Tender For Modification In Lt Panel Room And Other Allied Works At Nilothi Sps Under Isp Package 2.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Aug 2026
2 days left
EMD
49900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Modification In Lt Panel Room And Other Allied Works At Nilothi Sps Under Isp Package 2.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of Duct able Air Conditioner 5.5 TR Units (Indoor and outdoor) Comprising of scroll Compressor, with R410 Gas, Evaporator Coil, thermostatic expansion device, air cooled condensers with specially coated fins, centrifugal blower, TEFC Motor, Microprocessor based control panel having centrifugal forward curved double width air delivery system with 2200 cfm capacity etc along with temperature controller unit with minimum noise. Make Carrier/Toshiba |
| 2 | Installation of Duct able Air Conditioner 5.5 TR Indoor and outdoor units with all required scews etc as per site requirement at site |
| 3 | Supply of Copper Piping Between Indoor to Outdoor Unit. 7/8,5/6 |
| 4 | Supply of 7 corex2.5mm Wiring. Between Indoor to Outdoor Unit. |
| 5 | Supply Installation, testing & commissioning of drain 25mm to remove condense water |
| 6 | Supply of stand for outdoor units. Cap-5.5 TR |
| 7 | Supply & laying of 4 core 10 sq mm copper cable Make KEI/Havells/Polycab /Any DJB Approved |
| 8 | Supply & laying of 1 core 2.5 sq mm copper cable Make KEI/Havells/Polycab /Any DJB Approved |
| 9 | Supply and installation of 4 Pole 40 Amp MCB Make Havells/ Polycab |
| 10 | Supply and installation timer with contactor for sequential operation of AC on hourly basis & Conection from main panel using 10 Sq mm 4 Core cable |
| 11 | Supply, Fabrication, Installation and testing of Site Fabricated sheet metal ducts in accordance with the approved shop drawings and specifications complete with flanges including neccessary support and shall also confirm to the BIS specifications. 0.63mm (24 gauge) GSS |
| 12 | 0.8 mm (22 gauge) GSS |
| 13 | Supplying, fabricating, installing and testing of double canvas flexible connection for constructed of standard material as per the drawings/ specifications. |
| 14 | SITC Of Supply Air Diffuser |
| 15 | 09 mm thick Insulation |
| 16 | Acoustic - 10mm insulation |
| 17 | Work of Separation of open space and Provision of Gates Partition work with extruded aluminum framework combined with glass , height 15 Feet and Width 60 Feet , including 3 Nos Gates to enter in VFD Panel room , Partition will be 3 Feet ACP sheet from Ground Level, there after 3 Feet Glass & rest ACP Sheet upto roof, work also includes closure of small opening like exhaust Fans, transformer ducts etc with all required tools and men power for unloading the material at site and complete execution as per instructions of engineer in charge at site. |
| 18 | Providing and fixing of fall ceiling of size 2 x 2' along with all required hanging structure. |
| 19 | Providing and fixing of 36 W LED recess mounting light of size 2 x 2' 220V 50 Hz operated Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender