Tender For Provision Of Certain B/R And Electrical And Mechanical Minor Works At Afs Begumpet Under Ge (Af) Hakimpet (Tender Id No. 2026_Mes_782816_1)
Tender Value
43 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
0 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Certain B/R And Electrical And Mechanical Minor Works At Afs Begumpet Under Ge (Af) Hakimpet (Tender Id No. 2026_Mes_782816_1)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Aug-2026 | Amendment to BOQ | Other | 26-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | NOTES :- In case description of any two or more items of the schedule ‘A’ is same and the tenderer quotes different rates for such items, only lowest rate of such items will be considered for acceptance and subsequently payment will be made upon execution of the items accordingly. |
| 2 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard or dense soil |
| 3 | Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5 m deep; in hard/dense ; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 sq.m on plan and n. exceeding 1.5m in depth and getting out hard/dense soil |
| 4 | M&L Plain Cement Concrete in foundations 1:4:8 type D2 using 40 mm graded aggregate in foundation filling and mass cconcrete all as directed. |
| 5 | M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering |
| 6 | Spreading and levelling in layers n exc. 25 cm thick well ramming including watering as required |
| 7 | M&L hardcore of broken stones or boulders of guage n exc. 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface. |
| 8 | M & L 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in sub base. |
| 9 | M & L for Pre-cast cement concrete block masonry with solid blocks, Type C1 1:3:6 (20mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:4, complete |
| 10 | M & L RCC mix ratio 1:1 1/2: 3 (20mm aggregate) nominal mix in foundation, including rafts, footings, plinth beams, bases for columns etc and mass concrete all as specified |
| 11 | M & L Form work to sides of Concrete foundation , footings, bases of columns, raft beams and soffits of foundation and plinth beam and similar work vertical or to batter etc with fair finished surfaces of concrete flat all as specified and directed |
| 12 | Providing, cement concrete type B1 1:2:4 (20 mm grdaed aggregate) in roof kerbs or mud stops, rounded or chamfered on edges , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, |
| 13 | Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 |
| 14 | M&L Damp proof course in cement concrete 1:2:4 type B 0 25 mm thick to horizontal or vertical surfaces including necessary formwork |
| 15 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 , finished even and smooth without using extra cement |
| 16 | M&L for 15 mm thick plastering on fair faces of brick work or concrete surfaces in two layer with 10 mm thick in CM 1:6 and top 5 mm thick in CM 1:4, mixing water proofing compound at 3% by weight of cement (but excluding the cost of WPC) finished the surfaces even and smooth without using extra cement. |
| 17 | M&L for preparing new plastered surface of wall and applying 2mm thick putty finish to obtain smooth finish wall surface and applying two coat of distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 18 | M&L for preparing new plastered surface of wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by the Engineer-in-charge and as per manufacturers instructions |
| 19 | M&L for complete removal of existing treatment of wall and applying 2mm thick putty finish to obtain smooth finish wall surface and applying two coats of distemper over a coat of primer complete all as specified and as directed. |
| 20 | Supply only integral water proofing compound as per manufactures instruction. |
| 21 | M& L providing Cement Concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in copings and similar work all as specified and as directed. |
| 22 | M&L, pre cast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs including necessary form work, placed in position, set in cement mortar (1:4) Note: Reinforcement shall be measured and paid separately. |
| 23 | M & L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Mirror polishing and edge rounded all as per specified for steps and including 20 mm thick screed bed in CM 1:6. |
| 24 | M & L for TMT bars for reinforcement 10mm dia and over cut to lengths, bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9mm dia |
| 25 | M&L, TMT bars 8mm dia, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 26 | Taking down chowkats with shutter ( without taking off shutters from the frame) n.exc 1.5 Sqm each incl steel windows and ventilators. |
| 27 | Demolition of brick works/stone masonry work built in cement mortar including all quions, arches, pillars etc. |
| 28 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete with CM 1:6 |
| 29 | S & F in repairs Factory made single extruded WPC(Wood Polymenr Composite) solid door/window/Ceosetory windows and other Frames/chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated witgh miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame densityy of 750 kg/cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), miimum compressive strength of 58 N/mm2, modules of elasticity 900N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of requred dia and length complete as per direction of Engineer-in-charge. (M.S hold fast/lugs or SS dash fasteners shall bne paid for separately) manufacturers instructions and as directed by Engineer-in-Charge. |
| 30 | S & F in repairs Factory made single extruded WPC(Wood Polymenr Composite) solid door/window/Ceosetory windows and other Frames/chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated witgh miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame densityy of 750 kg/cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), miimum compressive strength of 58 N/mm2, modules of elasticity 900N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of requred dia and length complete as per direction of Engineer-in-charge. (M.S hold fast/lugs or SS dash fasteners shall bne paid for separately) manufacturers instructions and as directed by Engineer-in-Charge. |
| 31 | S&F in repairsFactory Made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powedr/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face ) and 900 N (Edge), minimum compressive strength 50 N.mm2, modulus of elasticity 850 N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. |
| 32 | All as per item No. 30 above but 35 mm thick |
| 33 | S&F 100 mm long MS butt hinges, medium weight cold rolled. |
| 34 | S&F 200mm long aluminium anodized barrel tower bolts of extruded section all as specified and directed. |
| 35 | S&F 150 mm long extruided aluminium alloy handles fabricated type anodised, |
| 36 | S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type ) and fixing clips of cast or extruded section and fixing bolts and sliding blots of extruded sections or cast aluminium alloy. |
| 37 | S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 38 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm),sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each |
| 39 | S&F Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. |
| 40 | S&F frosted Sheet glass, ordinary quality 4.8 mm thick and glazing with rubber to UPVC frame in square/rectangle n exc 0.5 sq. m in each pane all as specified and as directed |
| 41 | S&F Sheet glass, ordinary quality 4.8mm thick and glazing with rubber to UPVC frame in square/rectangle exc 0.5 sq. m in each pane all as specified and as directed |
| 42 | S&F steel work in Tubular Roof trusses,trussed, purlins, rafters including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S 1161 1979 grade st 240 |
| 43 | S&F Pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 44 | S & F False Ceiling Frame Work using poweder coated Aluminium snap grid of size 605 x 605 mm size of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 605 x 605mm suspended with 4mm dia GI wire(up to 1200 mm length) at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc fixed in ceiling with clips to aluminium snap grid for fixing 12mm thick Gyprock false ceiling boards . ( ceiling board measured and paid seperately) all as specified and as directed |
| 45 | S &F 12 mm thick gyprock false ceiling boards decorative type of suitable size to fixed in poweder coated aluminium /GI /wooden framework etc in ceiling with necessary screws all as specified including two coats of OBD over a coat of primer on ceiling surfaces |
| 46 | M & L for Plain Cement concrete type C-1 1:3:6 using 20mm graded crushed stone aggregates 75mm thick as in plinth protection, hard standing, sub base, floor finish complete all as specified and directed. |
| 47 | M & L for Plain Cement concrete type B-0,1:2:4(12.50 mm graded aggregate) 25mm thick complete all as specified and directed. |
| 48 | M&L Non - skid Ceramic tiles 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match . including 15 mmm thick screed bed or bedding layer in CM 1:6 as in base to floor finish set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free. |
| 49 | M&L Coloured joint free Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free 15 mmm thick screed bed or bedding layer in CM 1:6 as in base to floor finish. |
| 50 | -Ditto- all as per item above here-in-before but as in vertical surface such as skirting etc. to match with the flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free 15 mmm thick screed bed or bedding layer in CM 1:6 as in base to floor finish. |
| 51 | M&L for coloured Glazed ceramic tiles in vertical surface 300 x 450mm x 7mm thick, including 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as in base for wall tiling in shirting/dado all as specified. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 52 | Cutting chases, in stone walls, pinning in, making good to facing where required and pointing in cement mortpor 1:3 for concealed water tubing and making good, cuting exc, 10 cm but n.exc 20 cm girth. |
| 53 | S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including brass el;bow,brass tee,adaptor etc including Taking up or down steel tubing and connections or removing to store 15 mm boreall as directed engineer in charge |
| 54 | S&F 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete including brass el;bow,brass tee,adaptor etc all as specified including Taking up or down steel tubing and connections removing to store 20 mm bore all as directed engineer in charge |
| 55 | S&F PVC in repairs (SWR) floor trap diameter of out let 75 mm ,plain with grating including jointing with solvent cement fixed in cement concrete all as specified and directed ,(cement concrete shall be measured and paid seperately. |
| 56 | S&F 150 X150 mm Salt-glazed stone ware gully traps, square, type 'P' |
| 57 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed. |
| 58 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed. |
| 59 | S&F PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm |
| 60 | S&F PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm |
| 61 | S&F 110 mm bore PVC (SWR) bends any radiuis all as specified and as directed |
| 62 | S&F 110 mm bore PVC (SWR) bends with access door any radiuis all as specified and as directed |
| 63 | S&F 75 mm bore PVC (SWR) bends any radiuis all as specified and as directed |
| 64 | S&F 75 mm bore PVC (SWR) bends with access door any radiuis all as specified and as directed |
| 65 | S&F 110 mm bore PVC (SWR) junction single, (single T) all as specified and as directed |
| 66 | S&F 110 mm bore PVC (SWR) junction single, (single T) with access door all as specified and as directed |
| 67 | S&F 75 mm bore PVC (SWR) junction single, (single T) all as specified and as directed |
| 68 | S&F 75 mm bore PVC (SWR) junction single, (single T) with access door all as specified and as directed |
| 69 | S&F in repairs, stainless steel kitchen sink with drainage board, 1mm thick with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 70 | S/F in repairs glass corner shelf of size 9\\" dia with chromium plated rail etc complete all as specifed Cat No: ACN 1173 of Jaguar or equivalent |
| 71 | S&F in repairs, bevelled edge mirror, 600mm x 450mm, of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 72 | S&F , mild steel chromium plated towel rail, 'D' shaped, 20mm dia, 600mm long, premium quality complete all as directed. |
| 73 | S&F in 32mm dia brass chromium plated waste coupling fittings for wash hand basin etc., with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 74 | S&F in 100 mm dia brass chromium plated waste coupling fittings for stainless steel kitchen sink etc., with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 75 | S&F in repairs first quality vitreous China wash down water closet pan (pedestal pattern), white, of size not less than 400mm x 400mm x 340mm (excluding fixing bolts, flushing cistern and flush pipe) but including provision of plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed. |
| 76 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 77 | S&F in repairs Flushing cistern,PVC valveless, syphonic action type 10 litre capacity,low level, white, with inlet,ball valve, float and handle and brackets and 32mm dia PVC flush pipe complete all as specified. |
| 78 | S&F in repairs, 15mm bore bib taps, long body, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/GI pipe or for brass ferrule complete all as specified and directed. |
| 79 | S&F in repairs, 15mm bore two way bib taps, long body, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/GI pipe or for brass ferrule complete all as specified and directed. |
| 80 | S&F in repairs, 15mm bore Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron/GI pipe and fixed complete all as specified and directed. |
| 81 | S&F in repairs, 15mm bore Stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed. |
| 82 | S&F in repairs, 125mm size chromium plated shower rose with or without swivel joint complete all as specified and directed. |
| 83 | S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed. |
| 84 | M&L for 25 mm thick Medium density fibre board exterior grade complete all as specified and as directed by Enginner-in-Charge. |
| 85 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 86 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A. |
| 87 | M&L, preparing new or previously untreated steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed. |
| 88 | Excavation in post holes or similar holes n.exc 0.50 cum and getting out/returning, filling in and ramming removing surplus soil to a distance n.exc 50 m in soft/loose soil complete all as specified and as directed. |
| 89 | M & L PCC (1:2:4) type B2 using 40 mm graded aggregate as in foundation and mass concrete complete all as specified and as directed. |
| 90 | S&F tubes 275mm Medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old tubing |
| 91 | S&F in repairs, vitreous china wash hand basin white 550x400mm of size including cutting for and pinning in ends of brackets or erecting stand including brackets, PVC waste pipe and coupling of suitable size including removal of debries off the premises complete all as directed |
| 92 | S&F in repairs, 500litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including connecting up of existing inlet and outlet pipes and ball valve complete including dismantling of old tank all as specified and as directed. |
| 93 | Demolition of Roofs, floors (other than groundfloors), beams, staircases, landing, chajjas and similar suspended work |
| 94 | Taking down cement or cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. |
| 95 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth (without using extra cement) complete all as specified. |
| 96 | M&L joint free coloured , designer wall tiles 7 to 8mm thick in wall cladding, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed. |
| 97 | M&L, 12 to 18mm thick machine cut coloured granite, factory polished, in skirting/dado/wall lining, (veneering to wall) over and incl 10mm thick backing coat in cement mortar 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete incl moulding all as specified and as directed |
| 98 | M&L for Preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed. |
| 99 | M & L 100 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base / sub floor complete all as specified and directed. |
| 100 | M&L Colour Chequired cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey pigment cement and pigments set jionted and pointed in neat cement slurry colour to match in floors . |
| 101 | M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying of floor finish complete all as specified. |
| 102 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 103 | Returning, filling in, hard /dense soil including spreading, levelling, watering and well ramming in layers not exc 25 cm |
| 104 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point. |
| 105 | Material and labour PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in copings all as specified and directed. |
| 106 | M&L Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) usingmarble dust with admixture of pigment to match with shade of granite including 15 mm thick backing coat in CM 1:6Note: Sample /colour of granite approved by GE |
| 107 | M&L non skid high density light coloured / dark shade endura parking tiles 11-12mm thick of area of tiles exc 0.11 sqm but not exceding 0.18 sqm area for each tiles in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match including screed bed of 15mm thick in CM 1:6 complete all as specified and as directed . |
| 108 | Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc |
| 109 | M&L for DIGITAL wall tiles in vertical surfaces of any size of min thickness 7mm thick, including 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as in base for wall tiling in shirting/dado all as specified. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 110 | S&F back lit LED type 3 D customised golden Stainless steel grade 304 letters of size 12 inch with customised thickness (25 to 50 mm) of glossy with back lighting of warm white of back side acrylic and built in LED lighting water proof LED Module for radiant glow installed on vertical granite surfcaes with threaded metal studs secured with weather resistant epoxy with vinay or acrylic backing on LED letters. |
| 111 | S&F back lit LED type 3 D customised golden Stainless steel grade 304 shapes/Symbols like diamond,circle shape of size 3 inch with customised thickness (25 to 50 mm) of glossy with back lighting of warm white of back side acrylic and built in LED lighting water proof LED Module for radiant glow installed on vertical granite surfcaes with threaded metal studs secured with weather resistant epoxy with vinay or acrylic backing on LED letters. |
| 112 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises all as specified and directed. |
| 113 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. |
| 114 | M&L 25mm thick Plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) laid in flooring as specified and directed by Engineer In charge. |
| 115 | Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 116 | All as per item No. above 114 but in skirting/dado in CM 1:3 , 10mm thick. |
| 117 | M&L for preparing new plaster surface of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer including 1 mm thick putty , complete all as specified and directed. |
| 118 | M&L Preparation of old painted wooden surface of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all specified and directed |
| 119 | Removing building materials etc.to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination. |
| 120 | M&L for complete removal of existing treatment on wall and preparing the surfaces and applying two coats of oil bound distemper over a coat of Alkali resistant Primer on 1 mm thick wall care putty, complete all as specified and directed. |
| 121 | S&F e 410-W (GdeE- 250) quality-A Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. as a lintel (cut to ordinary lengths i.e. within 20mm of the length indicated). |
| 122 | Cement Concrete Type B1 1:2:4 (20 mm graded aggregate) Beams, cantilevers, bressumm ers, lintels over 1.5m span |
| 123 | M & L for point wiring with 1.5 sqmm FR grade PVC insulated and unsheathed stranded copper conductor cable,1100 volts grade as per IS-694 drawn through and including PVC casing and capping/ Conduit pipe (not less than 20 mm ) complete with all fittings and acessories including PVC Board for mounting of switches, sockets, regulators, etc and 1.5 sq mm stranded copper conductor cable FR grade PVC insulated and unsheathed for earth continuity all as specified and directed for One light Point controlled by one one way switch. |
| 124 | All as per Ser item No 122 above but for One Ceiling /Exhaust Fan Point controlled by one one way switch. |
| 125 | All as per Ser item No 122 above but for 5 amps socket point on independent board. |
| 126 | All as per Ser item No 122 above but with 2.5 sqmm cable for 15 amps socket outlet on independent board with 2.5 Sqmm earth continuty wire complete all as specified and directed. |
| 127 | Supply and fix ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body. |
| 128 | Supply and fix in repair switch modular type, 6 Amps 240 volts single pole one way. |
| 129 | Supply and fix in repair socket outlet, 5 pin 6 Amps, Modular type. |
| 130 | Supply and fix in repair socket outlet 6/16 Amps, 6 in 1, Modular type. |
| 131 | Supply and fix switch piano modular type,15/16 Amps 240 volts single pole one way. |
| 132 | Supply and fix in repair 20 watt intregated LED tube light fitting 4 ft , suitable for single phase 230 Volts, 50 Hz AC supply and mounted on wall or ceiling, complete with all accessories internally prewired and including electrically connection with copper conductor cable of size 0.5 Sqmm (nominal area)all as specified. |
| 133 | S& F in repair Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed |
| 134 | S& F Rechargeable12 watt LED Bulb B 22 type , CDL/WW with backup complete all as specified and directed |
| 135 | M&L for MCB single pole, 240 volts, 6-32 Amps, 10 KA C Curve |
| 136 | M&L for sub main wiring comprising single core , 2 Runs of 6 sqmm nominal cross sectional area,FRLS multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in PVC casing capping/conduit and its fittings complete surface/concealed including provision of 1X6 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire complete all as specified. Note: 2 runs of 6.0 sqmm cable conductor, one run of 6.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length. |
| 137 | Supply and fix in repair SP&N DBs, double door, 240 volt, 8 way complete all as specified and directed. Make:- Legrand |
| 138 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified |
| 139 | XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 Core |
| 140 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting in hard/dense soil for laying of cables/ for erection of poles/ for stay assembly etc complete all as specified and directed by Engineer-in-Charge. |
| 141 | Supply and spread clean dry river sand in trenches for cushioning of cable complete all as specified and directed by Engineer-in-Charge. (Note: Punned down thickness only shall be measured for the purpose of payment) |
| 142 | Supply and lay common burnt clay building bricks sub class 'B' of designation 75 laid in trenches as protection to cables complete all as specified and as directed. |
| 143 | Supply and fix in repair SP&N DBs, double door, 240 volt, 8 way complete all as specified and directed. Make:- Legrand |
| 144 | M&L in repair for MCB single pole & neutral 240 volts 32Amps C curve. |
| 145 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete. |
| 146 | Supply and fix in repair SP&N DBs, double door, 240 volt, 2 way complete all as specified and directed. |
| 147 | M&L in repair for MCB single pole & neutral 240 volts 10Amps C curve. |
| 148 | Wiring for circuit/submain wiring alongwith earth wire with the sizes 2x1.5 sq. mm +1x1.0 sq. mm earth wire of FR is PVC insulated copper conductor, single core cable in surface/ recessed as required drawn through PVC conduit complete all as specified and directed.Note: Two runs of 1.5 sqmm cable conductor, one run of 1.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length. |
| 149 | M & L Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of size 25mm . fixed in wall complete all as specified and directed. |
| 150 | Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection fixing arangement on wall/pole, with impact and corrosion resistant complete with driver and lamp all as specified and as directed. |
| 151 | S&F Cable Junction Box made out of thermoplastic sheet having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals including one 6 Amps single pole MCB ,03 Nos polymide gland with check nut (M-32 - 2 nos) fixed on poles with flat iron clamps of size 25x3mm, nuts, bolts, washers etc. complete all as specified and as directed.Make : Hensel KM 9105 or equivalent model in sintex/SPELSBERG/RITTAL |
| 152 | Supply and fix 3 core PVC copper cable 2.5 sqmm drawn through medium grade conduit pipe fixing on wall / pole/ground from junction box to flood light complete all as specified and directed. |
| 153 | Supply and fixing Decorative LED wall light of 12 watt prewired with lamp and suitable for fixing on wall complete all as specified and directed. |
| 154 | S&F Octagonal shaped GI hot dipped (65 microns) internally and externally as per IS - 2629 minimum 3mm thick electric pole, Polished finished (7 metre long) Double arm bracket(1.5 Mtrs) complete with PCC base (0.6x0.6*0.6)Mtr, bolts, nuts, washers and base plates all as specified including the following:-Make Calcutta Poles & Tubes CPT 7030 or equivallent in PS(a) Excavation in post hole not exceeding for pole foundation & getting out in soft loose soil, returning, filling in the excavated soil after fixing the pole in foundation, ramming earth around in layers n.exc 25 cm thick and disposal of surplus soil to a distance n.exc 50 metres.(b) M&L for Providing PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) in foundation as per manufacturers design upto GL including Nuts, bolts, washers and base plates of suitable size and length for grouting in as per manufacturer's design.(d) Inbuilt internal junction box consists of 4 terminals for cable and outgoing of MCB SP 6 Amps 10 KA -2 Nos and internal wiring from juncrion box to street light with 1.5 sqmm three core copper wire separate for both complete. |
| 155 | Material and labour for 40mm dia bore tubes, 'light grade' galvanised, with all fitting and fixed complete to walls/ poles or laid in trenches/ floors for cable protection complete all as specified and directed by Engineer-in-Charge. |
| 156 | M & L for Road cutting / hard standing for taking up or laying of LT UG cable upto a depth of 15 cm, after laying of cable, well ramming to the excavated soil and repair the exvcavated portion of road as existing or by providing suitable mixture of PCC all as specified and as directed. |
| 157 | Taking down the old unsv and Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 10 sqmm 2 core complete all as specified and directed |
| 158 | Supply and fix in repair LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 159 | Supply and fix in repair LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 26, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender