Tender For Special Repair Replacement Of Unserviceable Security Lights Feeder Pillar Electric Cables And Connected Items At 106 Fd Wksp Coy Under Ge 859 Ews
Tender Value
23.78 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
19 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tawang → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Replacement Of Unserviceable Security Lights Feeder Pillar Electric Cables And Connected Items At 106 Fd Wksp Coy Under Ge 859 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Supply and Laying and connecting with appropriate lugs in replacement XLPE LT cable PVC insulated, heavy duty electric cables with Aluminum conductors,1100 volts grade, laid in trenches/on pole/in pipe /on wall ,using suitable clamps for fixing of cable complete all as specified and directed of following cross-sectional area including removing/ taking down of old unserviceable cables :-6 Sqmm 2 Core |
| 2 | 10 Sqmm 2 Core |
| 3 | 16 Sqmm 2 Core |
| 4 | 35 Sqmm 3.5 Core |
| 5 | 50 Sqmm 3.5 Core |
| 6 | 70 Sqmm 3.5 Core |
| 7 | 120 Sqmm 3.5 Core |
| 8 | Excavation in trenches, n exc 1.5m wide and m exc 1.5m in depth, for foundation, etc or for shafts, wells, cess-pits, menholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out for soft/loose soil. |
| 9 | Returning, filling in, including spreading, levelling, waterring and wall ramming in layers not exc 25 cm. for hard/dense soil. |
| 10 | Removing excavated material n exc. 50 m and depositing where directed at a layers not exc 25 cm. for hard/dense soil. |
| 11 | S&F Double walled corrugated (DWC) Pipe conforming to IS 14930(Part-II) Pipes of Outer dia 63 mm and innder dia 50mm all as specified and as directed. |
| 12 | M&L for Demolition and dismantling Concrete of any description and in any position not otherwise specifically provided for unreinforced Cement concreteconcrete. |
| 13 | M&L for making good surface with PCC 1:3:6 B-2 Type Using 40 mm graded stone aggregate. |
| 14 | S&F in repair sheet metal enclosure double door for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door (Metallic) type including taking down old Distribution Board and MCBs all as specified and directed . |
| 15 | S&F in repair MCB SPN 40 Amps 240 volts 'C' series, 10 KA, 50 Hz. Make:- As approved Make of DB |
| 16 | S&F in repair MCB SP 5 to 32 Amps 240 volts 'C' series, 10 KA, 50 Hz including connection in the DB and testing/commissioning. Make:- As approved Make of DB |
| 17 | Supply, installation, commissioning including taking down old unsv panel and testing in replacement powder coated factory made out door type double door panel board confirming to IP 66 protaction, of suitable size made of Robust steel sheet construction made from min 3.15 mm steel sheet with countersunk holes at bottom for base mounting brackets and sheet steel gland plates for cable entry, formed gasket arround doors, with provision of Lock inserts, earthing straps, door stay and grouted in ground by using angle iron frame of size 50mm x 50mm x 6mm, pedastal type and provided with four nos of angle iron supports duly embedded in foundation using PCC (1:2:4) type C-1 with 20mm graded stone aggregate.The panel will be prewired with suitable size PVC insulated copper conductor cable, multistranded housed with the following accessories:- (a) Al bus bar of suitable capacity for phase and neutral.(b) Incoming MCCB 4 pole 250 Amp 36 KA alongwith Spreader terminals with adjustable thermal setting – 01 No(c) Out going MCCB 4 pole 200 Amp 25 KA alongwith Spreader terminals with adjustable thermal setting – 01 No(d) Out going MCCB 4 pole 125 Amp 25 KA alongwith Spreader terminals with adjustable thermal setting – 02 Nos(e) Digital volt meter 0 to 500 volt with selector switch – 01 No() Digital Amp meter 0 to 500 Amp with CT of suitable ratio and selector switch – 01 No |
| 18 | Supply, installation, commissioning including taking down old unsv panel and testing in replacement powder coated factory made out door type double door Feeder panel board confirming to IP 66 protaction, of suitable size made of Robust steel sheet construction made from min 3.15 mm steel sheet with countersunk holes at bottom for base mounting brackets and sheet steel gland plates for cable entry, formed gasket arround doors, with provision of Lock inserts, earthing straps, door stay and grouted in ground by using angle iron frame of size 50mm x 50mm x 6mm, pedastal type and provided with four nos of angle iron supports duly embedded in foundation using PCC (1:2:4) type C-1 with 20mm graded stone aggregate.The panel will be prewired with suitable size PVC insulated copper conductor cable, multistranded housed with the following accessories:- (a) Al bus bar of suitable capacity for phase and neutral.(b) Incoming MCCB 4 pole 125 Amp 25 KA alongwith Spreader terminals with adjustable thermal setting – 01 No(c) Out going MCCB 4 pole 100 Amp 16 KA alongwith Spreader terminals with adjustable thermal setting – 01 No(d) Digital Voltmeter, Ammeter, LED indicator Lamps, CT etc. |
| 19 | M&L for earthing complete with galvanised steel earth plate electrode 60cmX60cmX6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level)with top edge of the plate not less than 1.5 metres below normal groundlevel, connected to galvanised earth lead strip 32x6mm by means of volts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 of SSR Part-I connected to earthing test point all as specified or indicated including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15 mm bore GI medium grade earth lead protection pipe, 50 mm thick RCC 1:2:4 type B-1 cover slab of earth pit reinforced with 8 mm dia TMT bars @ 10 cm C/C both ways and with handle made out of 10 mm dia bars, funnel, strainer,charcoal and testing on completion all as specified and directed.. |
| 20 | Supply and fix in repair LED street light fitting 70 watt energy saving and enviromental friendly long liife made up of pressure die cast aluminium housing with high power LED as lightnig source and lens embedded PC cover/ toughened glass having top opening seprate driver compartment with IP 66 protection and impact resistance of IK07 with 10 KV built in surge protection device suitable for pole dia 54 mm (max) including taking down existing fitting of any type and in any position complete all as directed. Make: Havells Catpart No Havells (ENDURASUNDOWNSL70WLED765PASYBOTG) or equivalent in Philips, & Wipro |
| 21 | Material and Labour for painting of 7/8/9 meter long steel street light pole complete with one coat of synthetic enamel aluminium paint and preparation of surface including writing of pole Nos with black enamelled paint not less than 100mm height complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender