Tender For special Repair To Bldg No P-280 And Hardstanding Of Mt Office Bldg At 422 Fd Hosp Under Ge(West) Delhi Cantt-10
Tender Value
45.16 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
11 days left
EMD
90320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-280 And Hardstanding Of Mt Office Bldg At 422 Fd Hosp Under Ge(West) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 2 | M&L for cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in hardstanding, ramps,filling and mass concrete, laid in bays and finished even and fair complete all as specified and directed. |
| 3 | M&L for RCC M25 design mix, using 20mm graded stone aggregate in basement slabs, hardstanding floors including mixing of metallic floor hardener, ramps and mass concrete complete all as specified and directed. (Note: Metallic hardener qty will be paid separately ) |
| 4 | Supply of metallic floor hardener for mixing in RCC complete all as specified and directed |
| 5 | Use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, hardstanding, floors ,ramps , sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 6 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, floor,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 7 | Ditto as per Item No. 6 above but 6mm dia to 8mm dia complete all as specified and as directed. |
| 8 | Spike rolling to surface or making impressions of expanded metal,whilst concrete is green complete all as specified and as directed. |
| 9 | Roughening surface of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc |
| 10 | Brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed |
| 11 | Forming 12 mm thick expansion joints filled with pre formed bituminous filler with glass strip and top 30 mm primed and sealed with sealing compound Grade A depth upto 100mm complete all as specified and directed. |
| 12 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with Grade'A' sealing compound complete all as specified and as directed. |
| 13 | Forming Construction joint 30mm deep x 10mm wide filled with Grade'A' sealing compound complete all as specified and as directed. |
| 14 | M&L for preparing the surface by Complete removal of existing treatment any layer by scraping by mechanical or manual means, wasing down, cleaning and making good including necessary scafolding complete all as specified and directed. Note :( height of building up to 4 Storey) |
| 15 | M&L for 1 mm thick wall care putty to entire surface to bring uniform surafce on wall or ceiling surface prepared complete all as specified and directed. |
| 16 | M&L for Priming plastered and other surfaces with alkali resistant priming paint complete all as specified and as directed. |
| 17 | M & L for applying two coats of cement base paint on wall surface using spray machine/roller brushes prepared complete all as specified and directed. Note :( height of bilding up to 4 Storey) |
| 18 | M&L for applying two coats of white lime wash on ceiling surface prepared by manualy including necessary fevicol, blue tint etc complete all as specified and directed. Note :( height of bilding up to 4 Storey) |
| 19 | M & L Rendering 12-15mm thick in Ready Mix plaster on brick work, parapet wall, roof beam floor beam and coloumn etc on brick or concrete surfaces and finished even and smooth, work including taking down cement plaster any description from wall surface and removing rubbish beyond MOD land complete all as specified and directed and necessary scafolding. Note :( See the site before quoting rate and height of bilding up to 4 Storey) . |
| 20 | M & L Rendering 10mm thick in Ready Mix plaster on concrete surfaces of Ceiling and finished even and smooth as a whole or in patch work including taking down cement plaster any description from ceiling surface and removing rubbish beyond MOD land complete all as specified and directed. |
| 21 | M&L for providing PMM (Polymer modified cementitious mortar ) :-(i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes) (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note: Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed. |
| 22 | M&L for brick work with well burnt sub-class B bricks straight or curved on plain exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 23 | M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair incl filling the joint with bitumen mastic complete all as specified and directed . |
| 24 | Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, mud phuska etc including cleaning the surface by water/air pressure and removal of debrish beyond MOD land complete all as specified and directed |
| 25 | M&L for brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed |
| 26 | M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and directed Please Enable Macros to View BoQ information |
| 27 | M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender