Tender For special Repair To Joinery Of Adm Block Of Inf Bn P-94 At Si Lines Under Ge Bhopal
Tender Value
47.56 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
3 days left
EMD
95120
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Joinery Of Adm Block Of Inf Bn P-94 At Si Lines Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Taking down chowkhats or frame but with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed. |
| 3 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4.0 sqm each complete all as specified and directed. |
| 4 | S&F of Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. |
| 5 | S&F of Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. |
| 6 | S&F to Factory made single extruded WPC (Wood Polymer Composite) solid plain flush shutter door of 35 mm size open rebated and prepared to receive gauze, etc.(without sash bars) edge of framing plain, chamfered or rounded, etc; size of members of shutters comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note : Wiremesh Shall be measured and paid separetely). |
| 7 | S&F to Factory made single extruded WPC (Wood Polymer Composite) solid plain Glazed shutter door of 35 mm size open rebated and prepared to receive gauze, etc.(without sash bars) edge of framing plain, chamfered or rounded, etc; size of members of shutters comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note : Wiremesh Shall be measured and paid separetely. |
| 8 | M&L for cement concrete type B0 1:2:4 using 12.5mm graded stone aggregate as in filling of door frame as in jamb for fixing of holdfast and like etc complete all as specifed and directed |
| 9 | Supply and fix Stainless steel wire clothes 0.36 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and as directed. |
| 10 | S & F stainless steel 100mm size Butt hinges, medium weight cold rolled, and fixed complete all as specified and as directed. |
| 11 | S&F 150 mm Stainless steel handle , cast type, polished bright complete all as specified and directed by Engr-in-Charge |
| 12 | S&F Stainless Steel sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 200mm long, plate type, complete all as specified and directed. |
| 13 | S&F Stainless steel tower bolts of extruded section of size 200mm complete all as specified and directed. |
| 14 | S&F 140mm long, double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed. |
| 15 | S&F Door closer aluminium (extruded section body) hydraulically regulated, designation No. 2 universal type, suitable for door shutters up to 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 16 | S & F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area exceeding 2.00 sqm each window complete all as specified and directed |
| 17 | S & F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area not exceeding 2.00 sqm each window complete all as specified and directed |
| 18 | S&F Toughned glass of 8-10mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required |
| 19 | S&F 10 to 12mm thick toughened glass in door, partitions etc similar work etc with stainless steel handle, locking arrangement and with hinges in approved shape and design complete all as specified and directed by Engr-in-Charge. |
| 20 | S&F heavy weight stainless steel hydraulic patch fittings for single leaf having single bolt and single strock of minimum size 190 mm x 70 x 40 mm complete all as specified and as directed. |
| 21 | S&F Double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to toughened glass door complete all as specified and as directed. |
| 22 | S&F stainless steel heavy duty D-shaped patch lock and strike plated two set of keys suitable for double shutter door to be operated from both sides fixed to 12 mm thick glass door complete all as specified and as directed. |
| 23 | S&F heavy duty stainless steel (grade 304) H shaped handles 300 mm long fixed to toughened glass door with one pair of collar and screws complete all as specified and as directed. |
| 24 | S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 25 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame/shutters for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 including necessary locks handle, rubber gasket for glass/ wire mesh fixing complete all as specified and directed |
| 26 | S&F 4 mm thick frosted sheet glass in square n exc 0.5 SqM each pane complete all as specified and direcetd.. |
| 27 | S&F 4 mm thick frosted sheet glass in square exc 0.5 SqM each pane complete all as specified and direcetd.. |
| 28 | M&L for 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms with rounding of edges and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed. |
| 29 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing outside MD land complete all as specified and directed. |
| 30 | M&L for 25mm thick in PCC 1:2:4 type B0 using (using 12.5mm stone aggregate) as in bedding layer for laying in floor as in levelling course complete all as specified and directed. |
| 31 | M&L for premium double charge matte finish vitrified tiles 9-10mm thick (area of each tiles n exc 1.00 sqm each) in floors and skirting fixed with 3mm spacers set and jointed in neat cement slurry over and including screed bed 15mm in CM (1:6) and pointed with epoxy tile grout filling of approved make and color including dismantling of old tiling fixed in any mortar and position all as specified and directed. |
| 32 | S&F of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to openings complete all as specified and directed. |
| 33 | M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. |
| 34 | M&L for rendering 15 mm thick on other than fair face of brick work or concrete surfaces or brick masonry surfaces in CM 1:4 finished even and smooth without using extra cement including taking down old plaster from brick or concrete surface and raking out joints complete all as specified. |
| 35 | M&L for preparation of new plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion complete all as specified and directed. |
| 36 | Deduct Schedule of credit (calculation will be done off line) Rs. 119600.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender