Tender For Repair/Maint Of Area Drainge At Central Zone Under Ge (North) Binnaguri
Tender Value
40 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
4 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Area Drainge At Central Zone Under Ge (North) Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames)complete all as specified and as directed. |
| 2 | Taking down Chowkhats or frames exc 1.5 sqm and not 4.00 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 3 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm & Refixing in same opening complete all as specified and as directed |
| 4 | Taking down shutters of any description n.exc 1 Sqm each complete all as specified and as directed |
| 5 | Taking down shutters of any descriptiont exc1 Sqm but n. exc 2 Sqm each complete all as specified and as directed |
| 6 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening as specified in SSR Part I, Section 8 complete all as specified and as directed. |
| 7 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing specified in SSR Part I, Section 8 with Wood free EPS complete all as specified and as directed |
| 8 | S&F 1.25mm thick pressed steel frame of size 105x60 mm thick for doors with one or more rebates including necessary fixing lugs hinges, lock strikes plates etc complete all as specified and as directed. |
| 9 | S&F 1.25mm thick pressed steel frame of size 125x60 mm thick for doors with one or more rebates including necessary fixing lugs hinges, lock strikes plates etc complete all as specified and as directed. |
| 10 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprisin of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and as directed.[Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made]. |
| 11 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 125 mm comprisin of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and as directed. [Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made]. |
| 12 | S&F 30mm thick factory made Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 13 | S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(a), complete all as specified and as directed. |
| 14 | S& F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required. size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 15 | S&F of Factory made partly glazed ie. upper panel will be wire mesh fitted externaly in the clear space & lower panel will be plain colour PVC sheet 5mm thick PVC door shutter 30mm thick (style ) consisting of frame made out of M.S tubes for top & bottom , rails , MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for sides and plain colour PVC sheets for botop rail , lock rail rail & bottom rail on either side & as gap insert for top rail & bottom rail , paneling of plain colour PVC sheet PVC sheet beading , and jointed together with solvent cement ,complete all as specified and as directed. (Note: stainless steel butt hinges and necessary fittings shall be paid separately) |
| 16 | S&F as in repair for powder cated aluminium door shutters of any colour (Powder coating not less than 50 micron), aluminium section weighting 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed. |
| 17 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventialtors and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws, all complete as per the directions of Engineer-in-Charge. |
| 18 | S&F factory made steel windows of side hungs including projecting type hinges with steel handle, and steel peg stay, complete with glazed bars, devetailed etc complete all as specified and as directed |
| 19 | S&F factory made steel windows of side hungs including projecting type hinges with steel handle , and steel peg stay , complete but withot glazed bars, devetailed etc complete all as specified and as directed |
| 20 | Supply and fixing Factory made single uPVC white colour Three track panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels ) upto 1.50m height made of ( big series ) frame 116x45 mm & sash 46x62mm both having wall thickness of 2.3mm + 0.2mm and single glazing bead / double glazing bead of appropriate dimension . (area of window above 1.75 sqm ) comprising of uPVC multichambered frame , with inbuilt roller track and sash extruded profiles duly reinforced with 1,60+0.20mm thick galvanised mild steel section made from roll forming process of required length ( shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks , EPDM gasket , wool pile zinc alloy ( white powder coated ) touch locks with hook , zinc alloy body with single nylon rollers ( weight bearing capacity to be 40 kg ) , GI fasteners 100x8mm size for fixing frame to finished wall and necesarry stainless screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of after fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality , complete all as specified and asdirected Note:-(i) Labour charges for fixing of glass/wire guage is inclusive in the unit rate quoted. Glass/Wire Guage shall be measured and paid seperately at supply only rates (ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e , in depth & width of profile shall be accepted but no extra payment on this account shall be made.) |
| 21 | S&F in repairs powder coated(minimum thickness of powder coating 50 micron) aluminium window sliding type three track (one gauge and two glazed shutter) aluminium sections weighing not less than 0.55 Kg per mtr for shutter and aluminium sections weighing not less than 1.67 Kg per mtr for frame including necessary jointing cleats, glazing cleats, rubber packing, screws, handle, locking arrangement etc complete and 4 mm thick tinted glass and stainless steel mosquito proof wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm including taking down of old existing window and making good disturbed surface of wall complete all as specified and as directed. |
| 22 | S&F in repairs of anodised aluminium louvered ventilators of any size with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and with including 4mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing ventilator and making good disturbed surface of wall complete all as specified and as directed. |
| 23 | S&F in repairs steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed. |
| 24 | Supply only sheet glass 4 mm thick ordinary quality in squares exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 25 | Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ,complete all as specified and as directed. |
| 26 | S&F 150 mm long stainless steel tower bolts of extruded section and fixed complete all as specified and as directed . |
| 27 | S&F stainless steel grade 304, sliding door bolt 300 mm long decorative (ISI marked) with bright bolt not less than 12 mm dia with and including minimum of 6 bolt and nuts, 4 on bolt plate and 2 on staple fixing complete all as specified and as directed. |
| 28 | S&F 100 mm long stainless steel hinges(medium weight) completeall as specified and as directed. |
| 29 | Supply & fixing stainless steel type handle 150mm long complete all as specified and as directed. |
| 30 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 31 | M&L preparation of surfaces of wood or wood based material of any description not otherwise described over 10 cm width or girth new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 32 | M&L in repairs block board 18-19 mm thick grade IInd quality interior grade commercial type fixed with screw to timber frame work for kitchen cup board complete all as specified and as directed. |
| 33 | M&L 2nd class hard wood plain fillets exc 13 Sq cm & n.exc 25 Sqcm square rectangular or triangular in section clean sawn ,wrought finish secured with nails or brads complete all as specified and as directed. |
| 34 | S&F 75 mm long stainless steel hinges (medium weight) completeall as specified and as directed |
| 35 | S&F 75 mm size hasp and staple safety type aluminum anodized with mild steel hinge ping including bolt to hinge plate and fixed with screw complete all as specified and as directed. |
| 36 | S&F 100 mm Stainless steel fancy handles cast type anodised complete all as specified and as directed. |
| 37 | S&F 100 mm long Stainless steel barrel tower bolts complete all as specified and as directed. |
| 38 | S&F in repairs floor door stopper of Aluminium alloy body and tongue with hard drawn steel spring fixed to door (Overall length of cover plate140 mm long) complete all as specified and as directed. |
| 39 | S&F in repairs door closer aluminum (die cast body) hydraulically regulated design No 3 universal type suitable for door shutter 851 to 100 mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |
| 40 | S&F in repairs 75mm Mortice lock latch with two levers ( Vertical type ), mild steel body and fixed complete all as specified and as directed. |
| 41 | M&L preparation of new surface of steel any description over 10 cm in width or girth not otherwise described two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed. |
| 42 | S&F framed work such as grating/grills etc with end of bars shouldered and riveted or forged into spikes framed guards bars and smilar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. |
| 43 | S&F in repairs steel rolling shutter without ball bearing as specified including top cover, anchoring rod, hasp & staple and one shop coat of primer erected in position as indicated complete push pull or manual type (thickness of lath 1 mm) complete all as specified and as directed. |
| 44 | Taking down & refixing rolling shutter after repair complete all as specified and as directed. |
| 45 | S&F in repairs safety lever mild steel with 4 levers for rolling shutters complete all as specified and as directed. |
| 46 | S&F in repairs ball bearing for rolling shutters complete all as specified and as directed. |
| 47 | S&F double action floor spring hydraulically regualted made up of minimum 1.25 mm thick aluminium sheet foundation box, main body with stainless steel cover, govererning pivot made of brass, other parts made of mild steel heavy duty ISI marked complete all as specified and directed. |
| 48 | Hacking out old broken glass (any thickness,size,or description) from wooden/steel frames or glazed with putty or fixed with wooden beads complete all as specified and as directed.. |
| 49 | S&F in 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 50 | S&F in 3 mm thick figured glass pin headed and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 51 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 52 | M&L PCC 1:2:4 type B1 (using 12.5 mm graded aggregate as in filling of steel door frame,bed block for hold fast etc. complete.all as specified and as directed |
| 53 | Dismantling of Asbestos cement sheet etc. complete all as specified and as directed |
| 54 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 55 | S&F steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed. |
| 56 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 57 | M & L for providing & fixing factory made solid PVC cup board frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5 mm thick prelam/plain colour PVC sheet reinforce with 19mm x 19mm MS square tube of 19 gauge thickness throughout the frame and metre cut at two corners and jointed with 2 nos of 150mm long brackets of 15mm x 15mm MS square tubes.The door frame shall be fixed to the wall using 100mm long MS screws through the frame by using PVC fasteners. A minium 4 nos of screws to be provided for each vertical memberand minium 2 nos of screws to be provided to the horizontal mmember etc.complete all as specified and as directed |
| 58 | M & L for providing & fixing factory made solid PVC cup board shutter (Flush type) of 24 mm thick made from co-extruded 3 layer regid PVC foam sheet (single extruded) with density not less than 600kg/cbm outer layer (.8-1mm) thick should be of rigid PVC with density of not less than 1400kg/cbm manufactured byan ISO 9001-2015 certfied company. Door should be water proof, turmite proof, fire retardant and having good screw holding capacity complete all as specified and as directed. |
| 59 | M&L in repairs for factory made PVC shelf/partitation of required size consisting of 20mm thick solid PVC sandwich with 1mm thick plain PVC sheet on both sides suitably fixed in complete all as specified and as directed |
| 60 | S&F as in repair for 10mm thick wooden fillets/ beading of width 35mm for glass beading etc inclusive of fixing on to wall to make glass Frame as per specification and drawing .Note:- Design and pattern/colour shall be approved by Engr-in-charge /GE at the time of execution of work. complete all as specified and as directed |
| 61 | Supply and fixed in repair stainless steel curtain rod 20 mm dia, mild steel chromium plated with fixing brackets, stops,rollers etc. complete all as specified and as directed. |
| 62 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.complete all as specified and as directed |
| 63 | M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.including 20mm thick backing layer in cement mortar 1:6 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including dismantling unserviceable stone slab/tiles of any description or thickness, laid bedded and pointed in any cement mortor complete all as specified and as directed. |
| 64 | M&L for providing edge moulding to 18-20mm thick granite (of any type) stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 65 | M&L for providing edge moulding to 18-20mm thick granite (of any type) stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender