Tender For Estimate For Repair And Renovation Of Building For Ziledari Dialpura Office At Budhlada Canal Sub Division Budhlada (Sangreri)
Tender Value
16.18 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
9 days left
EMD
32500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mansa → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Repair And Renovation Of Building For Ziledari Dialpura Office At Budhlada Canal Sub Division Budhlada (Sangreri)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing Jack arch roofing excluding joists or terraced roofing |
| 2 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled Doors of area 3 sqm and below. |
| 3 | Scraping Mud plaster |
| 4 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material |
| 5 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ). Size 600x600 mm |
| 6 | Flat brick or tile flooring laid dry over a bed of 6mm thick cement sand mortar 1:6 grouted with cements sand mortar 1:4 and top surface to be left clean after wire brushing |
| 7 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro- hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS Code 15658(2006) for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footpaths). |
| 8 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading |
| 9 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 10 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. |
| 11 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure |
| 12 | Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications. |
| 13 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres |
| 14 | Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction ofEngineer-in-charge. Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter. |
| 15 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 16 | Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make Glass panes 4mm or10.75 kg / sqm exceeding 0.4 sqm of area |
| 17 | Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. |
| 18 | Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flash-welded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:-Glazing, wire gauge and grill will be paid as per respective items) |
| 19 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on an |
| 20 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed (working U-PVC pipes (working pressure 4 kgf. / sqcm) pipe 110 mm dia. |
| 21 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing UPVC 110 mm bend |
| 22 | Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 inclu UPVC 110 mmCoupling /Sockets |
| 23 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement |
| 24 | Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm |
| 25 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall fi |
| 26 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm thick |
| 27 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm |
| 28 | Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them 30 mm thick |
| 29 | Providing and fixing18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842 - 2000, including top cover of 6 mm coir veneer board, nickel plated MS Pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm MS Flat 10 cm long and rawl plug 50 mm long (designation 10 no) etc., all complete |
| 30 | Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete |
| 31 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 32 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. |
| 33 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 34 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc |
| 35 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 36 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 37 | 12.5 mm thick cement plaster 1:4 |
| 38 | Providing and fixing steel rings chrome-plated 3.80 cm. |
| 39 | Providing, Laying, fixing & NO. 28-15 jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984-1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testingcomplete as per specifications. (A) H.D.P.E pipe PE-80 of 10 Kg 32 mm o/d |
| 40 | SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable(ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having Steptype electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches withindicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), MS saddle clamp, PVC Circular junction Boxes (Four way 1½\\" deep for walls), bonding to earth with PVC insulated copper conductor single core FR cable(ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material and painting as required:-Wiring fan point (Without fan box) |
| 41 | Wiring light point |
| 42 | Wiring 6Amp. Plug control comprising wall socket point |
| 43 | Wiring 16/20Amp. power plug control point |
| 44 | SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-6/10amp. One Way Modular Switch (One Module) |
| 45 | 16/20amp. One Way Modular Switch with Indicator (One Module) |
| 46 | (16/20amp. Universal Modular Shuttered Socket (two Module) |
| 47 | Step type Modular Electronic Fan Regulator 100watts (One Module) |
| 48 | Bakelite Batten Holder (Large size) |
| 49 | 6amp. 2/3 Universal Modular Shuttered Socket (two Module) |
| 50 | Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:-((b)) Modular Cover Frame Three Module |
| 51 | ((c)) Modular Cover Frame Four Module |
| 52 | ((d)) Modular Cover Frame Six Module |
| 53 | ((e)) Modular Cover Frame Eight Module |
| 54 | ((xxxiv)) Supply and erection of Concealed Metal Boxes ofvarious sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) withbrass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishingthe surface):-(b) Powder Coated Concealed Metal Box with Brass Lugs Three Module |
| 55 | (c) Powder Coated Concealed Metal Box with Brass Lugs four Module |
| 56 | (d) Powder Coated Concealed Metal Box with Brass Lugs Six Module |
| 57 | (e) Powder Coated Concealed Metal Box with Brass Lugs Eight Module |
| 58 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-((i)) Overall (Un-sheathed) size 1sq.mm |
| 59 | ((ii)) Overall size 1.5sq.mm (Un-sheathed) |
| 60 | ((iii)) Overall size 2.5sq.mm (Un-sheathed) |
| 61 | ((iv)) Overall (Un-sheathed) size 4sq.mm |
| 62 | XLPE INSULATED LT CABLES:XLPE INSULATED ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to belaid (On Surface) as per PWD General Specifications:-((xxii)) Overall size 25sq.mm (3½ Core) Armoured (On-Surface) |
| 63 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks,M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- ((i)) Heavy Gauge PVC Conduit Pipe 20mm dia. (On Surface) |
| 64 | ((ii)) Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) |
| 65 | MINIATURE CIRCUIT BREAKERS/ RCBO‘s/ RCCB‘s:(34.16 A) MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB‘s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 66 | ((xvi)) MCB Four Pole 50, 63amp. (10kA, Curve-C) |
| 67 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB‘s/ RCBO‘s/ RCCB‘s: Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars,earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of uired no. of ways for mounting miniature circuit breakers/ RCBO‘s/ RCCB‘s in the distribution board (For SP&N distribution board with provision DP MCB‘s/ RCCB‘s/ RCBO‘s as incomer and SP MCB‘s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB‘s/ RCCB‘s/ RCBO‘s as incomer and SP MCB‘s as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-((iv)) SP&N Double Door Distribution Board 16 way each |
| 68 | DISMANTLING WIRING POINTS & FITTINGS:Dismantling old wiring points including necessary repairs to wall etc:-((i)) Fan, light or call bell point |
| 69 | ((ii)) Wall socket, power plug point |
| 70 | SANITARY INSTALLATIONS (4) Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction ofEngineer-in-charge. |
| 71 | Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect. |
| 72 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 73 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 74 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval ofEngineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in allrespect. |
| 75 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. (ii)) Size 550 mm x 400 mm x 815 mm |
| 76 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.((b)) C.P brass towel ring |
| 77 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) ((b)) Size 550mmx400mm |
| 78 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.((a)) PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut |
| 79 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.(B) Single Socket Type B (b) 110mm o/d SWR UPVC pipe lines laid complete |
| 80 | ( A) Single Socket Type A 90mm o/d single socket SWR UPVC pipe lines laid complete |
| 81 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.((a)) Size 75 mm x 75 mm |
| 82 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.(B) For 110mm o/d pipes (ii) Single Tee With Door |
| 83 | (vi) Vent Cowls |
| 84 | (x) P Trap/Floor Trap 110mm x 75mm |
| 85 | (viii) Coupler |
| 86 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge ) with various fixtures complete in all respect.(i)) C.P. Brass extension piece, 25mm long to 50mm long |
| 87 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )completein all respect.((i)) C.P. brass Bib cock long nose/ long body foam flow without flange |
| 88 | ((ii)) C.P. brass Bib cock foam flow without flange |
| 89 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.((c)) C.P.brass 15mm Angle valve without flange |
| 90 | Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.((b)) Water Cooler Full Steel Body 60/80 ltr Capacity without Stablizer |
| 91 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.((ii)) Double Layer Tanks |
| 92 | WATER SUPPLY Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good the same & finishing according to existing finish where required.(b) Through floor or roof 11.5cm thick |
| 93 | Providing ceiling Fan |
| 94 | Providing LED Tube light of 20W |
| 95 | Providing SOLAR LED EXTERIOR LIGHTS |
| 96 | Providing Office Chair |
| 97 | Providing Office Table |
| 98 | Providing Air CONDITIONER 2 TON for rest house |
| 99 | Revolving chair |
| 100 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender