Tender For Special Repair, Revenue And Minor Works Under Age B&R-Ii And Age E&M-Iv Of Ge(S) Bathinda At Bathinda Mil Stn (Job No. Sr(B)-10 Of 26-27, Rev-19 Of 26-27, Rev-19 Of 26-27 And Minor-09 Of 26-27)
Tender Value
47.54 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
19 days left
EMD
95080
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair, Revenue And Minor Works Under Age B&R-Ii And Age E&M-Iv Of Ge(S) Bathinda At Bathinda Mil Stn (Job No. Sr(B)-10 Of 26-27, Rev-19 Of 26-27, Rev-19 Of 26-27 And Minor-09 Of 26-27)
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed. |
| 2 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 45mmx70 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modules of elasticity 900 N/Sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moisture proof and fire retardant and fixed in position With MS hold Fast /SS Dash Fastner incl S&F (03 Nos Per Frame ) 100 mm long SS Butt Hinges complete all as specified and directed. |
| 3 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and natural fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resistance to spread of flame of class A cat with property of being termite / borer proof , water moisture proof and fire retardant and fixing and incl S&F of 02 Nos (per Leaf) SS 150mm long Tower Bolt and S&F of 02 Nos (per Leaf) SS 150mm long handle complete all as specified and directed. |
| 4 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed. |
| 5 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 65mmx125 mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and natural fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modules of elasticity 900 N/Sqmm and resistace to spread of flame of class A cat with property of being termite / borer proof , water moisture proof and fire retardant and fixed in position With MS hold Fast /SS Dash Fastner incl S&F (03 Nos Per Frame ) 100 mm long SS Butt Hinges complete all as specified and directed. |
| 6 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and natural fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resistance to spread of flame of class A cat with property of being termite / borer proof , water moisture proof and fire retardant and fixing and incl S&F of 02 Nos (per Leaf) SS 150mm long Tower Bolt and S&F of 02 Nos (per Leaf) SS 150mm long handle and S&F of 01 No (per Leaf) SS 300mm long sliding door bolt complete all as specified and directed. |
| 7 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) glazed and skeleton shutters of 35mm size open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and natural fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resistance to spread of flame of class A cat with property of being termite / borer proof , water moisture proof and fire retardant and fixing and incl S&F of 02 Nos (per Leaf) SS 150mm long Tower Bolt and S&F of 02 Nos (per Leaf) SS 150mm long handle complete all as specified and directed. |
| 8 | M&L Providing and fixing factory made uPVC white colour casement (Openable) window /ventilator made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), Butt Hinges of 'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass complete all as specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and Wire mesh and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 9 | M&L Providing and fixing factory made uPVC white colour Sliding window three track made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm) sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 +– 0.2mm thick, galvanized steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: Touch lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories and 5mm thick glazing with selected quality glass complete all as specified and directed.Note: The unit rate quoted by contractor excludes cost of glass and Wire mesh and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 10 | S&F stainless steel wire cloth 0.56 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed. |
| 11 | S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 12 | M & L sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and directed. |
| 13 | All as per item above but 4 mm thick pin head type, figured glass complete all as specified and directed. |
| 14 | S&F framed brackets of angles cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary, each backets confirming to Fe - 290, Gde - E - 165 as door frame, sink, hand wash basin, ladders and cooler stand etc complete all as specified and directed. |
| 15 | Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick complete all as specified and directed. |
| 16 | Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 17 | Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 18 | M&L for 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course where as required complete all as specified and directed . |
| 19 | M&L for Vitrified coloured ceramic tiles, light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed. |
| 20 | All as per item No. 19 above but as in skirting including 10mm thick backing coat in CM 1:4 complete all as specified and directed . |
| 21 | M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry /paste and pointed in white or coloured cement to match including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed. |
| 23 | M&L for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mm x 300mm x 7mm / 600mm x 300mm x 7mm thick set jointed in neat cement slurry / paste and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 24 | M&L 20mm thick Granite machine cut (table rubbed and polished) in steps, skirting / dado, riser, coocking plateform etc laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 25 | M&L for 100 mm thick PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in flooring complete all as specified and directed. |
| 26 | S&F 15mm bore ISI chromium plated quarter turn Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified and directed. |
| 27 | S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed. |
| 28 | S & F 15 mm bore chromium plated fancy type stop valve of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 29 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 30 | S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed. |
| 31 | S&F in repair 15 mm dia ISI Mark bore chromium plated bib taps cast copper alloy, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. |
| 32 | S&F 125mm dia grating with/without waste hole of PTMT including circular cutting on tiles etc. complete all as specified and as directed. |
| 33 | S&F (600mm x 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 34 | Supply and fixing stainless steel curtain rod 25mm dia, wall thickness of pipe not less than 16 guage and grade SS 304, including brackets and pair of decorated end knobs (finials), stop roller etc. as per site requirement, fixed to wall with fixing accessories, including taking down old existing curtain rods any type or condition complete all as specified and as directed. |
| 35 | S&F 25 mm CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on walls & ceilings or laid in floors including taking up or down GI tubing 25 mm bore complete all as specified and directed. |
| 36 | S&F 20 mm CPVC pipe SDR 11 and Plain CPVC SDR 11 fittings with all fitting and fixed to walls & ceilings or laid in floors including taking up or down GI tubing 20mm bore complete all as specified and directed. |
| 37 | Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc |
| 38 | S&F 110 mm bore of pipe PVC (SWR) type B pipes single socket 6 Kg/Sq cm in any length with rubber ring joint fixed to walls with stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolt and nuts and securing ends of stays to walls at a distance of 100-120mm away from walls complete all as specified and as directed. |
| 39 | S&F 110 mm bore of pipe PVC (SWR) type B bends of any radius / shoe, tee, elbow, Y joints, floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 using 20mm stone aggregate fixed to PVC pipes complete all as specified and as directed. |
| 40 | S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding supply of flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor.(Supply only items are measured separately) complete all as specified and as directed. |
| 41 | S&F in repair PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and as directed. |
| 42 | S&F in repair Wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed. |
| 43 | S&F in repairs Vitreous China Urinals, half stall type white including 40mm waste coupling including making connection and fixed in position complete all as specified and as directed. |
| 44 | S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms)complete all as specified and as directed. |
| 45 | Demolition and breaking up drain 150 mm internal dia of Salt glazed ware pipe set in cement mortar complete all as specified and as directed. |
| 46 | Excavation in trenches n.exc 1.5m wide & n.exc 1.5m deep for foundation, etc. or for shafts, wells, cesspits, manholes, etc. not exc 10 Sqm on plan and not exc 1.5 m depth & getting cut in soft/loose soil complete all as specified and as directed. |
| 47 | Returning filling in including spreading, levelling, watering & well ramming in layers not exceeding 25cm thick complete all as specified and as directed. |
| 48 | Removal of excavated soil to a distance n.exc 50m & deposited where directed at level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 49 | M & L for 150mm dia (internal) DWCPE pipes laid in trenches & jointed complete all as specified. |
| 50 | M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in drain bed to drain pipe including packing under & haunching against the sides of pipe 150 mm dia ( internal) after these are laid in trenches complete all as specified. |
| 51 | Cutting in to existing manhaoles for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 150mm. |
| 52 | Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories |
| 53 | Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories |
| 54 | S&F 110mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to walls and fixing with clamps complete all as specified. |
| 55 | S&F 75 mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to walls and fixing with clamps complete all as specified. |
| 56 | S&F 110 bore, PVC (SWR) bends Juction , Tee and Y (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed. |
| 57 | S&F 75 bore,PVC (SWR), bends , junction , Tee and Y (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed. |
| 58 | S&F 100mm dia of long neck PVC (SWR) P' trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed. |
| 59 | S&F 75mm dia of long neck PVC (SWR) floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed. |
| 60 | S&F Branch pieces, PVC (SWR) single 110 mm bore, equal or unqual, as in repairs complete all as specified and directed. |
| 61 | S&F Branch pieces, PVC (SWR) single 75 mm bore, equal or unqual, ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed. |
| 62 | Demolition of RCC of any descrition such as Kitchen chimniy, shelves, OHT Tanks. etc and in any position not other wise specifically provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition). |
| 63 | Providing, precast cement concrete type B1 1:2:4 (20 mm graged aggregate) as in manholes covers etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified |
| 64 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 65 | Use and waste formwork to sides and soffits of floor or roof beam, beam haunching, girders, bressummers, lintels, cantilevers, shelves etc finished rough surfaces of concrete complete all as specified. |
| 66 | M&L Reinforced cement concrete (nominal mix) ,1:2:4, type B-1 using 20mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. |
| 67 | Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed , complete all as specified and directed by Engineer-in-charge. |
| 68 | Dismantling of Mud in roof any thickness including plastering and leeping (where full thickness removed or only a part there of) complete all as specified. |
| 69 | Removal of excavated soil/ debrices received from dismantling of mud in roof to a distance exc 250 M but n. exc 500 M & deposited where directed at level not exceeding 1.5m above the starting point. |
| 70 | M&L for repair of surface with GP-2 (General Purpose Grout) for levelling of surface in required slope as per site condition/ manufacturers instruction and including cracks shall be repaired with cement admixed with polymer as per manufacturers instructions complete all as specified and as directed. |
| 71 | M&L for cleaning the surface of loose dust, and dirt and cement slurry etc by means of wire brush, dust removing brush etc. after preparation of surface treated with PU epoxy primer to seal the pores and enhance the adhesive of the coating, after primer applying single component waterproofing liquid membrane based on pure, polyurethane resin cold applied with spray, applied PU Membrane shall be UV resistant with SRI (Sun Reflective Index) of 98 with an elongation of 650% +50 and tensile strength not less than 2Mpa. No leakage up to five bars of water pressure. Shore hardness >70 shall be 2.00mm (overall) DFT (Dry Film Thickness) , in two or more layers (each layer minium 750 micron) or as per manufacturers instructions so as to achieve thickness not less than 2.00mm DFT complete all as specified and as directed. Note :- (i) Payment will be made after providing warranty certificate for 10 years from the Company. (ii) The thickness of the PU membrane shall be checked with cut and seal method and the third-party test to be carried out from NABL approved Lab. The sample size for check should be 50x50mm randomly at any location and kept in record. |
| 72 | M&L for 40 mm average thick PCC padding in 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof slab finishing the surface even and fair using liquid water proofing compound complete all as specified and directed. Liquid water proofing compound shall be measured and paid separatly as supply only under appropriate item of schedule 'A' BoQ. |
| 73 | M&L for cement slurry @ 1.2 kg/sqm spreading with bristle brush and rendering 15mm (average thickness) in cement mortar 1:3 finished even and fair mixing with Liquid water proofing compound 200 ML per 50 kg cement bag on roof surface complete all as specified and directed. Liquid water proofing compound shall be measured and paid separatly as supply only under appropriate item of schedule 'A' BoQ. |
| 74 | Supply only Liquid water proofing compound complete as per manufacturers instructions and directed by Engineer-in-charge. |
| 75 | M&L for providing PCC Coving/ gola along vertical parapets of size 75mm x 75mm with cement concrete, 1:2:4 type B1 (using 20mm crushed stone aggregate) including supply and mixing liquid WPC in mortar @ as per manufacturere instruction per bag of cement of 50 Kg complete all as specified and as directed. |
| 76 | Taking down old cement plaster including raking out joints hacking for key scrubbing down with water etc and removing rubbish from the premises to a distance exceeding 1 km but not exceeding 2 km etc complete all as specified. |
| 77 | M&L for rendering 15mm thick in cement mortar 1:6 on internal wall surfaces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified. |
| 78 | M&L for rendering 15mm thick in cement mortar in 1:4 on external wall surfaces of brick work or concrete surfaces even and fair without using extra cement complete all as specified. |
| 79 | Rendering 10 mm thick in cement mortar 1:3 on ceiling all specified and directed. |
| 80 | Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified. |
| 81 | M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified. |
| 82 | M&L for brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius in half brick thick wall built in CM (1:4) complete all as specified and directed. |
| 83 | PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick as in plinth protection complete all as specified and directed. |
| 84 | S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and including dismantling of old existing water tanks of exc 250 and n.exc 500 ltrs capacity remove to store all as per specified and directed. |
| 85 | S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete. |
| 86 | S&F 20 mm gun metal gate valves with iron wheel head complete all as specified. |
| 87 | S&F 25mm gun metal gate valves with iron wheel head complete all as specified. |
| 88 | M&L for preparation of new plastered Internal wall surface and applying putty 1mm thickness over plastered surface to prepare the surface even and smooth including two coats of distempering with ist quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ltr, of approved manufacturer of required shade and colour complete as per manufacturer specification. |
| 89 | M&L for complete removal of existing treatment on old plastered wall surface and applying putty 1mm thickness over plastered surface to prepare the surface even and smooth including two coats of distempering with ist quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ltr, of approved manufacturer of required shade and colour complete as per manufacturer specification. |
| 90 | M&L for preparing newly plastered surfaces of walls and applying three coats of White washing on Walls complete all as specified. |
| 91 | M&L for preparing newly plastered or unplastered surface of ceiling and applying three coats of white wash complete all as specified. |
| 92 | M&L for preparing old plastered or unplastered surface of ceiling and applying two coats of white wash on ceiling complete all as specified. |
| 93 | M&L for preparation of new plastered wall surface and finishing wall with two coats of Acrylic smooth exterior paint of required shade : (applied @ 1.67 ltr / sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm complete all as specified and as directed. |
| 94 | M&L for complete removal of existing treatment on old plastered wall surface and finishing wall with two coats of Acrylic smooth exterior paint of required shade : (applied @ 1.67 ltr / sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm complete all as specified and as directed. |
| 95 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint (for steel surfaces) complete all as specified. |
| 96 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed. |
| 97 | M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base floor, complete all as specified and directed. |
| 98 | M&L for 25mm thick sand cusioning layer under interlocking paver block complete all as specified and as directed. |
| 99 | M&L for Machine pressed precast conctete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified |
| 100 | Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed. |
| 101 | S&F steel rolling shutters 1.25mm thick lathing, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, gear operated type with bevel gear box and crank handle, erected in position as indicated complete and including taking down of old rolling shutters all as specified and as directed. |
| 102 | Cleaning all existing reinforcement bars in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items with wire brush/rotary wire brush to make entire circumference surface of bars free from rust scales, loose material, dirt etc., complete and applying alkaline rust converting primer on the existing rebar and allowing it to react with rust for 6 hrs and form a corrosion resistant, insoluble and adherent protective layer including cleaning the reinforcement, wire brushing to remove the rust spalls, complete as per manufacturer’s instructions, complete all as specified and as directed by Engineer-in-charge.Note :- Mode of measurement : per sqm of breaking area of concrete only. |
| 103 | Providing and application of Zinc rich epoxy anti-corrosive protective coating for reinforcement bars as corrosion protection system in 2 coats to the entire circumference surface of bars (consumption Qty as per manufacturer's instructions but min 0.4 kg/Sqm approx) in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and directed by Engr-in-charge. The product should confirm carbonation resistance of 2 mm and bond strength > 1N/sqmm according to ASTM C 882-78 complete all as specified and as directed by Engineer-in-charge.Note :- Mode of measurement: per sqm of application area of concrete. |
| 104 | Apply SBR based bonding agent to the entire concrete surface prior to building up of concrete with Polymer modified mortar or any other treatment , including cleaning the surface to remove dirt, dust or any other impurities on the surface, etc. complete in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and as directed by Engineer-in-charge. |
| 105 | Rebuilding the section of structural damaged RCC/PCC elements of Roof, Ceiling, Chajja, Fascia, Fins, Drops repair to spalling concrete to its original size and shape in layers of 10 mm average thickness in 1st layer by providing and applying with pre-batched, one component fiber based repair mortar having compressive strength >= 50 N/sqmm (28 days) according to ASTM C 109; flexural strength >= 5N/ sqmm (7 days) according to ASTM C 293-79 complete all as specified and as directed by Engineer-in-charge. |
| 106 | All as per Srl item No 105 here-in-above but for each additional 10mm uniform thickness for subsequent layers. |
| 107 | M&L for Hardcore of broken stone of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 108 | M&L for Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base, foundation filling and mass concrete, complete all as specified and directed. |
| 109 | M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation , filling and mass concrete surface complete all as specified and directed. |
| 110 | S&F Mild Steel work in tubular trusses, channel, angle, plates including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade st-240 and similar work complete. |
| 111 | S&F, Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed. |
| 112 | S&F mild steel works as in Hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled or countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, post and struts in fencing including cutting tops to shape as directed, drilling, holes, notching for wire etc, flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 113 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line , level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand) including making joints with with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm ) including making drainage opening wherever required complete. |
| 114 | Removing excavated soils/material to a distance exc. 250m but not exc. 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 115 | M&L for preparation of new concrete surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint complete all as specified. |
| 116 | Supply and spread river sand 8cm thick to required width at bottom and 15cm thick on top for cable cushioning (total thickness of sand cushion will be measured after hand punning and shall be not less than 18cm thick in layer) complete all as specified and directed. |
| 117 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type-1, flat, size 250mm x 150mm x 40mm, ISI matked, laid flat across the cable length complete all as specified and directed. |
| 118 | Taking down carefully existing copper/Aluminum point wiring (light,fan, socket or power) complete including fixture and fittings such as switches, bell pushes, ceiling roses, pendants, regulators, sockets, light fitting, call bells etc removing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing color complete all as specified and directed. |
| 119 | Material and labour for one light / fan point controlled by one, one way modular switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia in medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall complete and including modular metal flush boxes not less than 1.6mm thick alongwith modular cover plate with frame of any size for mounting of any type modular switches/sockets/bell switch /fan regulator and brass screws, cup washers etc complete, making good the distributed surfaces completely matched and finished with existing surfaces including painting of walls etc complete all as specified and directed. |
| 120 | All as per srl item No. 119 (here-in-before) but One 3 pin socket outlet 6 Amp on same board point, complete all as specified and directed |
| 121 | All as per srl item No. 119 (here-in-before) but One 3 pin socket outlet 6 amp on the independent board point complete all as specified and directed |
| 122 | All as per srl item No. 119 (here-in-before) but One light point controlled by two way switch with PVC FR-LSH Cable size 1.5 Sqmm complete all as specified and directed |
| 123 | All as per srl item No. 119 (here-in-before) but for 15/16 Amp socket out let/power point by using 4.0 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 4.0 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed |
| 124 | Material and labour for one light / fan point controlled by one, one way modular switch 06 Amp wiring with 2.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 2.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia in medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall complete and including modular metal flush boxes not less than 1.6mm thick alongwith modular cover plate with frame of any size for mounting of any type modular switches/sockets/bell switch /fan regulator and brass screws, cup washers etc complete, making good the distributed surfaces completely matched and finished with existing surfaces including painting of walls etc complete all as specified and directed. |
| 125 | All as per srl item No. 120 (here-in-before) but One 3 pin socket outlet 6 Amp on same board point, complete all as specified and directed |
| 126 | All as per srl item No. 120 (here-in-before) but One 3 pin socket outlet 6 amp on the independent board point complete all as specified and directed |
| 127 | All as per srl item No. 120 (here-in-before) but for 15/16 Amp socket out let/power point by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed |
| 128 | All as per srl item No. 120 (here-in-before) but for power point (Geysers) by using 4.0 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 4.0 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed |
| 129 | S & F Modular switch 1 way 6A/10A 1 module single pole complete all as specified and directed. |
| 130 | S & F Modular switch 1 way 16A, 1 module single pole complete all as specified and directed. |
| 131 | S & F Modular Socket oultet 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified. |
| 132 | S & F Modular Socket outlet 6A/16A - 2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified. |
| 133 | S & F Modular switch 2 way 6A, 1 module single pole complete all as specified and directed. |
| 134 | S & F Modular Fan step regulator, 120W - 2 module with 5 steps type complete all as specified. |
| 135 | S & F buzzer, Ding Dong type AC 230 volts complete all as specified and directed. |
| 136 | S & F ceiling rose surface bake lite with 3 terminals complete all as specified and directed. |
| 137 | S&F in repair Lamp holder PVC/polycarbonate type with back plate complete all as specified |
| 138 | S&F of 9 watt LED bulb suitable for B-22 type holder complete all as specified |
| 139 | Taking down old complete and supply and fixing of SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. |
| 140 | Supply and fixing in replacement of 4 feet long LED tube light fittings, 25 Watt extruded aluminium of cool white / warm comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed. |
| 141 | Supply and fixing of wall mounted extruded Aluminium LED batten fixture T8(G13 holder) 1.2 m, compatible for existing T8 retrofit tube including LED tubelight 20(±10%) watt, 1.2 m T8 6500K,efficacy not less than 90 lumen/watt, complete including making connection complete all as specified and directed. |
| 142 | S&F LED panel light fitting, recessed mounted, square shaped of size 595x595x65 sqmm, 36(±10%)watts efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed. |
| 143 | Supply and fixing in replacement of LED Building security light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant complete with IP 65/66 protection including fixing with GI/MS bracket made out of suitable size of light grade tube upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete all as specified and directed |
| 144 | Supply and fixing in replacement of LED flood light fitting square shape 150 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp, bracket with impact and corrosion resistant complete with IP 65/66 protection with suitable bolt and nuts, fixing at any height upto 15m complete with making connection complete all as specified and directed |
| 145 | Taking down old complete and Material and labour sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to matched and finised with existing surface are included in the ratecomplete all as specified and directed.Make of cable - Polycab/Havells/Grandlay cable Note:- (i) 2 run of 6.0 Sqmm main cable, one run of 6.0 Sqmm earth wire and one run length of PVC conduit of size 25mm shall be considered as one running length.(ii) The wiring shall be done in proper color coding using Red,Yellow, Blue for phases, Black for neutral and Green for earth. |
| 146 | Taking down old complete and Material and labour sub main wiring with 10 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 10 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to matched and finised with existing surface are included in the rate complete all as specified and directed.Note:- (i) 2 run of 10.0 Sqmm main cable, one run of 10.0 Sqmm earth wire and one run length of PVC conduit of size 25mm shall be considered as one running length.(ii) The wiring shall be done in proper color coding using Red,Yellow, Blue for phases, Black for neutral and Green for earth.. |
| 147 | Taking down old complete and Material and labour sub main wiring with 10 Sq mm nominal cross sectional area, four single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 10 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to matched and finised with existing surface are included in the rate complete all as specified and directed.Note:- (i) 4 run of 10.0 Sqmm main cable, one run of 10.0 Sqmm earth wire shall be considered as one running length.(ii) The wiring shall be done in proper color coding using Red,Yellow, Blue for phases, Black for neutral and Green for earth |
| 148 | Taking down old complete and supply and fixing of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. |
| 149 | Taking down old complete and supply and fixing of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. |
| 150 | Taking down old complete and Supply and fixing of TPN MCCB DB 04 Way and provision MCCB as incomer,,double door, AC, 440 volt, with 200 Amp rated bus bar , sheet metal enclosure complete with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and as directed . |
| 151 | Supply and fixing of SP MCB 6-32 Amp ,240Volt 10 KA ‘C’ series complete all as specified and directed. |
| 152 | Supply and fixing of SPN MCB 40-63 Amp ,240Volt 10 KA ‘C’ series complete all as specified and directed. |
| 153 | Taking down old complete and supply and fixing of SP MCB 6-32 Amp ,240Volt 10 KA ‘C’ series complete all as specified and directed. |
| 154 | Taking down old complete and supply and fixing of SPN MCB 40-63 Amp ,240Volt 10 KA ‘C’ series complete all as specified and directed. |
| 155 | Taking down old complete and supply and fixing of TPN MCB 100 Amp ,415 Volt 16 KA ‘C’ series complete all as specified and directed. |
| 156 | Taking down old complete and supply and fixing of MCCB 4 Pole, 125 Amps, 50 Hz, 25KA, 415 Volts,adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, etc complete all as specified and directed. |
| 157 | Supply, installation, testing and commissioning of Electric Water Heater (Geyser) capacity of 25 Ltrs, heating element upto 2 KW, 230 volt, BEE 5 star rated storage type steel/PVC body with stainless steel with a glass linked (Vitreous emamel) inner tank comprising with heating element, safety value, thermostate and automatic thermal cutoff, NRV, require all accessories complete and including suitable 04 Nos rawl plug alongwith Nuts & Bolts for mounting on wall and making functioning complete all as specified and as directed. |
| 158 | S & F of Heavy duty steel body Exhaust Fan of 300mm sweep, with blade 240 volt, energy efficient complete with louvers and shutter and mounted on wall with suitable opening arrangement in wall and connection up including 3 crore PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan copmplete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distrubed wall in cement mortar white washing to match with existing colour complete all as specified and as directed |
| 159 | Taking down old complete and M&L labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed. Note : (i) Cost of GI earth strip and GI protection pipe upto 7.5 Mtr length shall be deemed to be included in the rate quoted for this item. |
| 160 | Supplying, Laying ,and testing in of XLPE insulated armoured heavy duty electric cable of the size 25 Sqmm 2 core following size ,1100 Volts grade , with stranded aluminium conductor served with aninner sheathing of PVC tape armoured with GI wire and over all PVC sheathed in laid trenches/ passing through pipe/duct/road crossing/surface of wall/in hume pipe etc including fixing hardware,clamps,gland, thimble and making good the damaged surfaces etc complete all as specified and as directed. |
| 161 | Supply and Fixing of ceiling fan 5 star with remote rated ISI marked 1200mm sweep , 230 Volt ,50Hz AC supply with brushless direct current motor (BLDC) 6.00 BEE alongwith down rod, canopy complete and connecting up including provision of three core flexible PVC cable with stranded copper conductor of size 0.75 Sq.mm from ceiling rose to connector of ceiling fan complete all as directed and as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender