded Attachment (Fe-290 (Gde E -165). 56 Removing Excavated Soils N.Exc 50M And Depositing Where Directed At A Level N Exc 1.5M Above The Starting Point. 57 Returning, Filling In Including Spreading, Levelling, Watering And Well Remming In Layers N Exc 25 Cm In Hard/Dense Soil. 58 S & F 100Mm Butt Hinges, Extruded Aluminium Alloy With Galvanised Mild Steel Hinge Pin, Anodised And Fixed, Type B-21 59 S & F 100Mm Cast Iron Nahani Trap, With Grating Including Jointing To Waste Pipe Fixed In Cement Concrete Type B-1 (1:2:4) Complete. 60 S & F 15Mm Pillar Taps, Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed. 61 S & F 20 Mm Pp-R Gate Valves (Brass Insert) As Per Requirement Of The Site. 62 S & F 3.0Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.50 Sqm In Each Pane. 63 S & F 4.0Mm Thick Figured Glass, Pin Head Type And Glazing With Oil Putty In Squares Nexc 0.5 Sq. M In Each Pane. 64 S & F Ball Brass Valves, High Pressure, With Polythene Float And Flynut Complete, Screwed For Iron Pipe Or Brass Ferrule And Fixed (Bore Dia Of Pipe In 25Mm) 65 S & F Cover Fillets Of Tempered Hard Board 6 Mm Thick, 40Mm Wide And Fixing With Screws 66 S & F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails. Ms Frame Shall Be Covered With Heat Moulded Plain Colour Pvc C Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail, Panelling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Frame Welded/Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading And Joined Together With Solvent Cement Supplying & Fixing In The Frame At Site As Per Specification & Drawing. 67 S & F For Waste Pipe 32Mm Dia,Complete With 80Cm Long Flexible For Whb Fixed Complete All As Specified And Directed . 68 S & F On Site Lldpe Septic Tank Designed To Carry Sewage And Sullage Water, Excavation In Any Type Of Soil, Pcc 1:4:8: Below Foundation, Vent Shaft, Connection Etc, Complete For 20 Users. 69 S & F Pvc (Swr) Couplers, 110Mm Dia 70 S & F Pvc Valveless, Syphonic Action Type, Flushing Cistern 10 Litres Capacity, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Brackets. 71 S & F Soap Dish, Ss , Approximate Size 160X 160X90Mm 72 S & F Steel Ventilators With Centre Hung Shutter Including Two Pairs Of Brass Cup Pivots, Catch Spring And Pulley Wheel, Complete. 73 S & F Two Way Cp Bib Cock With 2 Handles And Wall Flange For Water Closet. 74 S & F Vitreous China Squatting Pan, ‘Orissa Pattern, Size 580 X 440 Mm White, With Integral Foot Rests (Excluding Flushing Cistern And Flush Pipe) Complete. 75 S & F Vitreous Cliina Wash Basin, Wlhite, Flat Back, Size 550X400 Irun Excluding Taps, Waste, Chain And Plug And Porcelain Stopper But Including Cutting For And Pinning In Ends Of Brackets Or Erecting Stand 76 S & F Waste Coupling Of Ss (Half Or Full Threaded) 77 S &F 15Mm Angle Stop Valve Of Ptmt Any Colour High Pressure Screwed For Iron Pipe And Fixed, (Minimum Weight 15Mm-90Gms). 78 S&F In Repairs Vitreous China Wash Basin, White, Flat Back, Size 550X400Mm Excluding Taps, Waste, Chain And Plugs But Including Brackets Complete All As Specified And Directed. 79 S&F Fancy Type Stop Valves, Cast Copper Alloy,Screwed Down,High Pressure,With Crutch Or Butterfly Handle,Screwed Both Ends For Iron Pipe Or For Unions And Fixed 80 S&F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified 81 S&F 100 Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. 82 S&F 100Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. 83 S&F 100Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. 84 S & F 125Mm Size Extruded Aluminium Handles, Cast Type Anodised. 85 S&F 110Mm Bore Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches Or In Floors 86 S&F 150Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. 87 S&F 200Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. 88 S&F 250Mm Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed, Complete All As Specified And Directed By Engr-In-Charge. 89 S&F 2Nd Class Hardwood Plain, Solid, Straight Chowkats And Frames, Wrought Framed Rebated On The Solid, Rounded Or Chamfered Put Together With Glue Pinned At Joints, Complete All As Specified And Directed By Engr-In-Charge. 90 S&F 30Mm Thick 2Nd Class Hardwood, Glazed And Skelton Shutters, Open Rebated And Prepared To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shuters As Specified In Ssr Part-I, Section 8, Clause 8.24(A), Fittted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. 91 S&F 30Mm Thick 2Nd Class Hardwood, Plain Framed, Framed, Panelled Shutter (Any Number Of Panels) With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers Fitted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. 92 S&F 600Mmx450Mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers All As Specified And Directed. 93 S&F 75Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. 94 S&F Pvc (Swr) Bends Any Radius With Access Door, 110Mm Dia. 95 S&F Pvc (Swr) Junction Single, (Single T) Equal Or Unequal, 110Mm Dia. 96 S&F Pvc Connections 15Mm Size With Ptmt Nuts Of Length 600Mm Complete All As Specified And Directed. 97 S&F Rotational Mounded Polythene Water Storage Tank Of 1000 Ltrs Capacity, (Multilayered, Cylindrical, Vertical With Closed Top) Hoisted And Fixed In Position As Specified In Ssr Pt-I. 98 S&F Sinks Made Of Stainless Steel Lmm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar On To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe, Overall Size 495Mm X 420Mm Bowl Size 410Mm X 330Mm X 160Mm 99 S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying And Fixing In Opening As Per Specification And Drawing. 100 S&F Ss Chromium Plated Shower Rose With Swival Joints With Shower Arm All As Specified And As Directed. 101 S&F Towel Rail 450Mm Long Of Ss Fixed With And Including Chromium Plated Brass Screws And Wooden/Plastic Cleats . 102 S/F 30 Mm Thick Flush Shutters,Solid Core Construction With Block Board Core And Plywood Face Panel, One Side Commercial Type And Other Side With Decorative Face Veneer With Lipping/Frame To Match , Complete All As Specified And Directed. 103 Suppiled Only Liquid Wpc 104 Supply And Fix Aluminium Anodized Barrel Tower Bolts Of Extruded Section, 150 Mm Long, Complete All As Specified And Directed. 105 Supply And Fix Pre- Painted Galvatume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specifie 106 Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Exc 1.5 Sqm But Not Exc 4.00 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. 107 Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Not Exc 1.5 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. 108 Taking Down Wall Panelling And Similar Work, Complete All As Specified And Directed By Engr-In-Charge. 109 Use And Waste Of Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work; Not Exceeding 200Mm Thick (Horizontal Or Sloping) 110 Taking Down Copper/Aluminium Point Wiring (Light, Fan, Socket Or Power) Complete, Including Fixture And Fittings Such As Switches, Ceiling Roses, Pendants, Regulators, Sockets, Light Fitting Etc.Removing Materials To Store For Keeping In Safe Custody Or For Taking Credit (Credit For Above Items Should Be Made As Per Conditions Separately) And Making Good Disturbed Surfaces Of Walls, Floors, Etc. 111 M & L For One Light Point Or One Fan Point Controlled By One Switch With 1.5 Sq. Mm Size Frlsh Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 1.5 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drown Through In And Incl Pvc Casing Capping With Its Accessories And Pvc Boxes For Fixing Switches/Sockets Etc. 112 M & L For One 3 Pin Socket Outlet, 5 Amps On The Same Board With Other Switches, With Cables 1.5 Sq. Mm Size Frlsh Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 1.5 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drawn Through In And Incl Pvc Casing Capping With Its Accessories And Pvc Boxes For Fixing Switches/Sockets Etc. 113 M & L For One 3 Pin Socket Outlet, 5 Amps, Independent, With Cables 1.5 Sq. Mm Size Frlsh Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 1.5 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drawn Through In And Incl Pvc Casing Capping With Its Accessories And Pvc Boxes For Fixing Switches/Sockets Etc. 114 M & L For One 3 Pin Socket Outlet, 15 Amps, Independent, With Cables 4 Sq. Mm Size Frlsh Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 4.0 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drawn Through In And Incl Pvc Casing Capping With Its Accessories And Pvc Boxes For Fixing Switches/Sockets Etc. 115 All As Per Item No 2 Above But 3 Pin Socket Out Let 15/16 Amps On The Independent Board All As Spfd With Single Core Unsheathed Pvc Insulated Cable Multistranded Copper Conductor Of Size 2.5 Sq Mm For Phase & Neutral & 2.5 Sq Mm For Earth Continuity Conductor. 116 S&F Switch Piano Flush Button Single Pole One Way 5/6 Amp. 117 S&F Socket Outlet 2 In 1, 3 Pin & 2 Pin, 5/6 Amp, 240 Volt. 118 S&F Socket Outlet 2 In 1 , 3 Pin & 2 Pin, 5/6 Amp And 15/16 Amp, 240 Volt. 119 S&F Switch Socket Combination 2 In 1, 5 A Flush Type. 120 S&F Sheet Metal Enclosure Distribution Box 4 Way Tpn 415 Volts With Suitable Size Of Rated Bus Bar Double Door Complete Including Connecting Up All As Specified . 121 S&F Switch Socket Combination 2 In 1, 3 Pin, 5 And 15 Amp Flush Type Universal. 122 S&F Ceiling Rose Surface Bakelite 65Mmx50Mm 100Watt Three Terminal. 123 S & F Lamp Holder, Pvc/Polycarbonate Type With Back Plate Suitable For Battern Fittings Complete. All As Specified And Directed By As Engineer-In-Charge. 124 S&F Led Bulb 9 Watt Cat Part No Led Adore 9W B22 Ww 2 Star Lamp Complete All As Specified And As Directed By Engineer-In-Charge. 125 Supply And Fixing Slimest Surface Panel Trim Clipon Panel Square Led Lights Fitting 18 W Led 4000 K, 220V,Ac Decorative With Driver, Holder Including Led Panel Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete As Specified. 126 Supply And Fixing Led Street Light Fitting 30 Watt 230 V Ac With Best In Class Design & Robust Heat Sink Along With Class Leading Ip,Ik Surge Protection For Long Lasting Performance With Complete Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection With All Fixing Arrangement All As Directed And As Specified. 127 Cutting Existing Steel Tubing 25 To 32 Mm Bore For Alterations Or Additions (Each Cut Measured) 128 S&F 3-Layer Pp-R Polypropylene Random Copolymer) 32 Mm Concealed Pipes Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc 129 M & L For Replacement Of Pp-R Gate Valves (Brass Insert) Of Size 32 Mm Bore As Per Requirement All As Directed And As Specified. 130 S&F Xlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade, Cross-Sectional Area 10 Sq. Mm 4.0 Core. 131 Supply And Fixing In Repair Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection Complete As Specified. 132 Supply And Fixing In Repair Led Lights Fitting 1X 20W, 220V,Ac Decorative Box Type With Driver, Holder Including Led Tube Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete As Specified. 133 Supply And Fixing In Repair Led Light Fitting Mirror Type With High Out Put Diffuser 2 Feet, 10 Watt 220 V Ac Decorative Type With Driver Holder And Led Lamp Including Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size Complete As Specified. 134 Supply And Fixing In Repair Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, 220 V Ac Recessed Type With High Efficiency Pmma Diffuser Soft Glare Free Light Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete. 135 S&F Of Single Pole And Neutral Sheet Metal Enclosure With A Two Pin And Earth Plug And Socket Complete With One Single Pole Mcb Sp 20 Amps, 240 Volts, Ac,50 Hz, Completete All As Directed And Specified, Including Taking Down Old Unserviceable Plug Socket And Offering For Credit. 136 Supply And Fix Exhaust Fan Made Of Sturdy Engineering Plastic Complete With Louvers Shutter, Voltage 230V, 50 Hz,Rpm 1200, Copper Winding Of Sweep 300 Mm Sweep With All Fixing Arrangement All As Specified And As Directed. 137 Supply And Fix Electric Water Heater, Storage Type Steel Body With Copper Inner Tank And Heating Element Upto 2 Kw Capacity 25 Litre, Bee 5 Star Rated Complete With All Accessories Such As Safety Valve, Thermostate, Nrv, Connection Piece Etc. 138 Supply And Fixing In Repair 415V 10Ka C Curve Miniature Circuit Breaker Tpn 40 To 100 Amp Poles And Current Carrying Capacity In The Db Complete With Connection Testing And Commissioning All As Directed And As Specified. 139 Supply And Fixing In Repair Led Lights Fitting 1X 18W, 4 Feet, 220V,Ac Decorative Box Type With Driver, Holder Including Led Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Including Taking Down Old Unserviceable Light Fitting Complete.

BOQ

Name of Work:-
Sl. No. Item Description
1Demolition of Concrete of any description and in any position not otherwise specifically provided for
2Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
3Dismantling boarding, any description, fixed in any position Fixed with screws
4Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
5Dismantling of framed timber scantlings 40 sq. cm and over in section, in any position
6Dismantling plain or corrugated steel sheeting any thickness, complete all as specified and directed.
7Dismantling stone slabs and tiles laid bedded and pointed in any mortar of anydescription or thickness infloors, aprons etc.
8Dismantling Timber scantling with framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq cm in section , in any position all as specified and directed.
9Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed.
10Dismantling wrought iron or mild steel work of any description not otherwise provided for
11M&L for 18mm prelaminated both sides with decorative choice laminations fixed with screws to timber frame work
12M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in CM 1:6 type C1 1:3:6, complete all as specified and directed.
13M&L for Preparation of new plastered surface of wall and applying two coat of cement base paint complete all as specified and directed.
14M&L for RCC type B1 1:24 on Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
15M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
16S & F 20mm 3-layer PP-R P o l y p r o p y l e n e random copolymer concealed pipes SDR 7.4 PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold watersupply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.
17S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.
18Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.(Fe-290 (Gde E -165).
19Demolition of Brickwork or stone/boulder masonry, laid dry built in cement mortar or cement lime mortar
20Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,
21Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil.
22Hacking out old broken glass (any hickness, size, quality )from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones
23M & L Chequered cement concrete tiles 20cm x 20cm x 25mm/30cm x 30cm x 25cm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement & pigment incl Screed bed or bedding layer of CM(1:6) 15 mm thick for laying floor finishes
24M & L for 350 x 250 x 7 mm/450 x 300 x 6-7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient/ Bell/ Johnson/ Somany).
25M & L for PCC 1:4:8 Type D-2 (using 40mm graded aggr) as in foundations, filling and mass concrete.
26M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.
27M & L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
28M & L for Providing, cement concrete in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
29M & L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finshed rough to receive tiles .
30M & L for second class hardwood plain fillets cross sectional area n exc 3 Sq cm . square, rectangular or triangular in section, clean sawn, secured with nails or brads
31M & L for soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey compbed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/SFRC cover, inter connecting pipes of RCC/DWC complete filled with brick bats of size.(1.20 mtr X 3.00 mtr)
32M & L Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
33M & L Virified Ceramic tiles (light shade) 8 mm to 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed with CM (1:6) 15 mm thick for laying floor tiles complete all as specified and directed.
34M&L 32mm Waste coupling of PTMT(half or full threaded) .(Minimum weight 32mm 45gms/40mm-60 gms)
35M&L fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed
36M&L for Rendering 15 mm thick CM (1:6) on fair faces in two layers of concrete surfaces of wall , finshing the surface even and smooth without using extra cement complete.
37M&L for 100 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as cement concrete in Sub-base floor and pavings etc complete all as specified.
38M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floor finishes.
39M&L for 2nd class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
40M&L for 3mm thick cover fillet of standard hard board, 40mm wide and fixing with screws complete all as specified and directed by Engr-in-Charge.
41M&L for 4mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work in ceiling, complete all as specified and directed by Engr-in-Charge.
42M&L for 6mm thick Plywood, grade BWR, type BB, fixed with nails to timber frame work (05 No of ply), complete all as specified and directed by Engr-in-Charge.
43M&L for 75 mm thick plain cement concrete type C-2, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement.
44M&L for broken stone or boulders hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface.
45M&L for Hallow/solid PVC wall panel plain in colour PVC Sheet inclusive of solvent cement and fixing at site on PVC/metal frame including 5mm fillet for wall panelling omplete all as specified and directed by Engr-in-Charge.
46M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound destemper, over a coat of primer complete all as specified and directed.
47M&L for prepration of old wooden surfaces of any description ,over 10cm in width or girth and applying two coats of finishing coat with synthetic Varnish complete all as specified and directed.
48M&L for Providing precast cement concrete type B1 1:2:4 (20mm graded stone aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed)setting in mortar 1:6 ,complete, in walls
49M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.
50M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6, complete all as specified and directed.
51M&L for second class hard wood in scantling, clean sawn, timber framed and fixed, complete all as specified and directed by Engr-in-Charge.
52M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
53M&L TMT bars Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips →
54Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
55Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment (Fe-290 (Gde E -165).
56Removing excavated soils n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point.
57Returning, filling in including spreading, levelling, watering and well remming in layers n exc 25 cm in hard/dense soil.
58S & F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21
59S & F 100mm Cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete.
60S & F 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
61S & F 20 mm PP-R Gate valves (brass insert) as per requirement of the site.
62S & F 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane.
63S & F 4.0mm thick figured glass, pin head type and glazing with oil putty in squares nexc 0.5 sq. m in each pane.
64S & F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed (Bore dia of pipe in 25mm)
65S & F Cover fillets of tempered hard board 6 mm thick, 40mm wide and fixing with screws
66S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing.
67S & F for waste pipe 32mm dia,complete with 80cm long flexible for WHB fixed complete all as specified and directed .
68S & F on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8: below foundation, vent shaft, connection etc, complete for 20 users.
69S & F PVC (SWR) couplers, 110mm dia
70S & F PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets.
71S & F Soap dish, SS , approximate size 160x 160x90mm
72S & F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete.
73S & F Two way CP bib cock with 2 handles and wall flange for water closet.
74S & F vitreous China squatting pan, ‘Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete.
75S & F Vitreous Cliina wash basin, wlhite, flat back, size 550x400 irun excluding taps, waste, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand
76S & F Waste coupling of SS (half or full threaded)
77S &F 15mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms).
78S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plugs but including brackets complete all as specified and directed.
79S&F fancy type Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed
80S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
81S&F 100 mm butt hinges, mediam weight, cold rolled mild steel and fixed complete all as specified and directed by Engr-in-Charge.
82S&F 100mm aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.
83S&F 100mm Aluminium handles, cast type, anodised complete all as specified and directed by Engr-in-Charge.
84S & F 125mm size extruded aluminium handles, cast type anodised.
85S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
86S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed by Engr-in-Charge.
87S&F 200mm aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.
88S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engr-in-Charge.
89S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.
90S&F 30mm thick 2nd class hardwood, Glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shuters as specified in SSR Part-I, Section 8, clause 8.24(a), fittted to chowkats, complete all as specified and directed by Engr-in-Charge.
91S&F 30mm thick 2nd class hardwood, Plain framed, framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats, complete all as specified and directed by Engr-in-Charge.
92S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed.
93S&F 75mm butt hinges, mediam weight, cold rolled mild steel and fixed complete all as specified and directed by Engr-in-Charge.
94S&F PVC (SWR) bends any radius with access door, 110mm dia.
95S&F PVC (SWR) junction single, (single T) equal or unequal, 110mm dia.
96S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
97S&F Rotational mounded polythene water storage tank of 1000 ltrs capacity, (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position as specified in SSR Pt-I.
98S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm
99S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing.
100S&F SS chromium plated shower rose with swival joints with shower arm all as specified and as directed.
101S&F Towel Rail 450mm long of SS fixed with and including Chromium plated brass screws and wooden/plastic cleats .
102S/F 30 mm thick flush shutters,solid core construction with block board core and plywood face panel, one side commercial type and other side with decorative face veneer with lipping/frame to match , complete all as specified and directed.
103Suppiled only liquid WPC
104Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long, complete all as specified and directed.
105Supply and fix Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifie
106Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.00 sqm each, complete all as specified and directed by Engr-in-Charge.
107Taking down chowkhats with shutters (without taking off shutters from the frame) not exc 1.5 sqm each, complete all as specified and directed by Engr-in-Charge.
108Taking down Wall panelling and similar work, complete all as specified and directed by Engr-in-Charge.
109Use and Waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
110Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
111M & L for One light point or one fan point controlled by one switch with 1.5 sq. mm size FRLSH PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drown through in and incl PVC casing capping with its accessories and PVC Boxes for fixing switches/sockets etc.
112M & L for One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size FRLSH PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drawn through in and incl PVC casing capping with its accessories and PVC Boxes for fixing switches/sockets etc.
113M & L for One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size FRLSH PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drawn through in and incl PVC casing capping with its accessories and PVC Boxes for fixing switches/sockets etc.
114M & L for One 3 pin socket outlet, 15 Amps, independent, with cables 4 sq. mm size FRLSH PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 4.0 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drawn through in and incl PVC casing capping with its accessories and PVC Boxes for fixing switches/sockets etc.
115All as per item No 2 above but 3 pin socket out let 15/16 Amps on the independent Board all as spfd with single core unsheathed PVC insulated cable multistranded copper conductor of size 2.5 sq mm for phase & neutral & 2.5 sq mm for earth continuity conductor.
116S&F Switch Piano Flush button single pole one way 5/6 Amp.
117S&F socket outlet 2 in 1, 3 pin & 2 pin, 5/6 Amp, 240 volt.
118S&F socket outlet 2 in 1 , 3 pin & 2 pin, 5/6 Amp and 15/16 Amp, 240 volt.
119S&F Switch socket combination 2 in 1, 5 A flush type.
120S&F sheet metal enclosure distribution box 4 way TPN 415 volts with suitable size of rated bus bar double door complete including connecting up all as specified .
121S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type Universal.
122S&F ceiling rose surface bakelite 65mmx50mm 100watt three terminal.
123S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for battern fittings complete. all as specified and directed by as engineer-in-charge.
124S&F LED Bulb 9 watt cat part no LED ADORE 9W B22 WW 2 STAR LAMP complete all as specified and as directed by engineer-in-charge.
125Supply and fixing slimest surface panel TRIM CLIPON PANEL SQUARE LED lights fitting 18 W LED 4000 K, 220V,AC decorative with driver, holder including LED panel light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete as specified.
126Supply and fixing LED street light fitting 30 Watt 230 V AC with best in class design & robust heat sink along with class leading IP,IK surge protection for long lasting performance with complete driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with all fixing arrangement all as directed and as specified.
127Cutting existing steel tubing 25 to 32 mm bore for alterations or additions (Each cut measured)
128S&F 3-layer PP-R Polypropylene random copolymer) 32 mm concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc
129M & L for replacement of PP-R Gate valves (brass insert) of size 32 mm bore as per requirement all as directed and as specified.
130S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 4.0 Core.
131Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete as specified.
132Supply and fixing in repair LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete as specified.
133Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete as specified.
134Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
135S&F of Single pole and neutral Sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps, 240 Volts, AC,50 HZ, completete all as directed and specified, including taking down old unserviceable plug socket and offering for credit.
136Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300 mm sweep with all fixing arrangement all as specified and as directed.
137Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.
138Supply and fixing in repair 415V 10KA 'C' curve miniature circuit breaker TPN 40 To 100 AMP poles and current carrying capacity in the DB complete with connection testing and commissioning all as directed and as specified.
139Supply and fixing in repair LED lights fitting 1x 18W, 4 feet, 220V,AC decorative box type with driver, holder including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fitting complete.
140S&F in repair sheet metal enclosure double door for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door (Metallic) type including taking down old Distribution Board and MCBs all as specified and directed .
141M&L for sub main wiring with two single core PVC insulated of size 6.00 sqmm FRLS unsheathed copper conductor 1100 volt grade multistandard and incl drawn through and including PVC Casing caping including 6.00 sqmm FRLS copper wire for earth continuity wire and connected of common earth dolly Including taking down old unserviceable sub main wiring and making good of existing surface.Note:- (i)One run of PVC Casing caping, two run of 6.00 sq mm copper conductor & one run of 6.00 sq mm copper conductor is measured as one unit.
142S&F MCB SP 5 to 32 Amps 240 volts 'C' series, 10 KA, 50 Hz including connection in the DB and testing/commissioning. Make:- As approved Make of DB.
143S&F MCB SPN 40 Amps 240 volts 'C' series, 10 KA, 50 Hz. Make:- As approved Make of DB
144Excavation in soft/loose soil trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out incl old U/s cable cover of any type , taking out/laying/cleaning/repairing of CI/GI pipe line, cable etc including making good to disturbed surfaces complete all as specified and directed.
145S&F in repair XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2.0 Core including taking down old one.
146S&F Double walled corrugated (DWC ) pipe conforming to IS 14930(Part-II) pipe of outer dia 50 mm and inner dia 38 mm includind taking out old unservicable pipe all as specified and as directed
147S&F in repairhigh density polyethylene pipes (HDPE) of pressure rating 6Kgf/cm2 laid in trenches of size 25 mm dia all as specified and directed by Engr-in-Charge.
148Supply and laying or fixing or passing through pipeXLPE insulated, armouredheavy duty electric cable with aluminium conductor, 1100 volts grade of size 25 sqmm 3.5 core complete all as specified and directed by Engineer in charge.
149S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4.0 Core including taking down old one.
150S&F High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches of size 50 mm bore.
151S&F GI Pipe 50 mm bore, 'light grade',galvanised,with all fitting;laid in trenches.
152Material and Labour in repair for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in electrical plate No 3 of SSR Pt I including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick pre cast RCC ( 1:2:4) type B-1 cover slab framed with 50X30X4 mm MS angle (reinforced with 6 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar) including providing charcoal or coke and magnesium sulphate in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh, copper lugs, complete in all respect., GI earth wire protected by 40 mm bore (light grade) galvanized iron pipe and other end connected to the earth bar (test point) made of MS flat (400X32X6 mm) bend in ‘D’ shape and fixed to wall by means of fast nut or bolt grouted in to wall at 1 mtr from plinth height. 4sqmm PVC insulated (colour green) copper conductor single run as earth continuity conductor along with 15 mm PVC conduit grouted in wall or fixed on wall surface to be continued up to main switch board and fix with common earth dolly as directed by EIC . Disposal of soil to a distance not exceeding 50 mtr and necessary testing on completion complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56866321
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 47.41 Lakhs
LAST DATE 27-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Provision Of Various Special Repair And Revenue Works At Tawang Mil Stn Under Ge 859 Ews- 1 Demolition Of Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For 2 Demolition Of Concrete In Ground Floors And Pavings N Exc 15 Cm Thickness (Below Or Above Ground Level) 3 Dismantling Boarding, Any Description, Fixed In Any Position Fixed With Screws 4 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified And Directed. 5 Dismantling Of Framed Timber Scantlings 40 Sq. Cm And Over In Section, In Any Position 6 Dismantling Plain Or Corrugated Steel Sheeting Any Thickness, Complete All As Specified And Directed. 7 Dismantling Stone Slabs And Tiles Laid Bedded And Pointed In Any Mortar Of Anydescription Or Thickness Infloors, Aprons Etc. 8 Dismantling Timber Scantling With Framed Work In Fillets, Rails, Posts, Rafters, Purlins, Etc. Under 40 Sq Cm In Section , In Any Position All As Specified And Directed. 9 Dismantling Wall And Ceiling Boards Of Any Description Including Cover Fillets Complete All As Specified And Directed. 10 Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For 11 M&L For 18Mm Prelaminated Both Sides With Decorative Choice Laminations Fixed With Screws To Timber Frame Work 12 M&L For Pre-Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Setting In Cm 1:6 Type C1 1:3:6, Complete All As Specified And Directed. 13 M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Complete All As Specified And Directed. 14 M&L For Rcc Type B1 1:24 On Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like 15 M&L Machine Cut Kota Stone Slab Flooring 20-25Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete 16 S & F 20Mm 3-Layer Pp-R P O L Y P R O P Y L E N E Random Copolymer Concealed Pipes Sdr 7.4 Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Watersupply Including All Pp-R Plain & Brass Threaded P O L Y P R O P Y L E N E Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. 17 S&F 4Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed. 18 Compound Girders And Stanchions, Lattice Girders, Aerial Masts, Staging For Water Tanks And The Like Including Caps, Bases, Splices Etc. Built Up From Two Or More Beam Or Channel Sections Or Angles With Plates, Including All Lattice Bars, Stiffeners, Gusset Plates, Etc.(Fe-290 (Gde E -165). 19 Demolition Of Brickwork Or Stone/Boulder Masonry, Laid Dry Built In Cement Mortar Or Cement Lime Mortar 20 Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cu. M, Getting Out In Hard/Dense Soil, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25 Cm, 21 Excavation In Trenches N.Exc 1.5 M Wide And N.Exc 1.5 M Deep For Foundation Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Hard/Dense Soil. 22 Hacking Out Old Broken Glass (Any Hickness, Size, Quality )From Metal Frame Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones 23 M & L Chequered Cement Concrete Tiles 20Cm X 20Cm X 25Mm/30Cm X 30Cm X 25Cm Thick, Set, Jointed And Pointed In Neat Cement Slurry In Floors With Grey Pigment Cement & Pigment Incl Screed Bed Or Bedding Layer Of Cm(1:6) 15 Mm Thick For Laying Floor Finishes 24 M & L For 350 X 250 X 7 Mm/450 X 300 X 6-7 Mm Thick Glazed Coloured Ceramic Tiles On Vertical Surface Of Wall Set And Jointed In Neat Cement Slurry And Pointed In White/Coloured Cement To Match The Shade. (Make; Kajaria/ Orient/ Bell/ Johnson/ Somany). 25 M & L For Pcc 1:4:8 Type D-2 (Using 40Mm Graded Aggr) As In Foundations, Filling And Mass Concrete. 26 M & L For Preparation Of New Steel Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Zinc Chrome Primer Complete All As Specified. 27 M & L For Preparation Of New Wooden Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified. 28 M & L For Providing, Cement Concrete In In Lintels Upto 1.5M Clear Span, Cills, Steps; Seismic And Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets And Railings Upto 60 Cm In Height, Copings, Kneelers, Apex Stones, Bed Plates, Kerbs Not Provided For In Item 04028, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating, As Directed 29 M & L For Rendering 10 Mm Thick In Cm (1:4) On Fair Faces Of Brick Work Or Concrete Surfaces Finshed Rough To Receive Tiles . 30 M & L For Second Class Hardwood Plain Fillets Cross Sectional Area N Exc 3 Sq Cm . Square, Rectangular Or Triangular In Section, Clean Sawn, Secured With Nails Or Brads 31 M & L For Soakage Wells Excavation, In Any Type Of Soil, Foundation In Pcc 1:3:6, Walls Of Honey Compbed Masonry With Top Ring Of M25 Concrete Including Intercepting Chamber And Screen Chamber Made Of Brick Masonry In Cm, Rcc Cover Slab In M25/Sfrc Cover, Inter Connecting Pipes Of Rcc/Dwc Complete Filled With Brick Bats Of Size.(1.20 Mtr X 3.00 Mtr) 32 M & L Mild Steel Bars 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips. 33 M & L Virified Ceramic Tiles (Light Shade) 8 Mm To 9 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Incl Screed Bed With Cm (1:6) 15 Mm Thick For Laying Floor Tiles Complete All As Specified And Directed. 34 M&L 32Mm Waste Coupling Of Ptmt(Half Or Full Threaded) .(Minimum Weight 32Mm 45Gms/40Mm-60 Gms) 35 M&L Fancy Type Pillar Taps, Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed 36 M&L For Rendering 15 Mm Thick Cm (1:6) On Fair Faces In Two Layers Of Concrete Surfaces Of Wall , Finshing The Surface Even And Smooth Without Using Extra Cement Complete. 37 M&L For 100 Mm Thick Pcc 1:3:6 Type C2 (Using 40 Mm Graded Stone Aggregate) As Cement Concrete In Sub-Base Floor And Pavings Etc Complete All As Specified. 38 M&L For 25 Mm Thick Pcc 1:2:4 Type B-0 (Using 12.5 Mm Graded Stone Aggregate) As In Floor Finishes. 39 M&L For 2Nd Class Hard Wood 30Mm Thick Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc. (Without Sash Bars), Edges Of Framing Plain, Chamfered Or Rounded. Fitted With Cut And Mitred Beads For Securing Glass, Etc.; Sizes Of Me-Mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A); Supplied And Fitted To Chowkats Complete All As Specified And Directed. 40 M&L For 3Mm Thick Cover Fillet Of Standard Hard Board, 40Mm Wide And Fixing With Screws Complete All As Specified And Directed By Engr-In-Charge. 41 M&L For 4Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Screws To Timber Frame Work In Ceiling, Complete All As Specified And Directed By Engr-In-Charge. 42 M&L For 6Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work (05 No Of Ply), Complete All As Specified And Directed By Engr-In-Charge. 43 M&L For 75 Mm Thick Plain Cement Concrete Type C-2, 1:3:6, (40Mm Graded Stone Aggregate)As In Plinth Protection, Finishing The Top Surfaces Even And Smooth W/O Using Extra Cement. 44 M&L For Broken Stone Or Boulders Hard Core Of Gauge N.Exc 63Mm, Deposited, Spread And Levelled In Layers Nexc 15 Cm Thick, Watered And Rammed To A True Surface. 45 M&L For Hallow/Solid Pvc Wall Panel Plain In Colour Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc/Metal Frame Including 5Mm Fillet For Wall Panelling Omplete All As Specified And Directed By Engr-In-Charge. 46 M&L For Preparation Of Newly Plastered Surfaces Of Walls And Applying Two Coats Of Oil Bound Destemper, Over A Coat Of Primer Complete All As Specified And Directed. 47 M&L For Prepration Of Old Wooden Surfaces Of Any Description ,Over 10Cm In Width Or Girth And Applying Two Coats Of Finishing Coat With Synthetic Varnish Complete All As Specified And Directed. 48 M&L For Providing Precast Cement Concrete Type B1 1:2:4 (20Mm Graded Stone Aggregate) Solid Building Blocks Or Slabs 10Cm Thick (With Plain Or Interlocking Joints As Directed)Setting In Mortar 1:6 ,Complete, In Walls 49 M&L For Rendering 15Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 Complete All As Specified And Directed. 50 M&L For Screed Bed Or Bedding Layer Of Mortar 15Mm Thick For Laying Floor Finishes In Cm 1:6, Complete All As Specified And Directed. 51 M&L For Second Class Hard Wood In Scantling, Clean Sawn, Timber Framed And Fixed, Complete All As Specified And Directed By Engr-In-Charge. 52 M&L Non - Skid Ceramic Tiles 7 To 8 Mm Thick (Square/Rectangular) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match 53 M&L Tmt Bars Mild Steel Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips → 54 Material & Labour For Applying Two Or More Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Over New Surfaces. 55 Plates (Plain Or Chequered) Channels, Square Cut Or Notched (Ordinary And Counter Sunk) Forming Holes, With Riveted, Bolted Or Welded Attachment (Fe-290 (Gde E -165). 56 Removing Excavated Soils N.Exc 50M And Depositing Where Directed At A Level N Exc 1.5M Above The Starting Point. 57 Returning, Filling In Including Spreading, Levelling, Watering And Well Remming In Layers N Exc 25 Cm In Hard/Dense Soil. 58 S & F 100Mm Butt Hinges, Extruded Aluminium Alloy With Galvanised Mild Steel Hinge Pin, Anodised And Fixed, Type B-21 59 S & F 100Mm Cast Iron Nahani Trap, With Grating Including Jointing To Waste Pipe Fixed In Cement Concrete Type B-1 (1:2:4) Complete. 60 S & F 15Mm Pillar Taps, Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed. 61 S & F 20 Mm Pp-R Gate Valves (Brass Insert) As Per Requirement Of The Site. 62 S & F 3.0Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.50 Sqm In Each Pane. 63 S & F 4.0Mm Thick Figured Glass, Pin Head Type And Glazing With Oil Putty In Squares Nexc 0.5 Sq. M In Each Pane. 64 S & F Ball Brass Valves, High Pressure, With Polythene Float And Flynut Complete, Screwed For Iron Pipe Or Brass Ferrule And Fixed (Bore Dia Of Pipe In 25Mm) 65 S & F Cover Fillets Of Tempered Hard Board 6 Mm Thick, 40Mm Wide And Fixing With Screws 66 S & F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails. Ms Frame Shall Be Covered With Heat Moulded Plain Colour Pvc C Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail, Panelling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Frame Welded/Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading And Joined Together With Solvent Cement Supplying & Fixing In The Frame At Site As Per Specification & Drawing. 67 S & F For Waste Pipe 32Mm Dia,Complete With 80Cm Long Flexible For Whb Fixed Complete All As Specified And Directed . 68 S & F On Site Lldpe Septic Tank Designed To Carry Sewage And Sullage Water, Excavation In Any Type Of Soil, Pcc 1:4:8: Below Foundation, Vent Shaft, Connection Etc, Complete For 20 Users. 69 S & F Pvc (Swr) Couplers, 110Mm Dia 70 S & F Pvc Valveless, Syphonic Action Type, Flushing Cistern 10 Litres Capacity, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Brackets. 71 S & F Soap Dish, Ss , Approximate Size 160X 160X90Mm 72 S & F Steel Ventilators With Centre Hung Shutter Including Two Pairs Of Brass Cup Pivots, Catch Spring And Pulley Wheel, Complete. 73 S & F Two Way Cp Bib Cock With 2 Handles And Wall Flange For Water Closet. 74 S & F Vitreous China Squatting Pan, ‘Orissa Pattern, Size 580 X 440 Mm White, With Integral Foot Rests (Excluding Flushing Cistern And Flush Pipe) Complete. 75 S & F Vitreous Cliina Wash Basin, Wlhite, Flat Back, Size 550X400 Irun Excluding Taps, Waste, Chain And Plug And Porcelain Stopper But Including Cutting For And Pinning In Ends Of Brackets Or Erecting Stand 76 S & F Waste Coupling Of Ss (Half Or Full Threaded) 77 S &F 15Mm Angle Stop Valve Of Ptmt Any Colour High Pressure Screwed For Iron Pipe And Fixed, (Minimum Weight 15Mm-90Gms). 78 S&F In Repairs Vitreous China Wash Basin, White, Flat Back, Size 550X400Mm Excluding Taps, Waste, Chain And Plugs But Including Brackets Complete All As Specified And Directed. 79 S&F Fancy Type Stop Valves, Cast Copper Alloy,Screwed Down,High Pressure,With Crutch Or Butterfly Handle,Screwed Both Ends For Iron Pipe Or For Unions And Fixed 80 S&F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified 81 S&F 100 Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. 82 S&F 100Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. 83 S&F 100Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. 84 S & F 125Mm Size Extruded Aluminium Handles, Cast Type Anodised. 85 S&F 110Mm Bore Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches Or In Floors 86 S&F 150Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. 87 S&F 200Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. 88 S&F 250Mm Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed, Complete All As Specified And Directed By Engr-In-Charge. 89 S&F 2Nd Class Hardwood Plain, Solid, Straight Chowkats And Frames, Wrought Framed Rebated On The Solid, Rounded Or Chamfered Put Together With Glue Pinned At Joints, Complete All As Specified And Directed By Engr-In-Charge. 90 S&F 30Mm Thick 2Nd Class Hardwood, Glazed And Skelton Shutters, Open Rebated And Prepared To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shuters As Specified In Ssr Part-I, Section 8, Clause 8.24(A), Fittted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. 91 S&F 30Mm Thick 2Nd Class Hardwood, Plain Framed, Framed, Panelled Shutter (Any Number Of Panels) With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers Fitted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. 92 S&F 600Mmx450Mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers All As Specified And Directed. 93 S&F 75Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. 94 S&F Pvc (Swr) Bends Any Radius With Access Door, 110Mm Dia. 95 S&F Pvc (Swr) Junction Single, (Single T) Equal Or Unequal, 110Mm Dia. 96 S&F Pvc Connections 15Mm Size With Ptmt Nuts Of Length 600Mm Complete All As Specified And Directed. 97 S&F Rotational Mounded Polythene Water Storage Tank Of 1000 Ltrs Capacity, (Multilayered, Cylindrical, Vertical With Closed Top) Hoisted And Fixed In Position As Specified In Ssr Pt-I. 98 S&F Sinks Made Of Stainless Steel Lmm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar On To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe, Overall Size 495Mm X 420Mm Bowl Size 410Mm X 330Mm X 160Mm 99 S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying And Fixing In Opening As Per Specification And Drawing. 100 S&F Ss Chromium Plated Shower Rose With Swival Joints With Shower Arm All As Specified And As Directed. 101 S&F Towel Rail 450Mm Long Of Ss Fixed With And Including Chromium Plated Brass Screws And Wooden/Plastic Cleats . 102 S/F 30 Mm Thick Flush Shutters,Solid Core Construction With Block Board Core And Plywood Face Panel, One Side Commercial Type And Other Side With Decorative Face Veneer With Lipping/Frame To Match , Complete All As Specified And Directed. 103 Suppiled Only Liquid Wpc 104 Supply And Fix Aluminium Anodized Barrel Tower Bolts Of Extruded Section, 150 Mm Long, Complete All As Specified And Directed. 105 Supply And Fix Pre- Painted Galvatume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specifie 106 Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Exc 1.5 Sqm But Not Exc 4.00 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. 107 Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Not Exc 1.5 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. 108 Taking Down Wall Panelling And Similar Work, Complete All As Specified And Directed By Engr-In-Charge. 109 Use And Waste Of Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work; Not Exceeding 200Mm Thick (Horizontal Or Sloping) 110 Taking Down Copper/Aluminium Point Wiring (Light, Fan, Socket Or Power) Complete, Including Fixture And Fittings Such As Switches, Ceiling Roses, Pendants, Regulators, Sockets, Light Fitting Etc.Removing Materials To Store For Keeping In Safe Custody Or For Taking Credit (Credit For Above Items Should Be Made As Per Conditions Separately) And Making Good Disturbed Surfaces Of Walls, Floors, Etc. 111 M & L For One Light Point Or One Fan Point Controlled By One Switch With 1.5 Sq. Mm Size Frlsh Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 1.5 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drown Through In And Incl Pvc Casing Capping With Its Accessories And Pvc Boxes For Fixing Switches/Sockets Etc. 112 M & L For One 3 Pin Socket Outlet, 5 Amps On The Same Board With Other Switches, With Cables 1.5 Sq. Mm Size Frlsh Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 1.5 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drawn Through In And Incl Pvc Casing Capping With Its Accessories And Pvc Boxes For Fixing Switches/Sockets Etc. 113 M & L For One 3 Pin Socket Outlet, 5 Amps, Independent, With Cables 1.5 Sq. Mm Size Frlsh Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 1.5 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drawn Through In And Incl Pvc Casing Capping With Its Accessories And Pvc Boxes For Fixing Switches/Sockets Etc. 114 M & L For One 3 Pin Socket Outlet, 15 Amps, Independent, With Cables 4 Sq. Mm Size Frlsh Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 4.0 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drawn Through In And Incl Pvc Casing Capping With Its Accessories And Pvc Boxes For Fixing Switches/Sockets Etc. 115 All As Per Item No 2 Above But 3 Pin Socket Out Let 15/16 Amps On The Independent Board All As Spfd With Single Core Unsheathed Pvc Insulated Cable Multistranded Copper Conductor Of Size 2.5 Sq Mm For Phase & Neutral & 2.5 Sq Mm For Earth Continuity Conductor. 116 S&F Switch Piano Flush Button Single Pole One Way 5/6 Amp. 117 S&F Socket Outlet 2 In 1, 3 Pin & 2 Pin, 5/6 Amp, 240 Volt. 118 S&F Socket Outlet 2 In 1 , 3 Pin & 2 Pin, 5/6 Amp And 15/16 Amp, 240 Volt. 119 S&F Switch Socket Combination 2 In 1, 5 A Flush Type. 120 S&F Sheet Metal Enclosure Distribution Box 4 Way Tpn 415 Volts With Suitable Size Of Rated Bus Bar Double Door Complete Including Connecting Up All As Specified . 121 S&F Switch Socket Combination 2 In 1, 3 Pin, 5 And 15 Amp Flush Type Universal. 122 S&F Ceiling Rose Surface Bakelite 65Mmx50Mm 100Watt Three Terminal. 123 S & F Lamp Holder, Pvc/Polycarbonate Type With Back Plate Suitable For Battern Fittings Complete. All As Specified And Directed By As Engineer-In-Charge. 124 S&F Led Bulb 9 Watt Cat Part No Led Adore 9W B22 Ww 2 Star Lamp Complete All As Specified And As Directed By Engineer-In-Charge. 125 Supply And Fixing Slimest Surface Panel Trim Clipon Panel Square Led Lights Fitting 18 W Led 4000 K, 220V,Ac Decorative With Driver, Holder Including Led Panel Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete As Specified. 126 Supply And Fixing Led Street Light Fitting 30 Watt 230 V Ac With Best In Class Design & Robust Heat Sink Along With Class Leading Ip,Ik Surge Protection For Long Lasting Performance With Complete Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection With All Fixing Arrangement All As Directed And As Specified. 127 Cutting Existing Steel Tubing 25 To 32 Mm Bore For Alterations Or Additions (Each Cut Measured) 128 S&F 3-Layer Pp-R Polypropylene Random Copolymer) 32 Mm Concealed Pipes Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc 129 M & L For Replacement Of Pp-R Gate Valves (Brass Insert) Of Size 32 Mm Bore As Per Requirement All As Directed And As Specified. 130 S&F Xlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade, Cross-Sectional Area 10 Sq. Mm 4.0 Core. 131 Supply And Fixing In Repair Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection Complete As Specified. 132 Supply And Fixing In Repair Led Lights Fitting 1X 20W, 220V,Ac Decorative Box Type With Driver, Holder Including Led Tube Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete As Specified. 133 Supply And Fixing In Repair Led Light Fitting Mirror Type With High Out Put Diffuser 2 Feet, 10 Watt 220 V Ac Decorative Type With Driver Holder And Led Lamp Including Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size Complete As Specified. 134 Supply And Fixing In Repair Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, 220 V Ac Recessed Type With High Efficiency Pmma Diffuser Soft Glare Free Light Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete. 135 S&F Of Single Pole And Neutral Sheet Metal Enclosure With A Two Pin And Earth Plug And Socket Complete With One Single Pole Mcb Sp 20 Amps, 240 Volts, Ac,50 Hz, Completete All As Directed And Specified, Including Taking Down Old Unserviceable Plug Socket And Offering For Credit. 136 Supply And Fix Exhaust Fan Made Of Sturdy Engineering Plastic Complete With Louvers Shutter, Voltage 230V, 50 Hz,Rpm 1200, Copper Winding Of Sweep 300 Mm Sweep With All Fixing Arrangement All As Specified And As Directed. 137 Supply And Fix Electric Water Heater, Storage Type Steel Body With Copper Inner Tank And Heating Element Upto 2 Kw Capacity 25 Litre, Bee 5 Star Rated Complete With All Accessories Such As Safety Valve, Thermostate, Nrv, Connection Piece Etc. 138 Supply And Fixing In Repair 415V 10Ka C Curve Miniature Circuit Breaker Tpn 40 To 100 Amp Poles And Current Carrying Capacity In The Db Complete With Connection Testing And Commissioning All As Directed And As Specified. 139 Supply And Fixing In Repair Led Lights Fitting 1X 18W, 4 Feet, 220V,Ac Decorative Box Type With Driver, Holder Including Led Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Including Taking Down Old Unserviceable Light Fitting Complete.
Basic Detail
Tender No 9063/E8
Bidding Type Tender
Location
City Tawang
State Arunachal Pradesh
Key Dates
Publish Date 06 Aug 2026
Submission Date 27 Aug 2026
Open Date 28 Aug 2026
Finance
Tender Value 47.41 Lakhs
Tender Fee 500
EMD 95000
Exemption Available
Document List
37012a66-177d-4dca-b9a9-2882d94e4d41.html
BOQ_877024.xls
Tenderdocuments.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Aug 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
html

37012a66-177d-4dca-b9a9-2882d94e4d41.html

xls

BOQ_877024.xls

pdf

Tenderdocuments.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders