Tender For Welcome Maintenance Of Officer Md Accn A Block And Tarapore Enclave Including Internal Electrification In Aor Of Ge Narangi
Tender Value
40 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
16 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance Of Officer Md Accn A Block And Tarapore Enclave Including Internal Electrification In Aor Of Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise etc complete all as specified and as directed |
| 2 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 3 | Taking up or down 15 mm bore steel tubing and connections including complete all as specified and as directed. |
| 4 | Taking up or down 20 mm bore steel tubing and connections including complete all as specified and as directed. |
| 5 | Demolition and breaking up drain pipes up to 100 mm dia bofe (Salt glazed ware, AC or Reinforced concrete) set in cement mortar etc complete all as specified and as directed |
| 6 | Demoition of Stone slabs and tiles of any description or thickness in floors, aprons , laid bedded and pointed in any mortar etc complete all as specified and as directed |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed |
| 8 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed |
| 9 | Hacking out old broken glasses ( any thickness/type and in any position ) from wooden frames/metal frames fixed with oil putty or beads etc and removing from site all as spd. complete all as specified and as directed. |
| 10 | Demolition of brick work /stone masonry masonry built in cement mortar of any description complete all as specified and as directed. |
| 11 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/ stone /concrete surface etc complete all as specified and as directed |
| 12 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed |
| 13 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed |
| 14 | Taking down shutter of any description area exc 1.00 Sqm but not exc 4.00 sqm each etc complete all as specified and as directed |
| 15 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and as directed |
| 16 | Material and labour RCC Nominal Mix Type A1 (1:1.5:3) using 20 mm graded stone aggregate on slabs supported on walls, beams and columns in floors , roofs,landings,balconies, canopies deck slabs and in shelves and the likew complete all as specified and as directed |
| 17 | Material and labour for cement concrete 1:3:6 type C-2 , (using 40 mm graded stone aggregate ) as in foundation filling and sunken floors etc complete all as specified and as directed |
| 18 | Material and labour for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed |
| 19 | Material and labour providing cement concrete type B0 1:2:4 (using 12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed |
| 20 | Material and labour Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc complete all as specified and as directed |
| 21 | Material and labour for brick work with sub class \\"B\\" bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed |
| 22 | Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed. |
| 23 | Material and labour for Mirror polishing 20 mm thick Granite (of any type) with high gloss finish machine cut, in floor etc laid over cement screed and jointed with grey cement slurry and pointing with white cement with admixture of pigment to match the shade of granite stone including grinding & necessary polishing & over 15 mm thick screed with 1:6 CM complete all as specified and directed. |
| 24 | Material and labour for Mirror polishing 20 mm thick Granite (of any type) with high gloss finish machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointing with white cement with admixture of pigment to match the shade of granite stone including grinding & necessary polishing & over 10 mm thick rendering with 1:4 CM complete all as specified and directed. |
| 25 | Material and labour for 12mm to 14mm thick green marble slab for kitchen plat form / shelf and vertical faces duly machine polished full round on external/projected surface over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and as directed. |
| 26 | Material and labour for form work on flat sides to soffits of suspended roof slabs not exceeding 200mm thick (Horizontal or sloping) rough finished surface of concrete complete all as specified and as directed |
| 27 | Material and labour Formwork to edges of roughed finished surface of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizintal or sloping and similar work exc 10cm but n exc 20cm wide concrete all as specified and as directed. |
| 28 | Supply and fix 30 mm thick flush door shutter solid core construction with block board core and ply wood face panes, connerical tuype on both sides etc complete all as specified and as directed |
| 29 | Supply and fix 2nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and as directed |
| 30 | Supply and fix 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed. |
| 31 | Material and labour for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 32 | Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and as directed |
| 33 | Supply and fix factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed. |
| 34 | Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed |
| 35 | Supply and fix Aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed |
| 36 | Supply and fix 100 mm thick butt hinges, medium weight, stainless steel etc complete all as specified and as directed |
| 37 | Supply and fix 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed |
| 38 | Supply and fix in helical door spring of 150mm long smooth functioning, automatically closing incl welding / reveting etc complete all as specified and as directred |
| 39 | Supply and fix in repairs double action floor springs, hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heave duty and fixed etc complete all as specified and as directed |
| 40 | Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed ' |
| 41 | Supply and fix in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed ' |
| 42 | Supply and fix Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30 mm width of flap when open fixed to wooden frame or shutter any type with screw complete all as specified and as directed ' |
| 43 | Supply and fix CP brass towel rail 60cm long including fitting complete all as specified and as directed ' |
| 44 | Material and labour for 100 mm long Hasp and staple, safety type, aluminium anodised with MS hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 45 | Supply and fix 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished bright finished cubbaoard al las specified and directed |
| 46 | Supply and fix catch magnet , cupboardfixed with nut, screw and washer of aluminium bright finished cubbaoard al las specified and directed |
| 47 | Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed |
| 48 | Supply and fix for Roof trusses (framed), trussed, purlins, crane gantries, rails andfastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.s or other connecting plates FE -290 Gde E-165 complete all as specified and as directed |
| 49 | Material and labour for Steel work in tubular trusses, rafter, purline including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed |
| 50 | Material and labour Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed |
| 51 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed |
| 52 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete all as specified and as directedNote - Wire Cloth & Glass shall be measured and paid separately under respective items. |
| 53 | Supply and fix Factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with double rebates includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 54 | Supply and fix Factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with single rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 55 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 56 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directedNote: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed |
| 57 | Supply and fix in repairs prelaminated particle board 18/19mm, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws and magnet catcher to timber frame work complete all as specified and as directed. |
| 58 | Material and labour for in repairs 18-19 mm thick block boards, grade 2 quality, interior grade, decorative type with decorative lamination on both faces fixed with screws/nails to timber frame work complete all as specified and as directed. |
| 59 | Material and labour for Glazed ceramic tiles (Coloured) as in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick in CM 1:4 for backing coat of tiles / dado etc complete all as specified and as directed |
| 60 | Material and labour for Virified Ceramic tiles (Drak Shade ) 9 to 10 mm thick (square/ rectangular) polished, area of each tiles 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes etc complete all as specified and as directed |
| 61 | Material and labour for Virified Ceramic tiles (Drak Shade ) 9 to 10 mm thick (square/ rectangular) polished, area of each tiles 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10 mm thick in CM 1:4 for backing coat of tiles / dado etc complete all as specified and as directed . |
| 62 | Material and labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each floor tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:4 incl etc complete all as specified and as directed |
| 63 | Material and labourfor Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each Verical tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:4 complete all as specified and as directed |
| 64 | Material and labour for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection ,hard standing etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 65 | Material and labour for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed |
| 66 | Material and labour for 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in flooing etc complete all as specified and as directed |
| 67 | Supply and fix for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over including in 15 mm thick screed bed CM (1:4 etc complete all as specified and directed. |
| 68 | Material and labour for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 69 | Material and labour for rendering 5mm thick in CM (1:3) on faces or brick work or concrete surfaces on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 70 | Material and labour for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed |
| 71 | Material and labour for 50 mm dia and 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6 mm thick in CM 1:4 mixed with integral WPC on uneven surface to make it even. Fill it water and check for dampness and seepage, all junctions points of side walls where CI/GI pipe are passing shall be sealed with epoxy mortar. Apply two coats of polymer modified cementious water proofing coating of minimum thickness of 1 mm each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. Apply 20 mm thick plaster in CM 1:4 mixed with integral WPC of approved make on floors and walls including rounding of corners and junctions stoping towareds spouts. All pipes laid in sunken portions shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anti corrosive black japan paint on GI/CI pipes. Test the water proofed area by filling water at least 72 hours and tested for leakage/seepage for the entire satisfaction of GE. After above said treatment apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors complete all as specified and directed. (Note : If leakage/Seepage occured after filling water at least 72 hours, the above said treatment will be re-done completely) |
| 72 | Material and labour for Preparing new plastered suface of walls and applying two coats of acrylic distemper , white or tinted over a coat of primer etc complete all as specified and as directed |
| 73 | Material and labour for applying three coats of white wash on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 74 | Material and labour for applying three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed. |
| 75 | Material and labour for Complete removal of existing treatment of painted surfaces and 1 mm thick wall care putty priming with alkalie resistant priming paint & applying two coats of acrylic distemper on wall including preparation of walls complete all as specified and directed. |
| 76 | Material and labour for applying one coats of acrylic distemper on old plastered surface of walls including preparation complete all as specifed and directed. |
| 77 | Material and labour for preparation of old treated surfaces of wall by brooming down or by steel wire brushing and one coat of white wash on wall surfaces complete all as specified and directed. |
| 78 | All as per above item no 77 but one coat of white wash on ceiling complete all as specified and directed. |
| 79 | Supply and fix 5.5mm thick tinted sheet glass and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed |
| 80 | Supply and fix 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc complete all as specified and as directed |
| 81 | Supply and fix 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc complete all as specified and as directed |
| 82 | Material and labour for preparation of old painted wooden surfaces of girth or width exc 10 Cms and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 83 | Material and labour for preparation of old painted steel surfaces of girth or width.exc 10 Cms and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 84 | Material and labour for preparation of new or previously un-treated wooden surfaces of any description exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 85 | Supply and fix for 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified and as directed |
| 86 | Supply and fix for 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified and as directed |
| 87 | Refixing old steel tubing 15 mm bore and connections in new or old position (walls/ceilings/floors etc) after cleaning complete all as specified and as directed |
| 88 | Refixing old steel tubing 20 mm bore and connections in new or old position (walls/ceilings/floors etc) after cleaning complete all as specified and as directed |
| 89 | Supply and fix 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc etc complete all as specified and directed |
| 90 | Supply and fix PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed |
| 91 | Supply and fix PVC vent cowls of 110mm dia etc complete all as specified and as directed |
| 92 | Supply and fix in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed |
| 93 | Supply and fix 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc complete all as specified and directed |
| 94 | Supply and fix PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed |
| 95 | Supply and fix in repairs vitreous china squatting pan \\"ORISSA\\" patern of size 580x440mm white, with integral foot rests \\"P\\" or \\"S\\" or trap (excluding flushing cistern & flush pipe) incl provisioning of lime concrete bedding complete all as specified and as directed |
| 96 | Supply and fix in repair vitreous china EWC white with 'P' or 'S' trap front or back inlet any pattern excluding flushing cistern & flush pipe but including plastic water closet seat black closed pattern with flat bottom and cover and hinging device complete all as specified and as directed |
| 97 | Supply and fix in repair PVC valve less syphonic action type flushing cistern 10 ltrs capacity low level white with inlet, ball valve, float and handle including brackets complete all as specified and as directed |
| 98 | Supply and fix in repairs vitreous china ware wash hand basin white colour flat back of size 550x400mm including CI brackets, CP brass waste coupling 32mm etc complete all as specified and as directed |
| 99 | Supply and fix in repairs 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick commercial plywood with Aluminium framed alround fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and directed. |
| 100 | Supply and fix in repair bib tap chromium plated cast copper alloy with capstan head wall flange screwed down screwed for iron pipe 15 mm bore complete all as specified and as directed |
| 101 | Supply and fix in repairs 15 mm Pillar tap cast copper alloy in single lever with capsten head chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe complete all as specified and as directed |
| 102 | Supply and fix in repair 15 mm stop valve (male or female thread) cast copper alloy fancy type chromium plated with long shank and cup (conceled type) with capston head wall flange etc screwed down screwed for iron pipe complete all as specified and as directed |
| 103 | Supply and fix in repair of PVC connection pipe 15 mm dia 450 mm long with PTMT nut complete all as specified and as directed |
| 104 | Supply and fix in repairs Health faucet chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube including making connections and fixed in position etc complete all as specified and as directed |
| 105 | Supply and fix in repairs Stainless Steel Grating doom, 125mm dia with waste hole complete all as specified and as directed. |
| 106 | Supply and fix in repairs sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12mm wide with CP brass bracket guard railing 60cm long complete all as specified and as directed |
| 107 | Supply and fix in repair Towel Ring Square with Round Flange of incl fixing etc complete all as specified and as directed |
| 108 | Supply and fix in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 940mm x 460mm bowl size 405mm x 354mm x 229mm complete all as specified and as directed. |
| 109 | Supply and fix in repairs sink stainless steel 1mm thick made in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 510mm x 430mm bowl size 430mm x 380mm x 203mm complete all as specified and as directed. |
| 110 | Supply and fix in repair of wall mixture CP cast copper alloy for 15 mm bore pipe with L-bend for overhead shower complete all as specified and as directed |
| 111 | Supply and fix in repair 15mm bore central hole Basin mixture for mixing hot and cold water chromium plated fancy type without popup waste system with 450mm long barided hoses complete all as specified and as directed.(Product Code & Make :- Cat Part No CON-167KNB of JAQUAR or equivalent model of KOHLAR/Roca) |
| 112 | Supply and fix in repair chromium plated toilet paper holder with flap complete all as specified and directed. (Product Code & Make :- Cat Part No. BA-38 of Make Prayag or equivalent model of other makes listed in list of makes).ll. |
| 113 | Supply and fix in repair corner glass self of size 300mm radius (with brass chromium plated brackets) fixed in the walls with necessary screws etc. complete all as specified and as directed |
| 114 | Supply and fix in repair stop valves or two way angle cocks, cast copper alloy concealed type reduced Body with Adjustable Wall Flange screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all as specified and as directed |
| 115 | Supply and fix in repair 2 way Bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed. |
| 116 | Supply and fix in repairs chromium plated sink mixer two in one system for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 117 | Supply and fix in repair stop valves or two way angle cocks, cast copper alloy concealed type reduced Body with Adjustable Wall Flange screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all as specified and as directed |
| 118 | Supply and fix in repairs chromium plated soap dish fixed to walls with brass screws complete all as specified and as directed. |
| 119 | Supply and fix in repair 15 mm angle stop valve cast (male or female thread) copper alloy chromium plated fancy type with capstan head, wall flange screwed down screwed for iron pipe complete all as specified and as directed. |
| 120 | Supply and fix in repairs stainless steel 0.85 mm thick kitchen rack size 914mmX914mmX254mm complete all as specified and as directed. |
| 121 | Supply and fix in repair cabinet mirror 400 x 500 mm size rectangular shape with 4 mm thick selected quality mirror and PTMT frame with openable door shutter with acrylic frame outside mirror as framed complete all as specified and as directed. |
| 122 | Supply and fix in repairs CP brass overhead shower 80mm dia round shape and and including CP brass shower arm 240mm long with wall flange complete all specified and directed. |
| 123 | Supply and fix in repairs 25 mm dia stainless steel tublar curtain rods minimum 0.5 mm thick including fancy type with fixing brackets, stops, rollers etc. complete all as specified and as directed. |
| 124 | Supply hoisting and fix 500 ltrs rotational moulded polythene water storage water tanks two layered construction ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I duly ISI Marked, 20mm GI light grade over flow pipe approx length 1.5m long, 20mm GI medium grade pipe for wash out approx length 2.00 m duly plugged at one end shall be provided including dismantling the existing tank complete all as specified. |
| 125 | Supply hoisting and fix 1000 ltrs rotational moulded polythene water storage water tanks two layered construction ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I duly ISI Marked, 20mm GI light grade over flow pipe approx length 1.5m long, 20mm GI medium grade pipe for wash out approx length 2.00 m duly plugged at one end shall be provided including dismantling the existing tank complete all as specified. |
| 126 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed |
| 127 | Material and labour for Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FR-LSH grade cable conforming to IS-694 1990 drawn in and including PVC Casing and Caping with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and as directed |
| 128 | All as per item No 127 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables complete all as specified and as directed |
| 129 | All as per item No 127 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board complete all as specified and as directed |
| 130 | All as per item serial No 127 here-in-before but for One 3 pin 5 Amp socket outlet on same board with other switches complete all as specified and as directed |
| 131 | All as per item No 127 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as specified and as directed |
| 132 | Material and labour for Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FR-LSH grade cable conforming to IS-694 1990 drawn in and including PVC Conduit conclead with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and as directed |
| 133 | All as per item No 132 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables complete all as specified and as directed |
| 134 | All as per item No 132 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board complete all as specified and as directed |
| 135 | All as per item serial No 132 here-in-before but for One 3 pin 5 Amp socket outlet on same board with other switches complete all as specified and as directed |
| 136 | All as per item No 132 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as specified and as directed |
| 137 | All as per item No 133 here-in-before but wiring with 4 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 4 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as specified and as directed |
| 138 | Supply and fix switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed |
| 139 | Supply and fix Bell push switch, flush type, 5 Amps 230 volt complete all as specified and as directed |
| 140 | Supply and fix socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and as directed |
| 141 | Supply and fix switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and as directed |
| 142 | Supply and fix switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and as directed |
| 143 | Supply and fix ceiling rose surface bakelite 65x50mm three terminal complete all as specified and as directed |
| 144 | Supply and fix lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as specified and as directed |
| 145 | Supply and fix stepped type electronic fan regulator, two module size, flush type complete all as specified and as directed |
| 146 | Supply and fix Ding Dong AC. 230 volts,single pole complete all as specified and as directed |
| 147 | Supply and fix in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V complete all as directed. |
| 148 | Material and labour for wiring with 2 runs of 1.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 1.5 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 run of 1.5 Sqmm cable and 1 run of 1.5 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 149 | Material and labour for Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 150 | Material and labour for Sub main wiring with 2 runs of 6.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 151 | Supply and fixing in repair batten type LED light fitting 1x 20W, 220V,AC decorative type including flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 152 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 153 | Supply and fix in repairs/replacement wall mounted decorative luminaire in design mesh suitable for 10W LED lamp B22 base ,including lamp of 10watt complete all as specified and directed. |
| 154 | Supply and fix in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 155 | Material and labour for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m deep below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth lead wire 4 mm dia or 8 SWG bolted (with GI nuts, bolts & check nuts) and earth plate electrode at one end and connected to main switch board/ DBs etc. at the other, earth strip encased(protected) in and including 15 mm bore GI pipe medium grade with all fittings from top of electrode to main switch board/ DBs etc fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-2 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work including taking down complete all as specified and shown in electrical plate No 3 of SSR Pt-I. |
| 156 | Supply and fix in repair/replacement of unsv switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and directed. |
| 157 | Supply and fix in repair/replacement of unsv switch flush type 15 Amp single pole one way complete all as specified and directed. |
| 158 | Supply and fix in repair/ replacement of unsv socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and directed. |
| 159 | Supply and fix in repair/replacement of unsv switch socket combination outlet 2-in-1, 5 Amp flush type complete all as specified and directed. |
| 160 | Supply and fix in repair/ replacement of unsvr switch socket combination multipurpose, 2 in 1, 3 pin, 5 & 15 Amp flush typecomplete all as specified and directed. |
| 161 | Supply and fix in repair/ replacement of unsv socket outlet 3 Pin 15 Amp 240 volts complete all as specified and directed. |
| 162 | Supply and fix in repair/replacement of unsv ceiling rose surface bakelite 65x50mm three terminal complete all as specified and directed. |
| 163 | Supply and fix in repair/replacement of unsv lamp holder insulated PVC/Polycarbonate/bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as specified and directed. |
| 164 | Supply and fix in repair/replacement of unsv stepped type electronic fan regulator, flush type complete all as specified and directed. |
| 165 | Supply and fix in repair/ replacement of unsv fan capcitor 2.5 Mfd suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed. |
| 166 | Supply and fix in repair/replacement for factory made, sheet steel distribution boards, TPN, 4 Way, IP-43 double door,with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed. |
| 167 | Supply fix in repair/replacement MCB DB of sheet metal enclosure IP-43 double door SPN 8 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed. |
| 168 | Supply fix in repair/replacement MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate.complete all as specified and directed. |
| 169 | Supply and fix in repair/replacement MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed. |
| 170 | Supply and fix in repair/replacement MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed. |
| 171 | Supply and fix in repair/replacement MCB Tripple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified. complete all as specified and directed. |
| 172 | Supply and fix in repair for MCCBs 415 V, 16 KA, 4P, 63 Amps complete all as specified and directed. |
| 173 | Supply and fix in repair for MCCBs 415 V, 16 KA, 4P, 100 Amps complete all as specified and directed. |
| 174 | Supply and fix in repair modular fan regulator,120 W, 2 module complete all as specified and directed. |
| 175 | Supply and fix in repair modular switch 1 way 6 amp, 1 module complete all as specified and directed. |
| 176 | Supply and fix in repair modular switch 1 way 16 amp, 1 module complete all as specified and directed. |
| 177 | Supply and fix in repair modular switch 2 way 6 amp, 1 module complete all as specified and directed. |
| 178 | Supply and fix in repair modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and directed. |
| 179 | Supply and fix in repair modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and directed. |
| 180 | Supply and fix in repair modular Bell push 6A, 1 module complete all as specified and directed. |
| 181 | Supply and fix in repair modular white cover plate with frame, 1 module complete all as specified and directed. |
| 182 | Supply and fix in repair modular white cover plate with frame, 2 module complete all as specified and directed. |
| 183 | Supply and fix in repair modular white cover plate with frame, 3 module complete all as specified and directed. |
| 184 | Supply and fix in repair modular white cover plate with frame, 4 module complete all as specified and directed. |
| 185 | Supply and fix in repair modular white cover plate with frame, 6 module complete all as specified and directed. |
| 186 | Supply and fix in repair modular white cover plate with frame, 8 module complete all as specified and directed. |
| 187 | Supply and fix in repair metal flush box 1/2 module for modular switches complete all as specified and directed. |
| 188 | Supply and fix in repair metal flush box 3 module for modular switches complete all as specified and directed. |
| 189 | Supply and fix in repair metal flush box 4 module for modular switches complete all as specified and directed. |
| 190 | Supply and fix in repair metal flush box 6 module for modular switches complete all as specified and directed. |
| 191 | Supply and fix in repair metal flush box 8 module for modular switches complete all as specified and directed. |
| 192 | Supply and fix in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 193 | Supply and fixing in repairs round shape 15 watt 220 volts AC surface/ recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 194 | Supply and fix in repairs 18 watt LED recessed/surface mounted luminaire with high brightness LED for glare-free homogenous illumination suitable for Armstrong/grid ceiling and fixture size complete all as specified and directed. |
| 195 | Supply and fix in repair/replacement LED 40/45 W post top made in cast aluminium with decorative opal polycarbonate diffuser with IP 65 protection suitable for dia upto 60mm complete all as specified and directed. |
| 196 | Supply and fixing and testing of Antique bollard light upto 20W, 230 volts or nearest size with die cast aluminium lighting with high power LED with B22 holder as light source body , IP-65, with all necessary fixing arrangments, exacavation work ,PCC work and earth work etc complete all as specified and directed. |
| 197 | Supply and fix in repair/replacement LED post Light with B22 holder up to 20 w bulb with white cover diffuser including plastic base plate suitable complete all as specified and directed. |
| 198 | Supply and fixing in repair LED building security light of capacity 60 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have luminaire efficacy ≥110 lumens/watt,CRI>70 ,PF > 0.95,CCT=5700±300,IP66,impact resistance IK 07 ,inbuilt protection against lightning , over voltage , short circuit and surge/spike protection upto 10kV including connection with PVC insulaed PVC sheathed, multistranded copper conductor cable of size 1.5 sqmmX 3 core from light fitting to ceiling rose complete all as specified and directed. |
| 199 | Material and labour for GI bracket made out of 40 mm bore light grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape all as directed, length of GI Pipe shall not be less than 1.5 metre for fixing of light fittings including taking out old bracket complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender