Tender For Restoration Of Electrical Illumination System With Allied Electrical Works At Baisakhi Abasan,Block-Ag,Sector-Ii,Salt Lake City, Kolkata-91 To Be Executed By Central Mechanical Division,Slrdc , Under Ud & Ma Department,
Tender Value
11.03 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
5 days left
EMD
22075
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Electrical Illumination System With Allied Electrical Works At Baisakhi Abasan,Block-Ag,Sector-Ii,Salt Lake City, Kolkata-91 To Be Executed By Central Mechanical Division,Slrdc , Under Ud & Ma Department,
BOQ
| Sl. No. | Item Description |
| 1 | SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATE AMENDMENTS. (Rate in Rs. Per Mtr)Finolex/Gloster make |
| 2 | 4 CORE 35 SQ MM |
| 3 | 4 CORE 16 SQ MM |
| 4 | SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR UNARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATE AMENDMENTS. (Rate in Rs. Per Mtr) Finolex/Gloster make |
| 5 | 2 CORE,6 Sq mm for pole connection |
| 6 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed, |
| 7 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. |
| 8 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. |
| 9 | For 4 core upto 35 sqmm |
| 10 | 4 CORE 16 SQ MM |
| 11 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials,. |
| 12 | For 3½ core 35 sqmm cable |
| 13 | 4 CORE 16 SQ MM |
| 14 | Supply of 3 pole power contactor type ML 1.5, 25A current rating. |
| 15 | Supply of 240VAC analog time switch for ON-OFF control of street light. . |
| 16 | Supplying and fixing Sheet steel Main Switches on flat/ angle iron frame on wall |
| 17 | 100/125 A 415V TPN with fuse on L&N Standard make |
| 18 | 60/63 A 415V TPN with fuse on L&N Standard make |
| 19 | 30/32 A,240V DP with fuse on L&N Standard make |
| 20 | Supply of 3-ph DOL Starter MN 16DOL . |
| 21 | Fixing only starters (for motor control) on flat iron frame / angle iron frame on wall |
| 22 | Direct on Line starter for motor (upto 5 HP) On angle ironframe (for higher rating). |
| 23 | Star-Delta starter for motor (above 5 HP upto 15 HP)On angle iron frame (for higher rating). |
| 24 | Supply & delivery of 415 V, 50 Hz,3 Ph.AC Fully Automatic Star Delta Starter of Continuous duty in sheet steel enclosure of the following capacity (make:L&T/ABB/SCHNEIDER):12.5 HP ( with Relay of Max Range in Amp 9-14). |
| 25 | Supply and fixing of smart bright essential street light (70 Watt) complete with all accessories to be fixed /projected from the wall of the building or on pole incl. making holes/ providing clamping arrangement & necy. GI reducer as F.10 required. S&F 40mm GI pipe (ISI-Medium) quality 1.5 mts.average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.Make: Philips, 68 watt . |
| 26 | Supplying&fixingsheet metal (16SWG)Iron Clad Busbar chambers on angle iron frameonwall, incl. earthing attachment andpaintingas required–( As per Drawing no. 470 of PWDSpecification Book – May 1991) Dimension of Cu. bars [85mm long] 4 bars,415 V, 100/125 A, 4 x 15x3mm . |
| 27 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) 4 bars,415 V, 100/125 ADimension of Al. bars [85mm long] 4 x 25x5mm,Dimension of Sheet Metal Box 500x150mm . |
| 28 | Supply, fixing, testing & commissioning wall/floor mounted LTpanel primer coated with powder coated paint &provided with required gasket for dust/vermin proof with degree ofprotection IP42 suitable for 415Volt 3phase, 50 Hz, 4 wire system fabricated out of CRCA sheet up to 2 mm thick (1.6mm for doors) duly compartmentalized for incomer, bussection, outgoings, cable alleys & CT, PT Ampere, Volt , selector switches, frequency, phase indicating lamp, Energy complete including cost of busbar supports, detachable cable gland plates,2 earthing terminals, internal wiring &fixing of separately supplied MCBs, MCCBs, ACB, panel mounted changeover switch/SFUs, etc. as required but excluding cost of busbar strips, Ampere, Volt, selector switch as perapproved design & specification. |
| 29 | Supply and Fixing of fuse unit complete with base and bridge on existing Board and necessary connection, for the following range. |
| 30 | 100 Amp., 415 V |
| 31 | Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make andbrand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping]In Ground Floor,6mm. |
| 32 | Supplying and Drawing 1.1 KV single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2 x 56/0.3 (4 sqmm) . |
| 33 | Supplying and fitting fixing of PVC casing-capping of size 25x12 mm inside metering box up to satisfaction of EIC. PWD Electrical 2017 pg K-1 ,49 |
| 34 | Supplying and fitting fixing of 19mm heavy gauge Polythene Pipe inside metering box up to satisfaction of EIC. . |
| 35 | Supply and fixing of greenline V2 street light (115 Watt) complete with all accessories to be fixed /projected from the wall of the building or on pole incl. making holes/providingclamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmmPVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. Make: Philips, 115 watt |
| 36 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint |
| 37 | (i) One coat of red lead/Zinc chromate priming |
| 38 | (ii) 1st coat of synthetic enamel paint over the primer |
| 39 | (iii) 2nd coat of synthetic enamel paint over the 1st coat |
| 40 | Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting.250 x 250 x 100mm. |
| 41 | GST@18% on total amount |
| 42 | CESS@1% on total amount Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender