Tender For Special Repair To Bldg No P-13 (Or Institute, Bldg No P-29 And P-30 (Cook Houses) Of Guards At Suratgarh Mil Stn Under Ge(A) Suratgarh
Tender Value
76.75 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
9 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-13 (Or Institute, Bldg No P-29 And P-30 (Cook Houses) Of Guards At Suratgarh Mil Stn Under Ge(A) Suratgarh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Aug-2026 | Corrigendum no. 1 | Other | 02-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (reinforced) in landing slab ,chullah hoods ,manhole covers , Roofs ,Floors, beams, stair case, landing, chajja and similar suspended work complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L for Vitrified ceramic tiles 8 to 9 mm thick 600x 1200 mm Double charged light shade polislhed area of each tiles exc 0.42 sqm and not exceeding 1.0 Sqm in floors set and jointed in neat cement slurry and with epoxy spacer coloured to match, 20mm thick screed bed or bedding layer CM 1:4 for laying finishes complete all as specified and as directed by Engineer-in-Charge. |
| 4 | All as per item No 3 hereinbefore but as in vertical surfaces such as skirting, dados & risers to steps etc over 10 mm thick backing plaster in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 5 | M&L for Glazed ceramic coloured tiles with highlighter in vertical surface 300x600x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in CM 1:4 on other than fair face of brick work complete all as specified and as directed by Engineer-in-Charge. |
| 6 | M&L for Joint less Non - skid Matt finish Vitrified tiles 395x 395 size 10 to 12 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 7 | All as per item No 6 hereinbefore but as in vertical surfaces such as skirting, dados & risers to steps etc over 10 mm thick backing plaster in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for Joint less Non - skid Ceramic tiles 395x 395 size 7 to 8 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Demolition of tiles or stone slabs of any description or thickness in floors laid, bedded and pointed in mortar and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L for Green Marble 18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of green marble including grinding and polishing complete including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 11 | M&L for Green Marble 18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of green marble including grinding and polishing complete including rendering 10 mm thick in CM(1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Taking down of chowkats or frames n.exc 1.5 Sqm each with shutters (without taking of shutters from the frames) complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5sqm but not exc 4 sqm each and removing from site complete all as specified and as directed by Engineer-in-Charge. |
| 14 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge. (Note : Size of rebate shall be as per door's shutter thickness or as directed by Engineer in charge.) |
| 15 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge. (Note : Size of rebate shall be as per door's shutter thickness or as directed by Engineer in charge.) |
| 16 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge including supply and fixing following items in each leaf/shutter :-(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.(b) Stainless steel (304 Grade) finished square tower bolt 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf. (d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia as per BIS clause (iii) of BIS 15834-2020. (e) Stainless steel (304 Grade) Finished Floor door stopper 140 mm -1 Nos per leaf. |
| 17 | S&F 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats including supply and fixing following items in each leaf/shutter :-(a) Stainless steel (304 Grade) finished retractable butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.(b) Stainless steel (304 Grade) finished square raised tower bolt 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf. (d) Stainless steel (304 Grade) Finished Floor door stopper 140 mm -1 Nos per leaf. |
| 18 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge. |
| 19 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 18 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge including supply and fixing of the following items :-(a) Stainless steel (304 Grade) finished Clip Hinges, soft close type 100 mm,2 Nos per leaf(b) Decorative type knobs for Cabinet -1 No per leaf(c) Magnetic Catcher for cabinet - 2 per leaf |
| 20 | S&F factory made single extruded WPC (Wood Polymer Composite) solid flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge including supply and fixing of the following items :-(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.(b) Stainless steel (304 Grade) finished square tower bolt 150 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.(c) Stainless steel (304 Grade) Finished Handles 100 mm-2 Nos per leaf. |
| 21 | Taking down steel window/ ventilator of any description and of any type with or without guard bars complete all as specified and as directed by Engineer-in-Charge. |
| 22 | S&F anodised powder coated Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and as directed by Engineer-in-Charge. |
| 23 | S&F anodised powder coated Aluminium window (glazed and gauzed both),side hung type without sash bars, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos), hinges type B-21 100mm long (02 Nos) suitable handle (01 No) with powder coating of any colour (thickness of powder coating not less than 50micron) etc including Galvanised mild steel wire cloth 0.56 mm nominal dia of wire or 5.5mm thick sheet glass complete all as specified and as directed by Engineer-in-Charge. |
| 24 | S&F Anodised powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engineer-in-Charge. |
| 25 | M&L for mild steel framed work of Fe-290 (Gde E-165) as in grills/guard bars shouldered with steel windows/ventilators frames. Cooler stand, ladder, barred iron doors; ladders; framed balusters; walkways; railings; etc then applying two coat of synthetic enamel paint (ordinary tint) over coat of primer on steel surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 26 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 27 | S&F in repair Stainless Steel curtain rod decorative pattern with brackets and wall to wall complete all as specified and as directed by Engineer-in-Charge. |
| 28 | S&F 300 mm Mild Steel ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed by Engr-in-charge. |
| 29 | S&F in repair aluminium (Die cast) body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80kg and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 30 | M&L for RCC M-25 (20mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engineer-in-Charge. |
| 31 | M&L for RCC M-25 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge. |
| 32 | M&L for RCC M-25 in Columns, pillars, piers, posts and struts complete all as specified and as directed by Engineer-in-Charge. |
| 33 | M&L for Form work to sides and soffits of floor or roof beam, beam, hauchings, girders, bressum-emers, lintels, cantilevers, shelves incl supports overhangs etc also splays between floors and beams, flat, rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge. |
| 34 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed by Engineer-in-Charge. |
| 35 | M&L for Formwork to soffits of sides of pillars, posts, struts, piers,columns and stanchions complete all as specified and as directed by Engineer-in-Charge. |
| 36 | S&F MS TMT Bars of 10 mm dia and over,cut to length,bent to shape required including cranking, binding spirally for hooping for columns hooking ends and biniding with and including MS wire (annealed) not less than 0.9 mm dia or securining with clip complete all as specified and as directed by Engineer-in-Charge. |
| 37 | S&F MS TMT Bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders,cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and biniding with and including MS wire annealed not less than 0.9 mm dia or securining with clip complete all as specified and as directed by Engineer-in-Charge. |
| 38 | M&L for applying cement mortar 1:3 over a coat of neat cement slurry @ 3kg/sqm and one coat of bonding agent as per manufacturers specifications complete all as specified and as directed by Engineer-in-Charge. |
| 39 | M&L for a micro concrete mixed and poured as per manufacturer specifications of thickness 40-50mm as required complete all as specified and as directed by Engineer-in-Charge. |
| 40 | M&L welding in repairs n exc 2.5 cm in length on steel surfaces of n.exc 6mm thickness of metal complete all as specified and as directed by Engineer-in-Charge. |
| 41 | Demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-Charge. |
| 42 | M&L for brick work with fly ash bricks (old size bricks) straight or curved on plan exceeding 6m mean radius with old size bricks in wall built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge. |
| 43 | All as item No 42 hereinbefore but using using old serviceable bricks retreived from item No 41 hereinbefore including cleaning of mortar from old bricks complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Taking down cement plaster from brick walls/ ceiling or concrete of any description,racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge. |
| 45 | M&L for Rendering 10 mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 46 | M&L for Rendering 15 mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement but including liquid water proofing compound as per manufacturers instruction complete all as specified and as directed by Engineer-in-Charge. (WPC shall be paid separetely) |
| 47 | M&L for Rendering 5 mm thick in cement plaster 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 48 | Supply only Integral Water proofing compound complete all as specified and as directed by Engineer-in-Charge. |
| 49 | M&L for Preparation of new ceiling surfaces plastered or unplastered and applying two coat of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 50 | M&L for preparation of newly plastered or unplastered surfaces of wall and applying three coat of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 51 | M&L for preparing newly plastered surfaces & applying two coats of oil emulsion distempering(OBD) over and including a coat of white wall care putty 3 mm thick over a coat of primer on walls complete all as specified and as directed by Engineer-in-Charge. |
| 52 | M&L for preparation of newly plastered surface of walls & Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including 1mm thick layer of exterior grade wall care putty complete all as specified and as directed by Engineer-in-Charge. |
| 53 | M&L for complete removal of exterior old decorated, plastered or pointed surfaces of wall by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, washing, rubbing down and stopping of distempered surface, filling of cracks etc and applying two coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre / 10 sqm and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed by Engineer-in-Charge. |
| 54 | M&L for Roof Treatment in as specified below and as directed :(i) Removal of existing PCC/Brick Bat Coba/Mud phuska/ APP membrane from the roof stacking the reusable material and disposal of unserviceable rubbish outside the campus as direction by Engineer-in-Charge but outside in 3 km.(ii) 15mm thick rendering in CM (1:4) over existing/ old RCC slab/ surfaces after dismantling/ demolishing/ taking down existing roof treatment.(iii) Cleaning of surface of loose dust, and dirt and cement slurry etc. by means of wire brush, dust removing brush and scraper etc. Pot Holes/ Cracks shall be repaired with cement admixed with polymer as per manufacturer instructions.(iv) Providing PCC coving/ gola along vertical parapets of size 75mm × 75mm with concrete mix (1:2:4), type B-1 using water proofing compound of approved make etc. complete as directed by engineer-in-charge.(v) The surface shall be treated with PU Elastoseal primer with Epoxy Primer to seal the pores and enhance the adhesion of the coating, supplying and applying single component waterproofing liquid membrane based on pure elastomeric polyurethane resin cold applied of spray/brush applied membrane with an elongation of 650% ± 50 and tensile strength not less than 2 MPa, crack bridging ability not less than 2mm. No leakage upto 5 bars of water pressure. Shore Hardness > 50 Shore. The minimum thickness to be applied shall be 1.5 mm (overall) in two layers (each layer 750 micron) or as per manufacturer’s instructions.(vi) Providing & laying of protective Geotextile fabric 150 GSM over the entire membrane with proper overlaps of 75mm.Note : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment . |
| 55 | Taking down unserviceable / rusted rolling shutter size n.exc 15 Sqm each and removing from site complete all as specified and as directed by Engineer-in-Charge. |
| 56 | S&F Steel rolling shutters, 1.25mm thick, with gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete including Ball Bearing and saftey Lever locks (2 nos in each shutter): push pull or manual type complete all as specified and as directed by Engineer-in-Charge. |
| 57 | S&F in repair vitreous china premium/1st quality wash down water closet wall hung (with dual hung cistern) EWC white/ivory/off white (closed pattern) including necessary accessories like rag bolts/ gel gasket etc including flushing cistern, CP jet spray complete all as specified Make Parryware verve AM C022N and C0762 or equivalent out of makes specified in list of makes complete all as specified and as directed by Engineer-in-Charge. |
| 58 | S&F in repair vitreous china wash basins, size 600 x 480 mm white flat back to be fixed on granite/marble & RCC slab including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings, waste pipe, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed. CERA SKU S2030115 or equivalent out of makes specified in list of makes complete all as specified and as directed by Engineer-in-Charge. |
| 59 | S&F in repair vitreous china urinal 570x390x355 mm ,half stall type , white,waste coupling of PTMT, with automatic flushing censor, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar, including connections to flushing pipe and outgoing pipes complete all as specified and as directed by Engineer-in-Charge. |
| 60 | S&F 32 mm Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Taking up or down 20 mm bore steel tubing and connection including cleaning for refixing or removal complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Supplying and laying of 20 mm (Outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-Charge. |
| 64 | Supply, fixing and testing of 25 mm (Outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-charge. |
| 65 | S&F of 20 mm (OD) CPVC Brass Elbow fittings complete all as specified and as directed by Engineer-in-Charge. |
| 66 | S&F of 20 mm CPVC Brass Male Brass Threaded Adaptor (MTA/ MBTA) fittings complete all as specified and as directed by Engineer-in-Charge. |
| 67 | S&F in repair Rotational moulded polyethylene water storage tanks white colour in tripple layers (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I (1000 Ltrs Capacity) including Ball brass valves 20 mm bore, high pressure,with polythene float & flynut complete, including Dismantling old water tanks complete all as specified and as directed by Engineer-in-Charge. |
| 68 | S&F in repair Rotational moulded polyethylene water storage tanks white colour in tripple layers (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I (500 Ltrs Capacity) including Ball brass valves 20 mm bore, high pressure,with polythene float & flynut complete, including Dismantling old water tanks complete all as specified and as directed by Engineer-in-Charge. |
| 69 | S&F in repair 15mm bore fancy type chromium plated, long body bib tap with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-Charge. |
| 70 | S&F in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge. |
| 71 | S & F in repair 15 mm bore fancy type chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 72 | S&F in repair 15 mm bore stop valve cast copper alloy fancy type chromium plated concealed , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 15 mm dia, ISI marked complete all as specified and as directed by Engineer-in-Charge. |
| 73 | S&F in repair 20 mm dia CPVC ball valve fixed complete all as specified and as directed by Engineer-in-Charge. |
| 74 | S&F in repair 600mmx 450 m bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge. |
| 75 | S&F 15mm bore, 450mm long PVC connection with PTMT nuts at each end complete all as specified and as directed by Engineer-in-Charge. |
| 76 | S&F grating doom SS Floor Drainer square/rectangular/circular with Collar and Cockroach Trap/Jali CP with/withput waste hole complete all as specified and as directed by Engineer-in-Charge. |
| 77 | S&F in repair CP Brass Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engineer-in-Charge. |
| 78 | S & F tubular towel rail brass chromium plated 20 mm dia and 60 cm long complete all as specified and as directed by Engineer-in-Charge. |
| 79 | Dismantling 100mm bore cast iron drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed by Engineer-in-Charge. |
| 80 | Dismantling 75 mm bore cast iron drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed by Engineer-in-Charge. |
| 81 | Taking down eaves gutters and rain water pipe (any size or any pattern) including all fittings, heads, shoes, bends, swan necks etc (measured over all as fixed along the central line over fittings and accessories) complete all as specified and as directed by Engineer-in-Charge. |
| 82 | Supply & fixing 110mm bore PVC pipes grade 'B' single socketed in any length with rubber ring joints, fixed along walls with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, joints fixed with pipe joint lubricant including bends, socket , Y junction, Tee , cowl etc complete all as specified and as directed by Engineer-in- charge complete including low carbon hot roll gauge corrected oil pickled & drawn pipe supporting clamping system 32x3mm with rib and notch are hot dip galvanised and Zn, Al flake coating with necessary clamps to fix and hold pipe complete all as specified and as directed by Engineer-in-Charge. (Note: Detail of Pipe supporting system is all as per Drg NO -BTD-916). |
| 83 | Supply & fixing 110mm bore PVC pipes grade 'B' single socketed in any length with rubber ring joints, fixed along tranches complete all as specified and as directed by Engineer-in-Charge. |
| 84 | Supply and fixing PVC (SWR) bends any radius bore 110 mm provided with access door complete all as specified and as directed by Engineer-in-Charge. |
| 85 | Supply and fixing PVC (SWR) bends any radius bore 110 mm complete all as specified and as directed by Engineer-in-Charge. |
| 86 | Supply & fixing 75mm bore PVC pipes grade 'B' single socketed in any length with rubber ring joints, laid in trenches complete all as specified and as directed by Engineer-in-Charge. |
| 87 | Supply and fixing PVC (SWR) bends any radius bore 75 mm provided with access door complete all as specified and as directed by Engineer-in-Charge. |
| 88 | Supply and fixing in repairs PVC (SWR) junction single, (Single T) equal or unequal bore 75 mm provided with access door complete all as specified and as directed by Engineer-in-Charge. |
| 89 | Supply and fixing in repairs PVC (SWR) reducers 110 mm to 75 mm complete all as specified and as directed by Engineer-in-Charge. |
| 90 | Supply and fixing in repairs PVC (SWR) vent cowl bore 75 mm complete all as specified and as directed by Engineer-in-Charge. |
| 91 | S&F PVC (SWR)75 mm floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge. |
| 92 | Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) complete all as specified and as directed by Engineer-in-Charge. |
| 93 | M & L for 50mm thick PCC 1:3:6 type B-1, using 20mm graded stone aggregate as in plinth protection, laid in slope in 1:30 in pannels n. exc. 2m long, concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 94 | M&L for 75 mm thick cement concrete type C2, (1:3:6) using 40mm stone aggregate as in sub base complete all as specified and as directed by Engineer-in-Charge. |
| 95 | M&L for sand filliing under floors in layers foundations including watering and consolidation n exc. 25 cm thick including watering and consolidation complete all as specified and as directed by Engineer-in-Charge. |
| 96 | M&L for Machine pressed Coloured (Red / Yellow) precast concrete interlocking paver block (ISI marked) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed by Engineer-in-Charge. |
| 97 | Taking down carefully or drawing out from conduit, existing copper / aluminium point wiring for light, fan, bell, socket, power point etc complete including fixture and fittings such as switches, sockets, ceiling rose, pendent holder, light fittings, top sheet covers, fan regulators, MCB, DB, earth plug, lamp, street light etc (excluding MS sunken boxes) and making good the disturbed surfaces of wall/ceiling complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
| 98 | Taking down carefully or drawing out from conduit, existing copper / aluminium point wiring for light, fan, bell, socket, power point etc complete including fixture and fittings such as switches, sockets, ceiling rose, pendent holder, light fittings, top sheet covers, fan regulators, MCB, DB, earth plug, lamp, street light etc (excluding MS sunken boxes) and making good the disturbed surfaces of wall/ceiling complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender