Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #56865923

Tender For Provision Of Hard Standing Near Bldg No. P-44, P-45, P-48 And P-P-49 (Approx 2550 Sqm) Of Supply Sheds And Addn/Altn Of Certain Portion Of Bldg P-253 Non-Commissioned Officer Bar Under Age B&R-Ii Of Ge(S) Bathinda At Bathinda Mil Stn (Job

Issued by Statutory Bodies & Commissions/Committees · Bathinda, Punjab
Tender Value
48.34 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
17 days left
EMD
96680
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Provision Of Hard Standing Near Bldg No. P-44, P-45, P-48 And P-P-49 (Approx 2550 Sqm) Of Supply Sheds And Addn/Altn Of Certain Portion Of Bldg P-253 Non-Commissioned Officer Bar Under Age B&R-Ii Of Ge(S) Bathinda At Bathinda Mil Stn (Job No. Lbw-08 Of 26-27 And Minor-15 Of 26-27)

BOQ

Name of Work:- PROVISION OF HARD STANDING NEAR BLDG NO. P-44, P-45, P-48 AND P-P-49 (APPROX 2550 SQM) OF SUPPLY SHEDS AND ADDN/ALTN OF CERTAIN PORTION OF BLDG P-253 NON-COMMISSIONED OFFICER BAR UNDER AGE B&R-II OF GE(S) BATHINDA AT BATHINDA MIL STN (Job No. LBW-08 OF 26-27 and Minor-15 of 26-27)
Sl. No. Item Description
1Surface excavation n.exc 30cm depth & average 15 cm deep & getting cut in soft/loose soil complete all as specified and as direcetd.
2Removing excavated earth at a level n exc 1.5 m above the starting point to a distance n exc 50m complete all as specified and directed.
3Material & labour for hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surfaces of broken stone or boulder complete all as specified and directed.
4Material & labour PCC (1:3:6) Type C-2 (using 40 mm graded stone aggregate) in foot path / walk way surfaces finished even & smooth without using extra cement complete all as specified and directed.
5Material & labour PCC (1:2:4) type B-2 using 40mm graded stone aggregate in foot path/ walk way surface finished / side locking of path etc, even & fair without using extra cement complete all as specified and directed.
6M & L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block/ interlocking tile of M-30 grade, prepolished & preglazed, with approved colour, design & pattern (laid in required colour & pattern as directed) as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed
7&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing lining board, etc complete all as specified and as directed.
8Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.
9M&L for providing PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as direcetd.
10M & L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 metre mean radius in CM 1: 4 complete all as specified and directed.
11M & L for virified ceramic tile dark shade 8-9mm thick double charged/ultra charged (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00sqm, in floor etc,. Set and jointed in neet cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
12Dismantling floor, hearth of wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises complete all as specified and directed.
13M & L for providing screed bed or bedding layer of CM 1:6 of 15mm thick for laying floor finishes complete all as specified and as direcetd.
14S&F glazed ceramic coloured tiles 600 x 300mm, 7mm thick as in verticle surfaces such as dado / skirting and risers to steps etc. set and jointed in neat cementg sulrry and pointed in white or coloured cement to match the colour of tiles complete all as directed and specified.
15M & L for rendering 10mm thick in cement mortar 1:4 for rough finish to receive tiles on vertical surfaces as screed bed for below dado/ skirtings etc. complete all as directed and specified.
16Material and Labour Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.
17M&L for Complete removal of existing treatment of any description on old wall surfaces of any description, preparation of surfaces by mechanized sander having suction vacuum bag using smart periodical methodology complete all as specified and applying two or more coats of 100% Premium exterior acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
18M & L for preparation of old surfaces of ceiling and applying one coats of white wash complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56865923
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 48.34 Lakhs
LAST DATE 27-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provision Of Hard Standing Near Bldg No. P-44, P-45, P-48 And P-P-49 (Approx 2550 Sqm) Of Supply Sheds And Addn/Altn Of Certain Portion Of Bldg P-253 Non-Commissioned Officer Bar Under Age B&R-Ii Of Ge(S) Bathinda At Bathinda Mil Stn (Job No. Lbw-08 Of 26-27 And Minor-15 Of 26-27)
Basic Detail
Tender No GE(S)BTD-46 of 2026-27
Bidding Type Tender
Location
City Bathinda
State Punjab
Key Dates
Publish Date 06 Aug 2026
Submission Date 27 Aug 2026
Open Date 29 Aug 2026
Finance
Tender Value 48.34 Lakhs
Tender Fee 500
EMD 96680
Exemption Not Available
Document List
1b9766bb-4acd-41c4-b44b-0f47d08c8826.html
BOQ_877212.xls
TenderdocuGE46_I.pdf
TenderdocuGE46_II.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Aug 29, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
html

1b9766bb-4acd-41c4-b44b-0f47d08c8826.html

xls

BOQ_877212.xls

pdf

TenderdocuGE46_I.pdf

pdf

TenderdocuGE46_II.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders