Tender For Provision Of Ug Sump At Uri Under Ge 969 Ews
Tender Value
43.19 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
13 days left
EMD
86380
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Ug Sump At Uri Under Ge 969 Ews
BOQ
| Sl. No. | Item Description |
| 1 | M&L for PCC 1:4:8 type D-2 using (40 mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed. |
| 2 | M&L for loose filling with broken stone or boulder aggregate of gauge 80-150 mm as in filter bed, complete all as specified and as directed. |
| 3 | M&L for Sand filling under floors or in foundations including watering and consolidations, complete all as specified and as directed. |
| 4 | S & F 10000 Litre heavy duty/ Industrial type FRP(Fiber Reinforced Plastic) undergound water tank with min thickness 6-8 mm including in let nozzle ,Air vent and overflow pipe outlet connection, complete all as specified and as directed. |
| 5 | M&L for 100 mm thick PCC 1:2:4 type B 2 (40mm graded stone aggregate) as in sub base, complete all as specified and as directed. |
| 6 | M&L for Precast RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in cover slab and similar work includind necessary formwork set in cm (1:4), complete all as specified and as directed. |
| 7 | Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 8 | M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n exc 200 mm thick (Horizontal or sloping), complete all as specified and as directed. |
| 9 | Cutting of cast iron pipes of upto 80 mm dia and reducing to required lenght for insertion of tee, bends elbow etc, complete all as specified and as directed. |
| 10 | Fitting of Bends (any type, radius and angle) tapers any type, (straight, bends, increasing, decreasing or double socket etc) Tee pieces single branch, \\"Y\\" junction, double branch cross, complete all as specified and as directed. |
| 11 | S & F GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors and including taking down existing GI/CI pipe for the following sizes , complete all as specified and as directed. |
| 12 | (a) 20 mm bore size |
| 13 | (b) 25 mm bore size |
| 14 | Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in deep in hard/dense soil/ road for getting out old GI tubing from the trenches etc, complete all as specified and as directed. |
| 15 | All as per item No 14 above but but depth exc 1.5 m but not exc 3 m, complete all as specified and as directed. |
| 16 | Removing excavated material of any type of soil/soft rock from site to a distance not exceeding 50mtr away and depositing where directed not exceeding 1.5mtr above the starting point, complete all as specified and as directed. |
| 17 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil, complete all as specified and as directed. |
| 18 | S&F 20 mm dia, Unions, brass to connect and fixed, complete all as specified and as directed. |
| 19 | S&F 25 mm dia, Unions, brass to connect and fixed, complete all as specified and as directed. |
| 20 | Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. \\"Y\\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150 mm dia, complete all as specified and as directed. |
| 21 | S&F Gun metal gate valve 20 mm bore with iron hand wheel head ,screwed both ends for iron pipes and fixed complete including dismantling old and unsv, complete all as specified and as directed. |
| 22 | S&F Gun metal gate valve 25 mm bore with iron hand wheel head ,screwed both ends for iron pipes and fixed complete including dismantling old and unsv, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender