Tender For Comprehensive Maintenance Of Otm Accommodation Under Zone-A At Mil Stn Kasauli Under Ge Kasauli.
Tender Value
42 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
21 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance Of Otm Accommodation Under Zone-A At Mil Stn Kasauli Under Ge Kasauli.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Section - I |
| 2 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified |
| 3 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 4 | Supply and fixing for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified. |
| 5 | Supply and fixing for Fibre glass 2mm thick reinforced translucent corrugated sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc. complete all as specified and directed. |
| 6 | Supply and fixing for Galvanised,0.63 mm thick corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screws as specified. |
| 7 | Supply and fixing plain, galvanised, 0.63mm thick, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing fixed with self tapping screws as specified. |
| 8 | Dismantling timber scantlings in unframed works 40sq. cm and over in section, in any position |
| 9 | Material and labour 2nd class HW clean Sawn timber as in scantling in Roof & ceiling complete all as specified. |
| 10 | Dismantling wall as ceiling board (fibre, pulp, insulation, etc) or insulation boards/slabs/kitchen cup board, any thickness, including cover fillets |
| 11 | Supply and fixing Plywood 6mm thick, grade BWR, type BB, fixed with screws to timber frame work in ceiling complete all as specified and as directed. |
| 12 | Material and labour for Plain fillets 2nd class hard wood exe 13 sqcm and not exe. 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads fixed in repair including dismantling timber scantlings 40 sqcm and under in section, in ceiling complete all as specified and directed. |
| 13 | Material and labour for Plain fillets 2nd class hard wood exe 6 sqcm and not exe. 13 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads fixed complete all as specified and directed. |
| 14 | Supply and fixing GI metal suspended ceiling system, GI lay in plain of 600x600x0.5mm (TEGULAR) edge tiles in globel white colour to be laid on strong 24mm Tee section flanges colour white having roatary stiching on the main runner with web height of 38mm complete all as specified and directed Note- (i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffits at 1200mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200mmx600mm module. Cut cross tees longer than 600mm required independent support. 600mmx600mm module to be found by fittings 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trime to be wall angles of size 3000mm x 19mm x 19mm secured to walls at 450mm maximum centres. (ii) The HCL sleeve anchor fastnor of thread size 6.50mm x 25/5 with soffits cleat made of galvanised steel of size 27x37x25x1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire complete all as specified and as directed. |
| 15 | Material and labour for Brick work with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 , including Demolition of Brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and as directed. |
| 16 | Supply and fixing coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3, complete all as specified, including dismantling existing wall tiling including cement mortar bedding (but not backing) |
| 17 | Material and labour for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed, including dismantling floor tiling including cement mortar bedding (but not backing) |
| 18 | Material and labour for Virified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15 mm thick screed bed 1:6 complete all as specified.including dismantling floor tiling including cement mortar bedding (but not backing) |
| 19 | Supply and fixed 18-20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc all as specified and directed.including demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. |
| 20 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar sitution. |
| 21 | Material and labour for Coloured Prepolished chequered cement conc tiles (30cmx30cmx25mm thick) in white cement and pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified, including dismantling floor tiling including cement mortar bedding (but not backing) |
| 22 | Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified. |
| 23 | Material and labour for PCC 100 mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring all as specified and directed. |
| 24 | Demolition of Reinforcement Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified. |
| 25 | Material and Labour for providing Reinforced cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, Beams, cantilevers, bressummers, all as specified. Note : (Reinforce bar paid and measured separately) |
| 26 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, for rough finished surface of concrete. |
| 27 | Material and labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed . |
| 28 | Material and labour for Rendering 15mm thick in cement plaster 1:6 on Brick work incl finishing surface fair and even w/o using extra cement complete all as specified and as directed, including Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 29 | Material and labour for rendering 15mm thick on fair faces of brick or concrete surface in CM 1:4 finished even and smooth with out using extra cement including Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed. |
| 30 | Material and labour for preparation of plastered or unplastered new surfaces of walls of and applying two coat of cement base paint over a coat of cement priming coat of any approved tint complete all as specified & as directed. |
| 31 | Material and labour for preparation of new plastered surface and applying two coats of oil bound distemper on wall over a coat of 2mm th wall care putty over coat of chalk whiting primer. |
| 32 | Taking down chowkats or frames without taking down shutters from the frame exc. 1.5 sq. m but n.exc.4 sqm each complete all as specified. |
| 33 | Taking down shutter of any description, exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified. |
| 34 | Taking down chowkats or frames without taking down shutters from the frame n exc. 1.5 sq. m each complete all as specified. |
| 35 | Taking down and refixing in same location after making nessary repair and make the shutter fit for use, shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed . |
| 36 | Supplied and Fixed IInd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 37 | Supply and Fixing 35mm thick, 2nd class HW, Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed . |
| 38 | Supply and Fixing IInd Class HW 35mm thick, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats, complete all as specified. |
| 39 | Supply and Fixing 30mm thick 2nd class hardwood, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified and as directed . |
| 40 | Supply and fixing Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification. |
| 41 | Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded premale PVC sheet on the front face & 4mm thick prelam PVC sheet on back face, centre core will be PVC battern supplying & fixing in frame at site complete all as specified and directed by Engineer-in-Charge. |
| 42 | Material and labour for Powder Coated Aluminium Sections [Minimum 50 Micron thick] of approved colour as in Door, Window, Partitions with one or more rebates and Door, Window, Ventilator Shutters, Sliding or Openable Type, with or without Sash Bar, Aluminium section weighing not less than 0.55 KG / RM including necessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws, Powder Coated Aluminium Fittings such as Locking Arrangement [1 No], Suitable Handle [1 No], Stainless Steel Friction Hinges [1 No] per Window Shutter and 150mm Dia Handles on both sides, Tower bolts, 200 mm Long [2 Nos] etc. complete all as specified and as directed. Note:- [a] The size of aluminium sections shall be all as specified in relevant IS code and MES Schedule Part - I.[b] Supply only panel inserts of Glass / Particleboard / Gauze / Grills will be measured and paid separately.[c] Unit rate quoted shall be deemed to include for cost of Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws fittings such as Handles, Butt Hinges, Tower Bolts, Stainless Steel Friction Hinges and fixing only of Panel Inserts of Glass / Particleboard / Gauze / Grills / Aluminium Composite Panel etc. |
| 43 | Supply and fixing anodised Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 44 | Supply and fixing anodised Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified |
| 45 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified |
| 46 | Supply and fixing Mild steel work for framed work such as grills, (12mm sqm bars for window / ventilators for guard bars) grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 47 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 48 | Supply and fixing in repair Welded steel wire fabric(weight n.exc 4kg/sqm) complete to wood or steel members complete all as specified and directed |
| 49 | Material and Labour for preparing new or previously treated or untreated steel surface of any description, over 10cm in width or girth,not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified |
| 50 | Material and labour for 9mm thick Prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination ,fixed with aluminium frame work complete all as specified |
| 51 | Supply and fixing sheet glass 5.0 mm thick glass plain sheet ordinary quality in square n exc 0.5 sq. m in each pane to be fixed in aluminum frame complete all as specified and as directed. |
| 52 | Supply and fixing in repair 3mm Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 53 | Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 54 | Supply and fixing for stainless steel butt hinge ISI Marked 75mm size complete all as specified and as directed. |
| 55 | Supply and Fixing 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified in IS No 204-1991 and as directed . |
| 56 | Supply and Fixing 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified in IS No 281-1991 and as directed . |
| 57 | Supply and fixing 100mm Aluminium handles, cast type, anodised, fixed complete all as specified. |
| 58 | Supply and Fixing 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified in IS No 452-1973 and as directed . |
| 59 | Supply and Fixing for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed . |
| 60 | Supply and fixing of 18/19 mm thick Prelaminated particle board, interior grade,prelaminated both sides with decorative choice fixed with screws to timber frame-work, including Dismantling boarding, any description, fixed any position with nails complete all as specified and as directed. |
| 61 | Supply and fixing 30 mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised |
| 62 | Supply & fixing magnetic catches 100 mm brass body for use in cup boards of kitchen, ward robes etc. fixed as in repairs complete all as specified and directed. |
| 63 | Material and Labour for preparing new wood surfaces of any description, not otherwise descri-bed, over 10cm in width or girth, & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified |
| 64 | Material and labour in repairs for PVC tiles / sheets1.5 mm thick laminated plain coloured, marbled mosaic or motled finish, laid with approved rubber based adhesive in floors incl taking down old sheet all as specified. |
| 65 | Supply and fixing in repair110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified |
| 66 | Supply and fixing in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and incl necessary clamping complete all as specified |
| 67 | Supply and fixing in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed . |
| 68 | Supply and fixing in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified |
| 69 | Supply and fixing in repair 75mm bore PVC (SWR) bends any radius complete all as specified and as directed . |
| 70 | Supply and fixing in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 71 | Supply and fixing in repair 15mm bore CP fancy type brass bib taps cast copper alloy with capston headed handle screwed down, screwed for iron pipe or for brass ferrule and fixed (weight not less than 400gms). |
| 72 | Supply and fixing in repair 15mm bore angle cock CP fancy type with capston headed handle, screwed down, high pressure for iron pipes or for unions fixed in repairs (weight not less than 400gms). |
| 73 | Supply and fixing in repairs swan neck Pillar cock, CP 15mm bore cast copper alloy with chromium plated screwed both ends,fancy type, screwed down hidh pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed in repairs, complete all as specified. |
| 74 | Supply and fixing in repair of 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified and as directed . |
| 75 | Supply and fixing in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed . |
| 76 | Material and labour for rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed.including Disconnecting existing tanks of capacity exc. 250 & n. exc. 500 litre, and removing to store complete all as specified and directed. |
| 77 | Material and labour for rotational moulded polyethylene water storage tanks1000 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed.including Disconnecting existing tanks of capacity exc. 500 & n. exc. 1000 litre, and removing to store complete all as specified and directed. |
| 78 | Supply and fixing 15 mm bore ball brass valves high pressure with polythene float and flynut complete screwed or iron etc complete all as specified. |
| 79 | Taking up or down steel water tubing and connections of 15 mm bore fixed in any position complete all as specified. |
| 80 | Taking up or down steel water tubing and connections of 20 mm bore fixed in any position complete all as specified. |
| 81 | Material and labour for 15mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and directed . |
| 82 | Material and labour for 20mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and directed . |
| 83 | Supply and fixing as in repair Vitreous China pedestal wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand and incl 32mm bore CP coupling long shank , waste fitting complete all as specified and as directed . |
| 84 | Supply and fixing in repair of Mixer 15 mm dia Brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified. |
| 85 | Supply and fixing in repair of Mixer 15 mm dia Brass CP mixer for WHB/sink mixing hot & cold water screwed down for iron pipe and fixed complete all as specified. |
| 86 | Supply and fixing in repair of 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified. |
| 87 | Supply and fixing as in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white including fixing bolts, Plastic seat & cover complete all as specified and as directed . |
| 88 | Supply and fixing of Vitreous china squatting pan, \\"Orissa pattern\\" of size 680 x 470 mm white with integral foot rests(excluding flushing cistern, flush pipe and waste pipe), cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan,complete all as specified |
| 89 | Supply and fixing as in repair 10 litre PVC valveless, syphonic action type, dual flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed . |
| 90 | Supply and fixing in Repair for Premium grade PVC wall panelling thickness 5 to 8 mm and 12 inch width and 10-12 feet length fixed to wall including all necessary feamework,hardware and edge profiles and corner biddings complete all as specified and directed. |
| 91 | Supply and fixing Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawingincluding all necessary ,hardware and edge profiles and corner biddings complete all as specified and directed. including Dismantling wall and ceiling board any description, fixed any position. |
| 92 | Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. complete all as specified and directed. |
| 93 | Amount of credit of Rs. 227793.75 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender